|
|
|
|
4.95 m
16' 3"
|
|
|
|
The Dervinis 495 is an optimized and intelligent boat. It offers a light competitive hull, to face present energetic coercions. It's original deck plan should satisfy the most demanding users .Every neccessary devices is there leaving a confortable space for moving aboard.
|
|
|
|
5.60 m
18' 4"
|
|
|
Cataglop Light is a boat dedicated to the cleaning up of harbours and coastal areas, operating up to 6 nautical miles away from the shore.
Its “V” hull allows an 8 knots cruising speed and its integrated floats are built with watertight compartments.
Entirely, built out of aluminium, Cataglop Light is road gauge standard and is easily transportable on a trailer, towed by a light vehicle. It can be launched from a slipway due to its integrated wheels .
Strong points
- Improved V hull design for vessel speed combined with stability
- Integrated wheels allowing launching by only one person
- Recovery of hydrocarbons and macrowaste
- Easily transportable on its road gauge trailer
- Built in aluminium 5083
- Long distance transport by ISO 40 feet container
|
|
|
|
6.15 m
20' 2"
|
|
|
|
|
|
6.60 m
21' 8"
|
|
|
|
Ring of towage, 4 Cleats, Cabin of Guide centers completes them of steering wheel and prescribed timoneria, Electric panel, fanali, 2 rings towing, Covers of the lockers in wood and VTR.
|
|
|
|
6.70 m
22' 0"
|
|
|
|
A sea-going work boat. The Bella 7000 Sunmar is an axledriven, multi-purpose boat well suited for fishing expeditions. It features a large cockpit that offers potential for a wide range of operations.
|
|
|
|
7.05 m
23' 2"
|
|
|
LOA: 7,95 m
L,hull: 7,05 m
BOA: 2,10 m
B,hull: 2,00 m
Deadrise: 24 degrees
Dry weight: ca. 1 600 kg
Engine: 150 - 300 Hk
Fueltank: ca. 200 L
Speed: +40 knots
|
|
|
|
7.20 m
23' 7"
|
|
|
A multi-purpose boat for cleaning both hydrocarbon spills and solid waste from harbours and inland and sheltered waters...
Genuine «vacuum cleaner of the sea», CATAGLOP is especially dedicated to collecting floating solid and liquid waste.
It combines robustness and simplicity; it is also a multi-purpose boat.
It collects up floating solid waste, even in difficult-to-get-at areas :
- solid floating waste (wood, plastics, polystyrene, algae...) is collected in a pivoting basket which is automatically emptied into an on board container.
- liquid floating waste (oils and hydrocarbons) are stored floating in a separator tank.
Strong points
- Conceived within road gauge standards, it is launched by a crane.
- Simple to use, very manoeuvrable, it is provided with rollers to clean along the quayside.
- Multi-use :
- fire fighting
- suction of soiled waters
- built out of aluminium 5086
|
|
|
|
7.30 m
23' 11"
|
|
|
|
Ring of towage, 4 Cleats, Console of guide centers completes them of steering wheel and timoneria monocable, complete Drawer Object holder of drip flap and ripostiglio, Windshield with tientibene in acc. inox, Fanali Electric panel prescribed, 2 Rings towing, Covers of the lockers in VTR.
|
|
|
|
7.35 m
24' 1"
|
|
|
|
Ring towage, 4 Cleats, Console of guide centers completes them of steering wheel with timoneria onocavo, complete Drawer Object holder of drip flap and ripostiglio, Windshield with tientibene in acc. inox, Electric panel, Fanali prescribed, 2 Rings towing, Covers of the lockers in VTR.
|
|
|
|
7.50 m
24' 7"
|
|
|
|
Aluminum marine provides with its Neptune range of the solutions adapted to the work conditions of the professionals of piloting. Our boats have the role of accosting cargo liners and tankers of more than 200000 tons by guaranteeing effectiveness and safety to you.
|
|
|
|
7.62 m
25' 0"
|
|
|
The TRI-HULL SERIES is known for its ability to plane easily and quickly as well as it stability at rest. These features make it a solid hydrographic survey and oil spill response platform.
This boat can be constructed with a console, T-top, walk-around pilot house or cabin depending on your specific workboat application.
|
|
|
|
7.80 m
25' 7"
|
|
|
|
We have provided the boat with a wide-opening bow ramp for easy loading and unloading. Depending on the chosen solution, Anytec 780 BR CAB has a cabin that accommodates 4-5 persons. We offer this model with Rolls-Royce water jet. The hull maintains its properties in heavy seas. This is a boat that serves its captain all year.
|
|
|
|
7.92 m
26' 0"
|
|
|
The Landing Craft Series is a multi-purpose V hull boat with a 64%u201D wide opening bow door. Built in the traditional Workskiff tradition, it is designed to provide consistent and lasting performance in challenging environments.
The Landing Craft is typically constructed with a cabin, Walk-Around Pilot House, Console or T-Top and can be outfitted with a variety of accessories to meet your specific workboat application.
|
|
|
|
8.23 m
27' 0"
|
|
|
Workskiff's T-TOP SERIES are highly durable workboats designed for military, commercial and rugged recreational use. Available in 19' to 27' lengths, each features a 24' or 36' wide all-welded aluminum T-Top console with a tempered glass windshield and side windows.
The T-TOP SERIES' clean design and durable construction make it the choice of numerous industrial fleets-including the National Oceanic Atmospheric Administration (NOAA), U.S. Navy and more.
|
|
|
|
8.23 m
27' 0"
|
|
|
|
Ring towage, 4 Cleats, Console of guide centers completes them of steering wheel with timoneria monocable, complete Drawer drip flap object holder and ripostiglio, Windshield with tientibene in acc. inox, Electric panel, Fanali prescribed, 2 Rings towing, Covers of the lockers in VTR.
|
|
|
|
8.40 m
27' 7"
|
|
|
This version of our popular 840-series has a centred cabin that allows walkaround, with its large loading surface in front of the cabin for fast, safe, and dry transports to and from the archipelago. A robust exterior and an interior in a class of its own.
Anytec 840 CC is suitable both for leisure and professional use, for those wanting a solution that gives so-called walkaround. The V-shaped hull gives perfect sea capabilities.
|
|
|
|
8.55 m
28' 1"
|
|
|
LOA: 9,35 m
L,hull: 8,55 m
BOA: 2,70 m
B,hull: 2,56 m
Dry weight: ca. 3 000 kg
Engine: 315 %u2013 840 Hk
Fueltank: ca. 400 L
Speed: 40 knop
|
|
|
|
8.84 m
29' 0"
|
|
|
|
Built from our Powered Barge platform, the LINE HAULER SERIES was designed specifically for ship dockingoperations. Its modified “V” hull design, low profile, flat deck and recessed cockpit allow the operator to travel to the worksite quickly, maneuver in low clearance areas and transport heavy loads effectively. The Line Hauler is an excellent example of the innovative approach the Workskiff Team takes to meeting our client’s specific needs.
|
|
|
|
9.14 m
30' 0"
|
|
|
With its large flat deck and modified V hull design, our POWERED BARGE is engineered to balance heavy load operations with speed and maneuverability.
Typically outfitted with a console, T-top or cabin it can be adapted to meet a variety of marine transportation needs. Just add a recessed cockpit for low clearance hauling operations or drop the deck down to create a high volume transporter vessel.
|
|
|
|
9.60 m
31' 6"
|
|
|
The latest creation in the Anytec family, the V-shaped hull in combination with a modern superstructure and a RIB, makes Anytec 960 CAB an innovator in aluminium boats. The boat for fast and safe transports in tough conditions - all year. Twin engines give complete control of operation and function. A boat for those wanting professional leisure.
Anytec 960 CAB is a further development of the 950. By using two engines with gears, space is freed behind the cabin. The space can be used for a toilet facility or other use. The front panes are straight and have negative angle, which means less glare and splash. We have given the boat a modern shape by rounding the cabin and superstructure at the front.
|
|
|
|
9.90 m
32' 6"
|
|
|
Rapid reaction outside harbour areas...
Cataglop XL has been especially designed to collect up macro-waste and floating hydrocarbons in coastal areas up to 6 nautical miles from the shore, near beaches, rocky areas, cliffs, ...
It has a cruising speed of 6,5 knots.
It collects floating waste, even in difficult to get at areas :
- Solid floating waste (wood, plastics, polystyrene, algae...) are collected in a pivoting basket which is automatically emptied into an on board container
- Liquid floating waste (oils and hydrocarbons) are stored floating in a separator tank, without any emulsion, and transfered to earth with a motorized pump
Strong points
- Its cruising speed allows a daily work on several areas (harbours, beaches, cliffs...)
- Its storage capacity can be increased thanks to a towed flexible reservoir
- Equiped with removable flexible booms wich increase its operating width
- Fire fighting
- Built in 5083 aluminium
|
|
|
|
11.00 m
36' 1"
|
|
|
|
|
|
12.30 m
40' 4"
|
|
|
Anytec 1230 CAB - when design, construction and function are at their best. This boat is equipped with twin diesel engines and water jets, resulting in next to limitless possibilities for manoeuvring and travel in shallow waters.
Two big bunks, restroom, shower, and galley with a generous pilot house provide a comfortable life on-board. Anytec 1230 is primarily for leisure use that is a cut above the norm. Nominated for Boat of the Show 2002.
Flybridge for lazy "cruising days" (can also be supplied without flybridge). Bench seat that turns into another bunk. Table that can be raised and lowered. Well-planned pilot house. Plenty of stowage space. After-body that becomes a great outdoor patio in the evening sun.
For the interior we can choose woods such as birch or mahogany with matching textile
Several options such as teak deck, stainless piping, etc. may be ordered above and beyond standard. Fendering is a foam-core protected by rugged UV-resistant fabric
|
|
|
|
15.00 m
49' 3"
|
|
|
|
Barge multiservices out of aluminum uses for the maintenance of the maritime ways naviguables or fluviales.15 m X 4 m, 25 m X 6 m....
|
|
|
|
18.00 m
59' 1"
|
|
|
Offshore Oil Spill Recovery Vessel
Offshore oil spill recovery vessel for use with major oil slicks and discharges. Catamar can work efficiently up to force 5 and with a clean up rate of 100 m3/hr continuously.
A turbine creates the flow, sucking in the hydrocarbons.
This flow between the twin hulls of Catamar is towards a tank equipped with a mesh to hold back solid waste.
Storage
For a pollution lower than 50m3 or a degasification, the own storage capacity of CATAMAR is sufficient.
In case of major pollution, recovered hydrocarbons are progressively transferred from the Jumbo25 into a bunker barge sailing behind the Jumbo25 (bunker barge storage capacity: 1000 to 8000 m3 maximum).
200 m3 bladders equipped with an integrated screw pump can be stored on the deck increasing Jumbo's own storage capacity while waiting for the bunker barge to arrive.
Performances
Considering the weather conditions in the working area, CATAMAR performs as follows:
- Beaufort force 3 included : 70000 m 2 cleaned / hour with her arms covering a 10 m width
- From and above Beaufort force 4: 20000 m 2 cleaned / hour on a 3 meter band with
|
|
|
|
18.00 m
59' 1"
|
|
|
FINTRY CarboCAT Multi-Purpose-Vessel
The FINTRY CarboCAT Multi Purpose Vessel (MPV) was developed as a future-oriented ship concept for many different uses at sea. It combines the advantages of innovative carbon fibre composite technology with those of the tried-and-tested catamaran philosophy.
The FINTRY CarboCat offer various advantages over mono-hull such as, for instance lower displacement resistance, higher initial stability and superb seaworthiness. Aparticular feature of FINTRY CarboCATs, however, is the composite structure made of carbon fibres that has been successfully used in commercial shipbuilding for some years.
Thanks to this technology, coupled with the high-quality materials, FINTRY CarboCAT Multi Purpose Vessel sets new quality standards with regard to efficiency and longevity.
The uses of FINTRY CarboCAT MPVs are diverse:
• Pilot | Patrol
• Offshore Wind Farm Support
• Diving | Survey
• Cargo Ferries
• Aquaculture | Fishing
• Pollution Control
• Fire & Rescue Assistance
FINTRY CarboCAT MPVs 18 m | 20 m | 23 m | 38 m (in development)
The copyright for all development of FINTRY catamarans is owned by FINTRY Marine Design AG.
|
|
|
|
19.25 m
63' 2"
|
|
|
|
|
|
50.00 m
164' 1"
|
|
|
|
| ... products without information |
| |
|
|
5.19 m
17' 0"
|
|
|
|
|
|
5.60 m
18' 4"
|
|
|
|
|
|
