|
|
transformer - model 3380
A multifunctional hydraulically powered custom platform.
It can be installed aft and serves as a gangway, swim ladder,
tender lift and loading platform. When fully opened horizontally
it triples the size of the stern platform. Twelve versions are
available with 4, 5 or 6 steps and load capacities ranging
from 100 up to 1.650 kg
|
|
TORCELLO Tenderlift
Lifting capacity 600 kg
Stainless steel structure with completely automatic movement dedicated to the lifting and descent of the platform. The size of the lifting arms are adjusted according to the specific requests of the shipyards.
MURANO Tenderlift
Lifting capacity 1000 kg.
Stainless steel structure with completely automatic movement dedicated to the lifting and descent of the platform. The size of the lifting arms are adjusted according to the specific requests of the shipyards.
|
|
tender serie 3300
Hydraulically powered stern platform lifting mechanisms facilitating the launching and hauling of dinghies, tenders and acquascooters. Constructed in AISI 36 L stainless steel with either two, three or more arms the mobile platforms have a working load ranging between 500 and 1.000 kg and are supplied complete with a torsion bar and a hydraulic piston safety device with adjustable plates.
|
|
Båtsystems new genuine quality bowspring provides both comfort and security for the smaller motorboats and day cruisers. The bowspring makes the embarking and disembarking much easier from docks and shores.
With a variety of ladders that can be mounted on top or under the bowspring the combinations gives the boat owner a solution that fits his needs and demands to the fullest. The Bowspring is fitted with universal fittings that makes the bowspring so flexible that it can be mounted on almost any type of motorboat from 16-25 foot. The bowspring is manufactured of teak and stainless AiSi 316 steel, polished to a high gloss finish.
|
|
Bow spring for boats with gennaker, 50-60 m2. Manufactured of teak and machine polished, stainless AISI316 steel.
A bow spring will make wonders for your boating experience. Easier anchoring functionality, better gennaker sailing and higher accessibility when boarding or disembarking the boat. Thanks to our unique special designed fastening brackets the bow spring will always fit perfectly.
|
|
Bow spring for boats 33’-45’. Manufactured of teak and machine polished, stainless AISI316 steel.
A bow spring will make wonders for your boating experience. Easier anchoring functionality, better gennaker sailing and higher accessibility when boarding or disembarking the boat. Thanks to our unique special designed fastening brackets the bow spring will always fit perfectly.
|
|
Båtsystems bowspring provides both comfort and security for motorboats and day cruisers. The bowspring makes the embarking and disembarking much easier from docks and shores.
With a variety of ladders that can be mounted on top or under the bowspring the combinations gives the boat owner a solution that fits his needs and demands to the fullest. The Bowspring is fitted with universal fittings that makes the bowspring so flexible that it can be mounted on almost any type of motorboat. The bowspring is manufactured of teak and stainless AiSi 316 steel, polished to a high gloss finish.
|
|
|
TELESCOPIC AND HYDRAULIC BOARD It is built in stainless steel with polished teak gratings and contained inside a watertight stainless steel tank conceived as a bearing structure. Maximum static load on the mobile part 800 kg. The platform handling is realized with an hydraulic pump and an electronic gearbox provided as optional. Possibile modifications on measures and capacities at customer request.
|
|
|
TENDER LIFT "HERCULES" Last born at Pin-Craft’s, the tenderlift PN-TL, represents the most suitable solution for the operations of hauling and launch of tender, jetsky and motoscooter. This hydraulic platform , elegant and strong at the same time, guarantees the lowering of the stern deck under the water surface.
|
|
Bathing platform manufactured of teak and stainless AiSi 316 steel, polished to a high gloss finish.
Designed to fit all gigs.
|
|
Bathing platform manufactured of teak and stainless AiSi 316 steel, polished to a high gloss finish.
Designed to fit all boats.
|
|
Bathing platform manufactured of teak and stainless AiSi 316 steel, polished to a high gloss finish.
Designed to fit all boats.
|
|
Bathing platform manufactured of teak and stainless AiSi 316 steel, polished to a high gloss finish.
Designed to fit boats with stern rudder.
|
|
Bathing platform manufactured of teak and stainless AiSi 316 steel, polished to a high gloss finish.
Designed to fit all boats.
|
|
- manually or hydraulically swivelling dinghy restorage
- mounting on the bathing platform or on the flat of the stern
- high polished or coated
- PVC insertion is adjusted to the hull of the dinghy
|
|
Troublefree parking
Coming back from the trip with your tender - how do both of you board? It can be as easy as this: With the radio remote control you extend the Marinelift platform and lower it into the water. You drive with your tender on the platform of the anchored yacht. The rails gives you guidance.
With the radio remote control you lift the platform together with the tender out of the water to the deck level. Then you drive with the platform horizontally towards the yacht. In order to protect other people in this area, the Marinelift switches to the safety mode before docking.
Whether alone after the ride with your tender or together with friends before the party on board – there is no more comfortable boarding with your tender. Once the platform is docked, all passengers can leave the tender dry. If your yacht has a boat garage, the garage door can be opened and closed via the Marinelift’s radio remote control.
|
|
Properly celebrating
On small and medium-sized yachts space might be a kind of luxury. With the Marinelift SliderParty you may allow yourself this luxury more often: In party position the boat will be lengthened by the platform. With the rail you may use it up to the platform edge – for celebration or sunbathing is your decision.
In the cruising position the platform lengthens your yacht just slightly. Due to the use of seawater resistant aluminium and the GRP platform the Marinelift is very light. If necessary, the weight of the Marinelift and the tender can be compensated by additional floating bodies. Your joy in cruising remains unchanged.
The secret of the Marinelift SliderParty is its sophisticated motion: While cruising the platform is retracted up to the stern. To use the platform it is at first slided out, and then lifted in the party position or lowered into the diving position.
|
|
Smooth diving
Up to now you descended by the use of a swimming ladder - today you plunge in with the Marinelift StandardPlus. Thanks to the great diving depth of the platform, passengers can easily enter and leave the platform – if necessary a rail offers you additional security.
In the cruising position the platform prolongs your yacht. You are gaining additional space for your leisure activities on deck if you do not want to dive. Sockets for a tender or even the use of a sunshade are possible. You decide what’s the most fun to you.
In the diving position the Marinelift StandardPlus dives deeper than the Standard version. This is possible due to the horizontal displacement of the platform during the diving process. When approaching the platform of the yacht, the automatic safety mode secures your bathing fun.
|
|
Just enjoy
This Marinelift system offers you the the full boat delight – now also for yachts with Z-drive – either in water or on board:
- great diving depth thanks to design
- suitable for salvaging a tender
- revaluing design
- easy retrofit
Clean-cut the Marinelift Standard secures perfectly to your boat. In the cruising position the platform lengthens the boat. Thanks to the use of seawater resistant aluminium and GRP platform, the Marinelift is very light. The original ladder can be used via a panel retro fit kit.
When tilting, the platform moves in a curve to the the diving position. The platform is secured against undesired use in each position. When moving towards the boat the Marinelift switches automatically into the safety mode, and thus guarantees a safe bathing fun.
|
|
|
The “Nautical-Lift” is a unique lift apparatus, manufactured from 316-L grade stainless steel, and designed to transport a vessel’s swim platform in and out of the water. The lift structure ‘Hides’ below the swim platform, out of direct view while the swim platform is raised. Its stainless steel structure and hydraulic components, naval bronze bushings and anodic protection ensure that it will offer years of sea duty living at the waterline of the vessel.
|
|
Armstrong's Telescopic Deck Mount Ladder is designed to flush mount either in a fabricated pocket, or in the same area as the rope locker. This mounting design allows you to mount the ladder on the stern or on the bow of the boat. The center pole telesopes, making it easy to deploy and the ladder stores in its own compartment unobstructing the lines of the boat. The Deck Mount Telescopic Ladder will mount on any horizontal surface.
- Deployable from the Water
- Meets ABYC H-41 Standards
- Telescopic Center Pole
- Stainless Steel Construction
- Flat Steps with Molded Tread
- Comfort Angled like a Step Ladder
- "Fin Friendly" Design
- In or Out of the Water Use
- 3 and 4-Step Versions
- Rated to 400 pounds
- Compact
- Patent Pending
|
|
|
Telescopic ladder in casing, 3 steps with locking. Manufactured of machine polished AiSi316 stainless steel.
|
|
Retractable swimming/emergency ladders constructed with
extra-wide, comfortable steps which can easily be accessed by
pulling the sliding ladder down below water level.
|
|
Fixed Platform Ladder
3 Step portafino Platform style. Hand rails incorporated in the design to safely and easily assist boarding.
|
|
| ... products without information |
| |
|
|