|
|
Keco's boat mounted PUMP-A-HEAD system is the perfect on-the-water pumpout. As illustrated, the system may be mounted on a fiberglass workboat and equipped with a tank for fresh-water rinsings of customers holding tanks. Available motor/engine options include gasoline, diesel, AC and DC motors. There are many options available, please call for more details.
|
|
Mobile Pump-out unit
208L tank with overflow detector
easy to handle with large tires trailer
silent pumping (no throbbing)
made of marine aluminium and steanless steel
leak detection system
motor 1,5HP with speed variator |
|
This tough little guy pumps out at 10-15 gpm with constant vacuum. Pumping into its self-contained 30 gallon tank--it is the perfect unit for any yacht club or marina desiring to offer the easiest and cleanest equipment without a large plumbing expense.
|
|
There are hundreds of these EMP workhorse portable units in operation throughout the US and abroad. Built on a stout tubular aluminum frame with 12 inch pneumatic tires and a 55 gallon holding capacity, the Dockmate will accomplish almost any pumpout job.
|
|
The SaniSailor BilgeMate is a complete bilge water collection and filtration system. The BilgeMate integrates a high suction peristaltic vacuum pump, oil/water separator, oily waste (hydrocarbon) accumulator and Sufficient suction hose for convenient evacuation of oily bilge water from small to mid-size recreational boats. The BilgeMate can operate as a fixed station, but is also transportable on its aluminum can with pnuemauc wheels.
|
|
Keco's boat mounted PUMP-A-HEAD system is the perfect on-the-water pumpout. As illustrated, the system may be mounted on a fiberglass workboat and equipped with a tank for fresh-water rinsings of customers holding tanks. Available motor/engine options include gasoline, diesel, AC and DC motors. There are many options available, please call for more details.
|
|
Keco strives to build the best, longest lasting, and most effective diaphragm pump on the market. Keco's 50 Series pump, is a rugged, durable, and multi-purpose diaphragm pump. Also known as the "Junior," this pump is built for a variety of pumping applications.
Assembled using all .5" stainless steel nuts and bolts, and treated with a triple layer coating, the Model 50 is built to last! New Encapsulated valves packs provide tight seals and impressive suction with every stroke. If you demand a versatile, all-purpose diaphragm pump, look no further then Keco's 50 Series.
|
|
Keco now offers an extensive line of Trailer Units that are recognized as the best in the business. DOT approved trailer units are custom designed to client specifications. Polyethylene tanks, up to 1,025 gallons, can be mounted onto a Single or Double Axle Trailer.
The trailers can be powder coated or galvanized depending on the application. All trailers have pre-wired lighting and allow for an easy hook-up with tow vehicles. The trailer units are ideal for marinas, campgrounds, fuel docks, industrial applications and RV parks. If your facility demands a high quality trailer pumpout, Keco will design a unit for you. |
|
A portable waste removal system that holds 28 gallons of waste and can be rolled to a dump station. Features pneumatic non-sparking tires, vented cap, 10 Feet (305cm) of large diameter intake hose, 3" slide valve for evacuation, molded-in baffle for strength, molded hose holders and a hand operated manual pump. Intake hose fitting has proper threads to attach to standard deck fittings (1 1/2" or 1 1/4") and a quick disconnect fitting with a shut-off valve to control flow and eliminate spillage.
Dimensions D W H
22 1/2" 27 1/2" 41"
Part #: P93-2402 |
|
Pump-out station
silent peristaltic pumping
leak detection system built-in
motor 1,5HP or 3HP, 110 liters/minute
run with on-off button and adjustable timer
fiberglass enclosure |
|
| The robust and aesthetically designes WillDo pump-out system (for black and grey water) gives yachts in marinas the possibility to empty the waste water tank into the sewer system ashore in a hygienic and simple manner. |
|
This SaniSailor SlipSide S100 is for smaller marinas and yacht clubs where pumpouts are important, but usuage and volumes may be low.
The SaniSailor SlipSide S100 operates idealy in the 10-15 gallon range and is suitable for facilities with boats that have smaller holding tanks (30-60 gallons)
|
|
This central vacuum system is a workhorse unit which will deliver 28" of vacuum to many hydrants or stanchions. This system is designed for applications requiring both hydrants at individual slips, and stanchions at common locations, within the same general area i.e. on one pier.
|
|
SANISAILOR STANCHIONS
Remote pumpout locations pedestals. They may include different options such as: on/off push buttons, an hour meter, or hose rack. All stanchions include pumpout hose connection plumbing.
|
|
The SaniSailor Sentinel M300 is designed for the most standard point of pumping application. Use the M300 with one pumpout location or several in close proximity, as on a fuel dock or convenience dock. The Sentinel M300 is designed for pumping out at up to 30 gpm, where the septic system is no more than 30ft. above the system.
|
|
The presures on marina operators are increasing, from customers looking for better facilities, local authorities looking for possible revenue from improved facilities, and people looking for a cleaner environment.
The majority of marinas offer at the very least, fresh water, electricity, telephone, fuel and sometimes gas. In spite of increasing awareness, very few offer Sanitation Pump-Out Systems, which would provide an instant solution to major pollution criticisms.
The reasons offered for not installing pump-out equipment include a perceived lack of demand, a fear or lack of understanding of systems and additional equipment and last but not least, cost.
Electro-Tec can provide solutions to accomodate any requirements. From stand alone pump out stations to a full vacuum system to individual berths whatever the budget.
|
|
Keco's 70 Seris diaphragm pump is a sleek and practial addition to any marina. The 70 Series incorporates Keco's powerful diaphragm pump, with a sleek Remot Pumping Center. This unit will compliment any dock with it's low profile design and sturdy hose rack. Keco's 70 Series provides reliable pumpout equipment without compromising dock space or esthetic appeal.
The multi-function RPC can be outfitted with a variety of options to provide additional services to your clients. The rugged design of the RPC can accomodate up to 70' of suction hose and is built to withstand the constant abuse of daily usage. Keco's 70 Series pumpout offers a clean, simple ande manageable pumpout for marinas and clients alike. |
|
Keco's 140 Series is a self contained, full service pumpout center. The 140 Series offers a variety of user services from a single pumpout enclosure. The pumpout equipment enclosed in the attractive fiberglass cover, is the always reliable Keco diaphragm pump.
Keco's diaphragm pump is capable of passing solids up to 1.5" in diameter, and can be equipped with a variety of motor options to best suit the application. Keco's 140 Series is a great solution for Marinas, RV Parks, Campgrounds, and live aboard facilities. |
|
Keco's stationary units, Model 150/175/200, are convenient, effective and self-contained pumping systems. Keco's stationary series is capable of 20-25 gallons/minute, 20' suction lifs, and 30' discharge head.
The fiberglass enclosure functions as hose storage for up to 70' of suction hose, and protects the pump from the elements. The stationary series diaphragm pumps are ideal for fuel docks, blukheads and finger piers. |
|
| KECO'S 900 SERIES DOCKSIDE PERISTALTIC PUMP. 35GPM, 800' SUCTION, 29Hg. 110/220V 50/60hZ. CLEAR VIEWING WINDOW, LEAK DETECTION SHUTDOWN, STAINLESS STEEL FRAME, DIRECT DRIVE GEARBOX (NO COUPLERS, BELTS, OR PULLIES). 3 YEAR MANUFACTURER WARRANTY. CALL FOR MORE INFORMATION. |
|
Ideal for Outboard, Stern Drive and Inboard applications
Perfect for Boat Yards, Dealerships, and Marine Maintenance Services
Mounted on a 5-gallon bucket for easy disposal with limited to no mess
Can pump into additional buckets with having to change top for oil changes greater than 5 gallons.
Equipped with 4' long 1/4" diameter PVC tubing for extracting down through the engine dipstick
8' power cord with alligator clips
Self priming impeller driven reversible pump
12 or 24 Volt motors available
Pumps water, oil and diesel fuel
Built in fuse for motor protection |
|
Standard Equipment:
Motor: ¾ Hp electric
Tank: 220 US Gal. (832 l)
Connections: 2” NPT intake & discharge
Finish: painted white or blue metallic top, hot dipped galvanized cycle tank (grey zinc finish)
Included Accessories: 33 ft intake hose assembly, 2 sizes of deck adapters (1 ¼ ” & 1 ½ “), universal deck adapter & potty wand.
Features:
auto shutoff when full
probe error warning sensor
easy single switch operation (OFF / Suction / Discharge)
indicator lights to monitor pump mode (Suction / Discharge / Probe Error) & tank status (Empty / Full)
pre-wired for standard 120V power outlet (other voltages available) |
|
Standard Equipment:
Motor: ¼ Hp electric
Tank: 25 US Gal. (94 l)
Connections: 1 ½” NPT intake & discharge
Finish: painted blue metallic top, hot dipped galvanized cycle tank (grey zinc finish)
Included Accessories: 25 ft intake hose assembly, 2 sizes of deck adapters (1 ¼ ” & 1 ½ “), universal deck adapter & potty wand.
Features:
auto shutoff when full
manual lever valve to select between suction & discharge
easy single switch operation (OFF / ON)
indicator lights to monitor tank status (Empty / Full)
pre-wired for standard 120V power outlet (other voltages available) |
|
Standard Equipment:
Motor: 3 Hp gas (Honda)
Tank: 115 US Gal. (435 l)
Connections: 2” NPT intake & discharge
Finish: painted white or blue metallic
Included Accessories: 33 ft intake hose assembly, 2 sizes of deck adapters (1 ¼ ” & 1 ½ “), universal deck adapter & potty wand.
Features:
auto shutoff when full
power discharge by simply shifting hand lever into discharge position - no separate pump needed to empty the pump tank
PVC sight tube to monitor fluid level in tank
pump can be boat, truck or trailer mounted |
|
Power station of aspiration of the effluents of boats
Principle
Our range is built around a power station with vacuum. This technique consists in creating the vacuum in an intermediate tank thanks to a pump
especially conceived for this purpose. The difference in pressure from approximately 1 bar compared to the atmospheric pressure, involves the aspiration of the fluids
on a height of approximately 10 meters thanks to a pump of a real flow of 150 l/mn (9 m3/h). The fluids are thus aspired in the tank, without never passing by the pump. The vacuum pumps are equipped with filters antiodeurs to avoid any odorous gas release in the atmosphere.
Two advantages:
- practically null maintenance of the material,
- possibility of aspiring solid parts in suspension whose allowed size will be function of the diameters of passage of the selected drains.
Standards
Conformity to standards NF ISO 8099 and ISO 4567, relating to waste of the sanitary facilities on board boats.
Application
For a fixed installation, the central part of aspiration can be installed at an unspecified place of the harbor and the points of aspiration can be off-set to be close to the boats to treat. The power of the vacuum pump used and its flow allows the creation of complete networks. These networks can be set up over lengths being able to reach several hundred meters and comprising a great number of points of aspiration. Us to consult for particular request:
network with several points of aspiration, trailer, barge... |
|
Power station of aspiration of the effluents of boats
Principle
Our range is built around a power station with vacuum. This technique consists in creating the vacuum in an intermediate tank thanks to a pump
especially conceived for this purpose. The difference in pressure from approximately 1 bar compared to the atmospheric pressure, involves the aspiration of the fluids
on a height of approximately 10 meters thanks to a pump of a real flow of 150 l/mn (9 m3/h). The fluids are thus aspired in the tank, without never passing by the pump. The vacuum pumps are equipped with filters antiodeurs to avoid any odorous gas release in the atmosphere.
Two advantages:
- practically null maintenance of the material,
- possibility of aspiring solid parts in suspension whose allowed size will be function of the diameters of passage of the selected drains.
Standards
Conformity to standards NF ISO 8099 and ISO 4567, relating to waste of the sanitary facilities on board boats.
Application
For a fixed installation, the central part of aspiration can be installed at an unspecified place of the harbor and the points of aspiration can be off-set to be close to the boats to treat. The power of the vacuum pump used and its flow allows the creation of complete networks. These networks can be set up over lengths being able to reach several hundred meters and comprising a great number of points of aspiration. Us to consult for particular request:
network with several points of aspiration, trailer, barge... |
|
| In reference to norm CE 59/2000, the Marine society Seatec Technologies Srl of recent has developed to a system of recovery and treatment of bilge waters and black waters express devised in the optical to comply, with economic solution poured them and, to over cited normative |
|
Standard Equipment:
Motor: ¼ Hp electric
Tank: 25 US Gal. (94 l)
Connections: 1 ½” NPT intake & discharge
Finish: painted blue metallic top, hot dipped galvanized cycle tank (grey zinc finish)
Included Accessories: 25 ft intake hose assembly, 2 sizes of deck adapters (1 ¼ ” & 1 ½ “), universal deck adapter & potty wand.
Features:
auto cycling between suction and discharge as necessary
odourless - odour is vented to discharge line
easy single switch operation (OFF / Suction / Discharge)
indicator lights to monitor pump mode (Suction / Discharge) & tank status (Empty / Full)
pre-wired for standard 120V power outlet (other voltages available) |
|
Standard Equipment:
Motor: 1 ½ Hp electric + 2 Hp electric compressor
Tank: 115 US Gal. (435 l) certified pressure vessel for 60 psi (4 bar)
Connections: 2” NPT intake / 2” NPT discharge with motorized ball valve
Finish: painted white or blue metallic top, hot dipped galvanized cycle tank (grey zinc finish)
Included Accessories: 33 ft intake hose assembly, 2 sizes of deck adapters (1 ¼ ” & 1 ½ “), universal deck adapter & potty wand.
Features:
auto cycling between suction and discharge as necessary
constant vacuum - automatic shut off for motor when max. vacuum is reached --> pump can be left turned on all day, vacuum will be available instantly when needed
probe error warning sensor
up to 120 ft (36 m) discharge head
odourless - odour is vented to discharge line
easy single switch operation (OFF / Suction / Discharge)
indicator lights to monitor pump mode (Suction / Discharge / Probe Error) & tank status (Empty / Full)
required power: 208-230V AC + Neutral, 30Amp. circuit min., 60 Hz (other voltages available) |
|
With the increasing attention for our environment we understand also that overboard pumping off wastewater must stop. The overboard pumping exists of wastewater from toilets and oil contaminated water from the bilge. The Government has an increasing interest for this problem. In short notice marinas are obliged to have a provision for collecting wastewater (toilet water, bilge water) from vessels. Meanwhile we have in Holland about 250 pumps in use.
SP5 stand alone pump-out station for sewage or bilge wastewater
The SP5 pump-out housing can be designed for the purpose of either sewage pump-out or oil-contaminated wastewater. The stainless steel housing can optionally be used as a leakage tank. The suction hose is fitted inside the enclosure when the pump is out of use and so protected against unauthorised use. The roll-hatch can be locked when out of service.
Operation by on/off switch; coin-op unit or alternatively with our SEP-CARD or SEP®-Key |
|
|
|
