|
|
Mobile Pump-out unit
208L tank with overflow detector
easy to handle with large tires trailer
silent pumping (no throbbing)
made of marine aluminium and steanless steel
leak detection system
motor 1,5HP with speed variator
|
|
KECO offers an extensive line of trailer units that are recognized as the best in the business. Trailer units are ideal for marinas, campgrounds, fuel docks, industrial applications and RV parks.
Our DOT approved trailer units are custom designed to your specifications. Polyethylene tanks, up to 1,025 gallons are mounted onto Single or Double Axle trailers. Depending on the application, trailer units can be powder coated or galvanized. All trailers include pre-wired lighting and allow for easy hook-up to tow vehicles.
Flow Rate: 13-60 gpm
Vacuum Rating: Up to 29Hg
Pressure Rating: Up to 120psi
Power Options: 110V-480V, Gas & Diesel
Fuel Dock Friendly: Yes
Ideal Locations: Marinas, Dry-Storage, Campgrounds, RV Parks
|
|
KECO's portable Pumpout cart features a rugged T6-Aluminum frame, 35/55 gallon holding tank and overfill protection. With the ability to turn around in its own footprint, this cart is perfect for almost any size dock.
Options include: Peristaltic or Diaphragm pump, hour meter, trailer hitch adapter, Gas/Diesel/Electric, and One-Touch easy offload.
Flow Rate: 13-25 gpm
Vacuum Rating: Up to 28Hg
Pressure Rating: Up to 60psi
Power Options: 110V-480V, Gas and Diesel
Approximate Dimensions: 48" x 34" x 45"
Fuel Dock Friendly: Yes
Ideal Locations: Marinas, Dry-Storage, & Campgrounds
|
|
KECO has developed a manual operated Pumpout cart that carries and attractive price tag without compromising reliability. The model 425 has a 25 gallon capacity holding tank that can be gravity or pressure offloaded. Constructed of corrosion resistant materials, this low-profile cart is perfect for private use, or as a marina backup.
Flow Rate: 8-12 gpm
Vacuum Rating: Up to 16Hg
Pressure Rating: Up to 10psi
Approximate Dimensions: 66" x 30" x 44"
Weight: 87-lbs Empty / 265-lbs Full
Fuel Dock Friendly: Yes
|
|
Pump-out station
silent peristaltic pumping
leak detection system built-in
motor 1,5HP or 3HP, 110 liters/minute
run with on-off button and adjustable timer
fiberglass enclosure
|
|
Centralized Vacuum Systems are designed to provide slip-side and multi-location Pumpout service. Central pumping units (Peristaltic or Vacuum pumps) are intended to sit in a centralized area, while remote pumping centers or dockside hydrants are installed in convenient locations throughout a marina. Plumbing connects the remote pumping center or hydrants to the centralized system, while wireless transmitters or hard-wired remotes placed throughout the marina activate the pump when desired.
Call today for your free consultation.
|
|
Keco's 140 Series is a self contained, full service pumpout center. Enclosed in the fiberglass cover is a powerfull diaphragm pump, suction hose on reel, and fresh water rinse hose on reel. Available with both spring and hand rewind hose reels, the model 140 will keep hoses off the ground and under the enclosure.
Keco's rugged diaphragm pump passes solids up to 1.5" in diameter, and can be equipped with a variety of motor options. The 140 Series is a great solution for Marinas, RV parks, Campgrounds, and live aboard facilities.
Flow Rate: 18-25 gpm
Vacuum Rating: Up to 22Hg
Pressure Rating: Up to 15psi
Power Options: 110V-480V
Fuel Dock Friendly: Yes
Ideal Locations: Fuel Dock, Bulkhead, Haul-out, Fingerpiers
|
|
KECO's Stationary units, Models 150/175/200, are convenient, effective and self-contained sanitation systems. The stationary pump is capable of pumping 20-25 gallons per minute, with up to 20' suction lift and 30' discharge head. The fiberglass enclosure functions as hose storage for up to 70' of suction hose, and protects the pump from the elements.
Beneath the fiberglass cover you'll find a powerful sanitation workhorse. All pump components are assembled using non-corrosive materials, and finished with the same innovative three layer coating process found on off-shore oil rigs. This pump is designed specifically for pumping sewage, and can pass solids up to 1.5" in diameter.
Available in any color!!!
Flow Rate: 20-25 gpm
Vacuum Rating: Up to 22Hg
Pressure Rating: Up to 15psi
Power Options: 110V-480V
Approximate Dimensions: 37.5" x 15" x 47"
Fuel Dock Friendly: Yes
Ideal Locations: Fuel Dock, Bulkhead, Haul-out, Fingerpiers
|
|
Keco's Dockside Pumpout system is designed to sit at the "Point-of-Pumpout" and discharge back to a marinas sewer connection. Depending on the discharge requirements, this unit can be equipped with a low maintenance double diaphragm pump, or a heavy duty Peristaltic pump.
The Dockside enclosure includes a hose rack (capable of holding 60' of suction hose), and a variety of different activation controls. Constructed of Hand Laid Fiberglass, this enclosure is also available in Aluminum or Stainless Steel.
Flow Rate: 30-60 gpm
Vacuum Rating: Up to 29Hg
Pressure Rating: Up to 120psi
Power Options: 110V-480V
Approximate Dimensions: 38" x 38" x38"
Fuel Dock Friendly: Yes
Ideal Locations: Fuel Dock, Bulkhead, Fingerpiers
|
|
Keco's 70 Series Pumpout system features a two piece design which can be joined together, or separated by up to 100' apart. If dock space is limited, placing the pump in a remote location may be the solution. Keco's versatile Remote Pumping Center (RPC) can be equipped with a variety of different control options. The 70 series is available in Stainless Steel or Fiberglass.
The rugged design of the RPC can accommodate up to 70' of suction hose and is built to withstand the constant abuse of daily usage. Keco's 70 Series Pumpout offers a clean, simple, and manageable Pumpout for marinas and clients alike. Available with a Diaphragm or Peristaltic Pump.
Flow Rate: 13-25 gpm
Vacuum Rating: Up to 28Hg
Pressure Rating: Up to 60psi
Power Options: 110V-480V
Fuel Dock Friendly: Yes
Ideal Locations: Fuel Dock, Bulkhead, Fingerpiers & Launch Ramp
|
|
|
The robust and aesthetically designes WillDo pump-out system (for black and grey water) gives yachts in marinas the possibility to empty the waste water tank into the sewer system ashore in a hygienic and simple manner.
|
|
The presures on marina operators are increasing, from customers looking for better facilities, local authorities looking for possible revenue from improved facilities, and people looking for a cleaner environment.
The majority of marinas offer at the very least, fresh water, electricity, telephone, fuel and sometimes gas. In spite of increasing awareness, very few offer Sanitation Pump-Out Systems, which would provide an instant solution to major pollution criticisms.
The reasons offered for not installing pump-out equipment include a perceived lack of demand, a fear or lack of understanding of systems and additional equipment and last but not least, cost.
Electro-Tec can provide solutions to accomodate any requirements. From stand alone pump out stations to a full vacuum system to individual berths whatever the budget.
|
|
Rolec offer a comprehensive range of 'free-to-use' or 'pay-to-use' sanitation pump-out systems to suit every budget.
Communal pump-outA range of communal pump-out pedestals are available, these can be installed by Rolec or can be supplied with simple installation instructions for you to install.
Multi-point pump-out systemsRolec can design, install and commission multi-point pump-out systems with up to 100 pump-out points on a single marina.
|
|
|
In reference to norm CE 59/2000, the Marine society Seatec Technologies Srl of recent has developed to a system of recovery and treatment of bilge waters and black waters express devised in the optical to comply, with economic solution poured them and, to over cited normative
|
|
Ideal for Outboard, Stern Drive and Inboard applications
Perfect for Boat Yards, Dealerships, and Marine Maintenance Services
Mounted on a 5-gallon bucket for easy disposal with limited to no mess
Can pump into additional buckets with having to change top for oil changes greater than 5 gallons.
Equipped with 4' long 1/4" diameter PVC tubing for extracting down through the engine dipstick
8' power cord with alligator clips
Self priming impeller driven reversible pump
12 or 24 Volt motors available
Pumps water, oil and diesel fuel
Built in fuse for motor protection
|
|
Standard Equipment:
Motor: ¼ Hp electric
Tank: 25 US Gal. (94 l)
Connections: 1 ½” NPT intake & discharge
Finish: painted blue metallic top, hot dipped galvanized cycle tank (grey zinc finish)
Included Accessories: 25 ft intake hose assembly, 2 sizes of deck adapters (1 ¼ ” & 1 ½ “), universal deck adapter & potty wand.
Features:
auto shutoff when full
manual lever valve to select between suction & discharge
easy single switch operation (OFF / ON)
indicator lights to monitor tank status (Empty / Full)
pre-wired for standard 120V power outlet (other voltages available)
|
|
Standard Equipment:
Motor: 3 Hp gas (Honda)
Tank: 115 US Gal. (435 l)
Connections: 2” NPT intake & discharge
Finish: painted white or blue metallic
Included Accessories: 33 ft intake hose assembly, 2 sizes of deck adapters (1 ¼ ” & 1 ½ “), universal deck adapter & potty wand.
Features:
auto shutoff when full
power discharge by simply shifting hand lever into discharge position - no separate pump needed to empty the pump tank
PVC sight tube to monitor fluid level in tank
pump can be boat, truck or trailer mounted
|
|
Standard Equipment:
Motor: ¾ Hp electric
Tank: 220 US Gal. (832 l)
Connections: 2” NPT intake & discharge
Finish: painted white or blue metallic top, hot dipped galvanized cycle tank (grey zinc finish)
Included Accessories: 33 ft intake hose assembly, 2 sizes of deck adapters (1 ¼ ” & 1 ½ “), universal deck adapter & potty wand.
Features:
auto shutoff when full
probe error warning sensor
easy single switch operation (OFF / Suction / Discharge)
indicator lights to monitor pump mode (Suction / Discharge / Probe Error) & tank status (Empty / Full)
pre-wired for standard 120V power outlet (other voltages available)
|
|
Standard Equipment:
Motor: 1 ½ Hp electric + 2 Hp electric compressor
Tank: 115 US Gal. (435 l) certified pressure vessel for 60 psi (4 bar)
Connections: 2” NPT intake / 2” NPT discharge with motorized ball valve
Finish: painted white or blue metallic top, hot dipped galvanized cycle tank (grey zinc finish)
Included Accessories: 33 ft intake hose assembly, 2 sizes of deck adapters (1 ¼ ” & 1 ½ “), universal deck adapter & potty wand.
Features:
auto cycling between suction and discharge as necessary
constant vacuum - automatic shut off for motor when max. vacuum is reached --> pump can be left turned on all day, vacuum will be available instantly when needed
probe error warning sensor
up to 120 ft (36 m) discharge head
odourless - odour is vented to discharge line
easy single switch operation (OFF / Suction / Discharge)
indicator lights to monitor pump mode (Suction / Discharge / Probe Error) & tank status (Empty / Full)
required power: 208-230V AC + Neutral, 30Amp. circuit min., 60 Hz (other voltages available)
|
|
Standard Equipment:
Motor: ¼ Hp electric
Tank: 25 US Gal. (94 l)
Connections: 1 ½” NPT intake & discharge
Finish: painted blue metallic top, hot dipped galvanized cycle tank (grey zinc finish)
Included Accessories: 25 ft intake hose assembly, 2 sizes of deck adapters (1 ¼ ” & 1 ½ “), universal deck adapter & potty wand.
Features:
auto cycling between suction and discharge as necessary
odourless - odour is vented to discharge line
easy single switch operation (OFF / Suction / Discharge)
indicator lights to monitor pump mode (Suction / Discharge) & tank status (Empty / Full)
pre-wired for standard 120V power outlet (other voltages available)
|
|
Pumps CEI, essential to the drainage system of the effluents of the sanitary facilities, bilge waters, hydrocarbon water charged and stored worn oils aboard ships of pleasure.
The maximum capacity of raising of the water column of each pumps is of 8 meters and the distance from repression can cover very long distances including with strong slopes or increase of quay to the vertical on more than 10 meters.
|
|
Power station of aspiration of the effluents of boats
Principle
Our range is built around a power station with vacuum. This technique consists in creating the vacuum in an intermediate tank thanks to a pump
especially conceived for this purpose. The difference in pressure from approximately 1 bar compared to the atmospheric pressure, involves the aspiration of the fluids
on a height of approximately 10 meters thanks to a pump of a real flow of 150 l/mn (9 m3/h). The fluids are thus aspired in the tank, without never passing by the pump. The vacuum pumps are equipped with filters antiodeurs to avoid any odorous gas release in the atmosphere.
Two advantages:
- practically null maintenance of the material,
- possibility of aspiring solid parts in suspension whose allowed size will be function of the diameters of passage of the selected drains.
Standards
Conformity to standards NF ISO 8099 and ISO 4567, relating to waste of the sanitary facilities on board boats.
Application
For a fixed installation, the central part of aspiration can be installed at an unspecified place of the harbor and the points of aspiration can be off-set to be close to the boats to treat. The power of the vacuum pump used and its flow allows the creation of complete networks. These networks can be set up over lengths being able to reach several hundred meters and comprising a great number of points of aspiration. Us to consult for particular request:
network with several points of aspiration, trailer, barge...
|
|
Power station of aspiration of the effluents of boats
Principle
Our range is built around a power station with vacuum. This technique consists in creating the vacuum in an intermediate tank thanks to a pump
especially conceived for this purpose. The difference in pressure from approximately 1 bar compared to the atmospheric pressure, involves the aspiration of the fluids
on a height of approximately 10 meters thanks to a pump of a real flow of 150 l/mn (9 m3/h). The fluids are thus aspired in the tank, without never passing by the pump. The vacuum pumps are equipped with filters antiodeurs to avoid any odorous gas release in the atmosphere.
Two advantages:
- practically null maintenance of the material,
- possibility of aspiring solid parts in suspension whose allowed size will be function of the diameters of passage of the selected drains.
Standards
Conformity to standards NF ISO 8099 and ISO 4567, relating to waste of the sanitary facilities on board boats.
Application
For a fixed installation, the central part of aspiration can be installed at an unspecified place of the harbor and the points of aspiration can be off-set to be close to the boats to treat. The power of the vacuum pump used and its flow allows the creation of complete networks. These networks can be set up over lengths being able to reach several hundred meters and comprising a great number of points of aspiration. Us to consult for particular request:
network with several points of aspiration, trailer, barge...
|
|
|
This system is designed to pump out the waste liquids produced by the yachting (waste water, motor oils). It is composed of 2 main element | | |
