|
|
Tides Marine manufactures a wide variety of rudder bearings, rudder sleeves, rudder tubes and rudder ports (with and without seals). This product line provides builders, engineers, naval architects and repair facilities with solutions to most any problem they may encounter.
Most of these Rudder Bearing products are precision-machined from UHMW-PE, an ultra-high molecular weight polyethylene. UHMW is extremely durable, abrasion resistant and does not absorb water. It's coefficient of friction (when water-lubricated) approximates that of Teflon in these bearing products.
Tides Marine rudder bearings carry American Bureau of Shipping and Lloyds Register Type Approval.
|
|
Production of upper and lower bearings for rudderstock (for steering wheel or tiller)
Aluminium or stainless steel selfaligning bearings with plastic sphere
Aluminium bearings with plastic sphere and rollers
Selfaligning aluminium bearings with rollers
Bronze lower traditional bushings with stuffing box
|
|
|
The 41000 series Jefa rudder bearings are the first type of roller bearings that were produced by Jefa marine. In the past 20 years more than 10.000 of these bearings have been produced. This bearing is typically suitable for GRP or wood core cruising yachts where a light revolving and backlash free rudder system is required that will not be stretched to the limits as on racing yachts.
|
|
These rubber lined bearings are specially designed for water lubricated sterntubes and rudder stocks. The nitrile rubber bearing material gives the bearing a high resistance to abrasion and wear whilst providing effective noise and vibration insulation.
The bearing's outer shell is manufactured from either corrosion resistant naval brass or non-metallic material. The non-metallic shell has the advantage of being lighter and it prevents electrolytic corrosion. Non-standard sizes and flange bearings are available on request.
|
|
RUDDER BEARINGS AND ACCESSORIES
ACC Marine provides Accurate bearings in a self-adjusting standard sleeve type, self-adjusting roller or plain roller.
All bearings are manufactured from corrossion resistant materials and feature non-metallic rollers. Bearings and shaft seals are removeable for service and maintenance.
We supply rudder shaft accessories such as shaft seals, flanged bearings, bearing races, bearing housing tubes and tiller plugs.
We also offer a line of replacement bearings that will retrofit systems using Harken bearings.
|
|
|
New line of high efficiency control cables that Ultraflex and Uflex have developed in order to meet the increasing request for "high performance" cables in various configurations.
|
|
Fiberglass-reinforced composite sheet piling have a broad range of applications for earth and/or seawall construction. The vinyl sheet piling of ESP International B.V. won’t get eroded by the environment or nature, is light-weight and resistant to chemicals and frost (up to -30 °C or -22 °F). These characteristics result in a long lifecycle. In addition, the vinyl sheet piling of ESP International B.V. is entirely manufactured from recycled materials.
The sheet piling is vibrated into the ground and is then capped by a vinyl cover. We have also developed corner pieces for connecting light and medium-weight sheet piling. The sheet piling is colourfast and is available in a range of colours.
|
|
Vinyl sheet piling have a broad range of applications for earth and/or seawall construction. The vinyl sheet piling of ESP International B.V. won’t get eroded by the environment or nature, is light-weight and resistant to chemicals and frost (up to -30 °C or -22 °F). These characteristics result in a long lifecycle. In addition, the vinyl sheet piling of ESP International B.V. is entirely manufactured from recycled materials.
The sheet piling is vibrated into the ground and is then capped by a vinyl cover. We have also developed corner pieces for connecting light and medium-weight sheet piling. The sheet piling is colourfast and is available in a range of colours.
|
|
| ... products without information |
| |
3-Point safety line for SECUMAR life jackets with harness, DIN EN 1095, yellow, with SECUMAR branding, for persons over 25 kg
So that there is no sudden slipping overboard: skippers with foresight hook themselves on as soon as the sea gets rough.
|
|
The operational efficiency of a machine or plant is determined by, above all, the bearing quality at all rotating components. This applies in particular to the line-shafting of ship propulsion plants. The Simplex bearings were developed especially for this purpose as short, plain bearings. More than 21,000 have left our works to date.
Simplex bearings are characterized by a short shell length. Moreover, they can be precisely aligned to avoid edge loading. The running properties of the bearing metal have been optimized with a technically highly advanced bonding of bearing metal and shell. The vital lubrication of the bearing is safeguarded in the Simplex bearing at all times, even at low shaft speeds. Temperature sensing and monitoring systems are also supplied. Cooling systems are available for unfavourable operating conditions.
|
|
|
Navtec Wire Rigging, used in standing and running rigging, is composed of high tensile 316 steel wire. It is constructed to unlay and relay easily, and our dimensions and tensile grades meet or exceed BS MA 29 tolerances for nominal diameter, tensile strength, and breaking-force thresholds.
|
|
| ... products without information |
| |
|
|
|
|
|
Iris 50
• Good protection against hard knocks: the smooth finish feels soft in your hand, and it will notslip, even if it is wet.
• Outstanding legibility of the card, with one-degreegraduations.
• No parallax error: a prism projects the reading of the bearingto infinity. This also contributes to a more comfortable operation, as you do not need to alternate close-reading to read the card andinfinite-reading to take bearings.
• Optimum conditions to take bearings, thanks to thesuperb card stability and the wide 20°field of view, which willaccommodate the roughest sea conditions.
• Most accurate bearing: the pivot and very hard stone are a guarantee of long life and shock resistance of your compass.
• Soft bottom cell: engineered using ultra-sonic welding, it actslike an expansion diaphragm, preventing the formation of bubblesand leaks.
• Built-in photoluminescent lighting, completely maintenance-free, impervious to corrosion, operates without batteries or radio-active tritium.
• Course reading from above the compass: you can read your compass like a standard compass, with no need to lookthrough the prism.
Graduation: every 1°. Field of view: 20°. Clearance: ±12°. Built-in photoluminescentlighting. Red lubber lines. Weight: 105g.
|
|
|
Using these precision marine hand bearing compasses, you can easily obtain quick magnetic bearings on shore or floating objects. Obtain a bearing simply by aligning front and rear sights on an object and reading off bearing. Uses include quick bearing or position set, determination of angular gain or loss on the competition while racing, checking distance offshore, establishing lee-bow set while cruising or racing in currents, drift vectoring and plotting a line of position
|
|
|
The Suunto KB-20 is a hand-bearing floating compass weights only 40 g. It is an ideal instrument for marine, professional and outdoor use. The Suunto KB-20 has an accuracy that is better than 1 degree, graduation is 1° and has reverse scale.
|
|
- Easy to Read 2" Direct-Reading Dial
- Hardened Steel Pivot and Sapphire Jewel Movement
- Built-in Roller Diaphragm for Extended Temperature Operating Range
- International Safety Yellow Case
- Silicon Impact Resistant Case with Neck Lanyard
- Compact Size for Easy Handling and Storage
- QuickSight V-Notch and Lubber Line for Easy Heading Alignment
- Non-Electric Chem Sticks Provide 18 Hours of Night Lighting
- New Holder Ideal for Deck Mounting SportAbout Compasses on Small Boats
- Holder Available in Black or White
|
|
NEW IN 2002: a lubber-line for those who prefer.
Quicker and easier reading thanks to the 2-coloured markings every 5°.
NEW IN 2002: course reading from the top of the instrument with photoluminescent lighting.
- Individually tested and delivered with its NUMBERED CALIBRATION CERTIFICATE. The large movement of the compass card enables it to be used in rough seas. 4 calibration zones.
- The compass is permanently lit by the "Microtech" bulb.
This has a life span of 6 to 8 years and can then be changed for a new one.
NEW IN 2002: enlarged lighting zone.
- "Grain" finish, finger indentations, "anti-slip" notches, lower rim: IT IS EASILY HELD IN THE HAND.
|
|
A 2 1/2" (65 mm) apparent diameter dial compass with a detachable bracket mounting. The bearing can be locked with a special system. Maximum tilting angle is 30° in all directions; the bracket is angled 15° forward from vertical.
LED illumination.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
