|
|
ELECTRICAL EQUIPMENT (MH6 & MH9)
Whilst Walcon does not manufacture marina electrical equipment. We have ensured that suitable units will fit our equipment. The modules illustrated (MH6) are manufactured by Sureline Electrical Modules Limited & Rolec Services Limited (Alternative types of equipment available from other manufacturers). The units incorporate walkway light, Miniature Circuit Breakers and Earth Leakage Circuit Breakers for both sockets mounted on the casing or remotely fixed. Various specifications for the rating and number of sockets are available. A remote socket outlet type MH9 can be supplied for use with the main control module.
|
|
Three Phase Pedestals
Large boats and super yachts demand a large electrical supply and the Maricer Three Phase Pedestal Range can accommodate this requirement. Shown here with two 400V 63A 3 Pin + Neutral + Earth IP67 Socket Outlets, each socket outlet is protected by an earth leakage and over current device. A 4 Pole isolator is incorporated into the design to enable safe pedestal isolation. As with all pedestals in the Maricer Range, illumination can be via 16W 2D lamps or LED with photocell 'dusk to dawn' operation
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
One of our most popular units, the all-purpose Lighthouse pedestal has a wide range of features.
With units in service around the world, this stylish power pedestal is recognized for its practicality and exceptional durability.
Available with Digital Electronic Metering (One, Two or Three Element Meters Available)
|
|
PHOCEA RANGE
distribution of water and electricity (4 sockets max)
structure made of polyester armed fiberglass
integrated lighting
differential breaker 30mA
energy control in option
colour in option
ELECTRIC METER IN OPTION
WATER METER IN OPTION
|
|
DM2I/DM4I Metered Option
Two or Four Way Bollards with the metering option. A range of meters can be supplied from the 100A rated Ofgem Approved meter primarily used in the two way unit to the din rail mounted single module 32A rated version utilised in the four way unit. Computerised metering and energy control can also be provided and an alternative brochure covering this option is available upon request. Illumination is provided by means of 2D 16 control gear and lamp along with a 6A Single Pole MCB and P12R Photocell.
|
|
Stainless Steel Pedestals
Manufactured from 1.0mm 316 Grade Stainless Steel, this pedestal range incorporates all the benefits of our PVC internal chassis and base plate with a tough stainless steel skin suitable for marine environments. All the usual configurations are available including water, TV and three phase options. The product can also be offered in 304 Grade Stainless Steel for less harsh environments.
|
|
Service Utility Pillar
Your boatyard or canal location may require the most durable and vandal resistant connection pillar possible. You can have ultimate control of access to the socket outlets and switchgear by means of the lockable door. Up to four 16A 2 Pin + Earth Socket Outlets are located on the aluminium chassis with the switchgear behind a reset flap. The pillar is manufactured from 5.0mm S235 hollow section with a 300mm mounting base. 16A supply plugs can be in place in up to four outlets and the door then locked shut.
|
|
The TallyKey T6-pedestal was developed for the supply of electricity and water in marinas and harbours.
The pedestal's elegant and maritime design makes a positive contribution to the guests' general impression of the harbour - and the choice of materials makes it robust and maintenance-free.
All T6 pedestals are supplied with lighting in the top in the form of two 11 watt low-energy bulbs, safely placed behind an impact resistant plastic cover.
The pedestal can therefore be used solely to provide elegant lighting, or in combination with the provision of power and water.
The T6's many possible combinations make it the market's absolutely most useful and flexible power and water supply pedestal.
We make the T6 to order in accordance with individual needs and wishes, ensuring that you gain the greatest possible return on your investment.
|
|
|
The Spinnaker pedestal is a new and exciting development from Rolec. It has been designed to compliment any marina, offering a truly modern approach to the world of marina services. The Spinnaker is constructed in hard-wearing GRP, with the outer surface coated in a high-quality gel coat resin as used by today's modern boat manufacturers. If you want to make a statement then the Spinnaker is as good as it gets. Unlimited colours for SpinnakersThe gel coat resin used to final coat the Spinnaker is available in almost unlimited colours.
|
|
|
The Ocean range is a highly sophisticated range of products developed to give the marina a real sense of class. Each Ocean pedestal is manufactured to suit the individual customer's personal requirements, this includes the width, depth and height of the unit. The Ocean pedestal is fabricated in 316L mirror polished stainless steel complete with hinged lockable door, locking away the switchgear.
|
|
From the company that is known for its high quality innovations, Eaton is the only company to offer a self-contained dual phase MegaYacht Unit. Made out of long lasting stainless steel, this MegaYacht Unit has a copper-wound, low noise transformer that is double insulated and epoxy overcoated.
These transformers are so tough that they have been submerged during a hurricane then washed and dried and are again in daily service (We don't recommend this test).The MegaYacht Unit delivers both single phase and three phase power to serve most mega yachts. Helping to keep your marina environment tranquil, the MegaYacht Unit has a low noise, highly efficient transformer that has isolation mounts to ensure a very quiet operation.
|
|
QUAI'OPS RANGE
IDEAL FOR HIGH POWER AND PULBIC PLACE
IP55 enclosure
made of aluminium
Rain-proof top
water and electricity distribution
|
|
Module Built in compliance with CE and lEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
|
Rolec has the largest range of super yacht services available in the marina services industry. The Megamaster was designed clearly with the super yacht in mind. This unit is completely adaptable and can be manufactured to suit your exact requirements. The Megamaster is constructed around a heavy-duty aluminium chassis and can be finished with one of three different outer covers. Electricity provided by the Megamaster can reach up to 600amp three phase with water supplies up to 3".
|
|
Characteristic Electrical workers
Nominal tension: 240/400V
Nominal frequency: 50/60HZ
Nominal current: 63 To
Switch gen. max: 4P-63A-10kA
Taken max: 3P+N+E - 32 To
Morsettiera max: 16 mm2
Normative standard: EN 60947-1
EN 60439
|
|
|
The new line of services distribution Jolly Magnum has been designed to offer a strong and harmonic product for all those situations where safety and aesthetics have to coexist in the respect of the regulations in force. These distribution boards for outside are realized with materials of great resistance to corrosion and painted with polyester powder coating to maintain their characteristics for a long time.
|
|
CORALIA RANGE
structure made of polyester armed fiberglass and marine steanless steel (316L)
IP55 enclosure
differential breaker 30mA
integrated lighting
energy control in option
large choice of colour in option
electric socket single-phase or 3-phases
up to 125A
|
|
The fixed energy supply unit is designed to facilitate multiple, 16A, 32A and 63A low pressure connections.
It comes in the simple version (for up to 6 16A sockets) or double version (up to 12 16A sockets), in the power dispensing version, in the water dispensing version as well as a mixed utilities dispensing version: power and water.
The great sturdiness of the energy dispensing column makes it ideal to be permanently installed in public areas.
Simple version
Ground level measurements: L 470 x I 330mm
Height: 900 mm
Three parts: a base, a body module and a cast aluminium casing.
|
|
|
Rolec has the largest range of super yacht services available in the marina services industry. This Maxi Classic bollard is the perfect answer to providing services to a boat that demands everything. The Maxi can offer services up to 400amp three phase complete with water supplies up to 2", with either aluminium or stainless steel bodies. It can cope with every demand. Add TV, telephone and illumination and the Maxi offers your berths a complete service.
|
|
Additional accessories (light columns, cleats, fire posts)
Additional accessories make a stay in the marina as convenient and safe as possible. Available items include:
* Light columns with water supply taps and electricity sockets illuminate the moorings
at night and provide water and electricity for the berthed boats
* Cleats and fenders for yachts and motor boats enable mooring of mixed boats
* Fire safety posts guarantee fire safety of the boats during their stay in the marina
* Wooden decking, gangways, ladders, foot bridge rails made of larch are low cost,
durable and economical
|
|
The new Terminal Boat, conceived and designed by Coelin in cooperation with the best industrial designers, is offering a simple and elegant line that can supplement and enrich tourist ports, piers and marinas.
It is perfectly suitable for distributing and controlling electric energy and drinkable water. Moreover, it is complete with low-consumption lamps that can light the floor surface.
A practical door with a key lock can give access to all control and protection
members. The two-face structure is completely made of AISI 316 stainless steel, which can be polished, glazed or painted to meet the customer's requirements.
Specifically conceived for extremely heavy-duty operation, it can provide for
excellent impact strength and durability.
|
|
|
|
|
|
|
The Hatteras Light and the Lighthouse use the same light assembly, providing a 360 degree light pattern. This light pattern is important in a marina because it lights both the dock and finger piers, yet does not shine in the boats because it's directed downward. Best of all, the bulb will last about 3 years and costs about 30 cents per month to operate.
The Hatteras Light is just 30" tall, and can be equipped with two 20 amp GFI or two 30 or 50 amp marine receptacles or a combination of 20, 30, and 50 amp receptacles. Introduced in 1993 and with thousands in service, this popular unit offers a low cost alternative to the Lighthouse for smaller boat applications. The attractive Hatteras Light will welcome your guest in style. They're great not only for marinas, but also for your dock, pool, lawn and deck area. To guarantee durability, the Hatteras has also been tested by Underwriters Laboratories.
Main Features include:
Photocell controlled 13 watt fluorescent light provides 360 degree lighting
20 amp GFI duplex receptacle and thermal magnetic circuit breaker
30 amp 125v marine twist lock receptacle and thermal magnetic circuit breaker
50 amp 125/250v marine twist lock receptacle and thermal magnetic circuit breaker
Hose bib and adapter/cable brackets
Tough thermoplastic housing with two-part polyurethane paint with UV inhibitor
Rated up to 100 amps with loopfeed copper bus bars
7.5" square mounting base and a maximum diameter of 13.5" around top of pedestal
Easy replacement of breakers, receptacles, meters, and lights
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
TV/phone connections with weatherproof cover
|
|
|
|
|
|
|
Five years of development and thirty prototype models have yielded the most innovative mini-power center available. The Newport Harbor Mate represents the leading edge of Marina Power and Lighting equipment with more features than any other unit for its size. This rugged unit can be mounted on a piling, a dock box, or a pedestal. As with all Eaton's Marina Power and Lighting equipment, it meets the strict Underwriters Laboratories standards.
Main Features include:
Receptacles surface-mounted at top of unit for easy replacement and meet NFPA 303 3-14.1c's required 24" above the dock when mounted on a 30" dock box
30/50/20 amp receptacles available
Downward indirect lighting
Loopfeed copper bus bars
Easy-mounting brackets for piling, dock box, pedestal, or covered dock uprights
Phone & cable TV outlets available
Thermoplastic housing with lifetime warranty
Door hinge not pop riveted
Housing completely non-conductive
Galvanized, stainless, or aluminum pedestals available
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
Water available with pedestals
|
|
Truly the flagship of our unitized pedestal line, the Admiral SS possesses amperage capabilities up to 500 Amps and voltages of 480/277Three Phase, 120/240 Single Phase and combinations of these receptacles all in one unit to serve nearly any size MegaYacht.
Standard Features:
Heavy Stainless Steel Housing that is Powder Coated with a Polyester Resin and Over-coated with a Heavy Clear Coat
Hardwire Capability for any One Voltage
Four 100A Receptacles of any Two Voltage Combinations such as 277/480 Three Phase, 120/208 Three Phase, or 120/240 Single Phase
When the 100A 120/240V Receptacles are Used, Two 50 Amp 120/240V Receptacles can also be Provided for a Total of 500 Amps
Photocell Controlled 13 Watt Fluorescent Light with Clear Lens that Provides 360 Degrees of Lighting
Backlit Faceplate For Easy Receptacle Plug-in at Night
|
|
|
|
|
|
|
For the longest lasting marine power pedestals, nothing is better or will last longer in the marine environment than our new stainless steel housing. We have worked more than two years to design a stainless steel pedestal that would meet all the codes and marine requirements, yet be easy to install and most importantly be maintenance free and user friendly.
Main Features include:
Available with Lockable doors that fully close
Photocell controlled 13 watt fluorescent light provides 360 degree lighting availabe in in clear or amber lenses
Corrosion resistant fine stranded tin plated copper wire for flexibility
Hose and cable brackets and 3/4 inch hose bibs with stainless steel handles
Maintenance free stainless steel housing with Lifetime Warrant
Rated 250 to 500 amps with copper bussing which allows for 20, 30, 50 amp receptacles
Electronically metered for direct or computer readouts
Easy replacement of breakers, receptacles, meters, and lights
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
Dual water hook-ups and TV/phone connections
|
|
CALYPSO RANGE
distribution of water and electricity (4 sockets max)
structure made of polyester armed fiberglass
integrated lighting
differential breaker 30mA
energy control in option
colour in option
|
|
PHOCEA RANGE
distribution of water and electricity (4 sockets max)
structure made of polyester armed fiberglass
integrated lighting
differential breaker 30mA
energy control in option
colour in option
|
|
African Ivory Pedestals
If your looking for a stylish pedestal either to match the finish on your pontoon or to offer a contrast to enhance it's appeal, the African Ivory Range is all you need. Manufactured from 4.0mm Acrylic Capped ABS the plastic has a 'pinseal' finish to add extra scratch resistance, ideal on a busy pontoon.
The two sizes shown here are the 840mm and 600mm high units.
The alternative 1130mm high unit can also be supplied within this range along with varying levels of equipment to suit your needs.
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
|
|
