|
|
SEAJET UNYTHANE TOPCOAT is an urethane-alkyl based gloss finish wit hthe following advantages:
-good gloss and gloss retention
-resistant to minor knocks
-can be used on interior and exterior areas above the waterline
-easy to apply and obtain a good finish
|
|
Recommended for Ultimate performance two component topcoat
Main benefits Long term gloss and colour retention Very tough and durable finish
Pack size 2.5lt, 1lt
|
|
NAUTIX GRIP :Transparent non skid paint
|
|
Nautix DB: Bilges and locker paint.
|
|
- Superior Coverage.
- Can be directly applied to hitherto "unpaintable" surfaces.
- Flexible - will not crack, peel, or blister. Will not yellow.
- Environmentally responsible in every way - non-toxic, non-flammable, and no hazardous waste. No odor when applied.
- Non-carcinogenic - no hydrocarbons.
- Thins with water because it is water based! Cleanup with water!
- Anti-Static. Dirt will not adhere. Maintenance Free.
- No primer required, except on steel.
- Apply with HVLP equipment.
- Color coat dries immediately. Apply clear coat the same day, if desired!
- Color will not fade!
- Long lasting
|
|
L2 : High gloss 2-pot polyurethane enamel
|
|
|
Interdeck is a tough polyurethane low sheen deck coating containing a fine mineral aggregate providing a hard wearing, slip resistant surface. It is easy to apply, by brush or roller, on all substrates.
|
|
A hard wearing and chemical resistant coating for the protection of bilges, lockers and bulkheads from moisture penetration and general wear and tear.
Danboline is an easy to clean coating and is resistant to oil and fuel spillages.
|
|
Awlgrip Topcoat is a polyester based high gloss topcoat giving long lasting gloss and color retention.
Awlgrip Metallics is a high gloss topcoat used to create a special effect finish.
|
|
When topcoat application conditions are far from ideal, Awlcraft 2000
is the coating that will deliver a smooth, high gloss finish.
Producing a rich lustrous finish similar to our famous Awlgrip, Awlcraft 2000 is ideal for use in situations where dust or fluctuating temperatures are a potential problem or where faster project turn-around time is critical.
Its unique, fast drying formula helps reduce dust-free time between coats.
Easy application
Quick drying
Long lasting, mirror-like finish
For use above the waterline only
Custom colors available
Awlcraft 2000 Acrylic Urethane Topcoat- See Stock List for F color codes on the website.
|
|
OVERVIEW:
Rust-Oleum Marine Coatings Topside Paint provides gloss retention and UV resistance in extreme weather conditions. Apply to fiberglass, wood or metal surfaces above the waterline. Flexible formula is easy to apply.
PRODUCT FEATURES:
- UV resistance
- Gloss retention
- Durability in extreme weather conditions
|
|
|
Brightside® is a polyurethane yacht finish containing the unbeatable strength and durability of Teflon®. This produces a tough, high-gloss easy-clean surface that is remarkably resistant to abrasions, stains, chemicals and dirt.
|
|
|
A high performance, extremely tough, long-lasting two pack undercoat for use under Perfection® finish. The semi-gloss finish allows easy checking of hull fairness. Excellent covering power (opacity).
|
|
Awlgrip Topcoat is a polyester based high gloss topcoat giving long lasting gloss and color retention.
Awlgrip Metallics is a high gloss topcoat used to create a special effect finish.
|
|
SEAJET GLOSSKEEP TOPCOAT is the ultimate performance, one component gloss finish with the following advantages:
-maximum performance gloss with excellent colour retention
- resistant to minor knocks
- can be used on iterior and exterior areas above the waterline
-easy to apply and obtain a beautiful finish
|
|
| ... products without information |
| |
NAUTIX GRIP :Transparent non skid paint
|
|
|
Interdeck is a tough polyurethane low sheen deck coating containing a fine mineral aggregate providing a hard wearing, slip resistant surface. It is easy to apply, by brush or roller, on all substrates.
|
|
Fine glass powder which can be scattered into the still wet coating if an additional anti-slip effect is required.
approx. 100 - 200 g/m²
|
|
Rust-Oleum Marine Coatings Anti-Slip Additive mixes with oil- or latex-based paints. Apply to wood, metal, fiberglass or concrete. Provides a skid-resistant coating that won’t change the color, performance or properties of paints.
PRODUCT FEATURES:
- Provides a skid-resistant coating for wood, metal, fiberglass and concrete surfaces
- Will not change the color, performance or properties of the paint
- Fine pumice for mixing with oil or latex-based paints
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
