|
|
The Perfect Anchor Storage Solution!
Now you can easily store the spare & storm anchors you need!
Custom designed for all Fortress™ & Guardian™ anchors
Made from top quality, rugged ballistic Cordura™
Securely holds everything: Anchor, 6’ (2 m) chain, shackles and wrenches
Includes spare clips & wrenches
The experts agree: Having storm anchors aboard can make the difference between safety and disaster. The Fortress Stowaway Anchor Bag holds everything you need to deploy your Fortress or Guardian anchor quickly. No more searching for wrenches, shackles or chain. With the Stowaway system, it’s “in the bag”!
The Stowaway bags are built to last in the rugged marine environment. The bag closure as well as the straps (which serve as convenient carrying handles) are high strength, extra wide Velcro™. Inside each bag are pouches to hold the correct size wrenches (included) and even a spare fluke clip, bolt and nut (also included). Easy to understand diagrams are sewn into the bag to take you through anchor assembly and bag-packing procedures.
|
|
CALIPSO
This is the new INMARE design of a protection system for anchor windlasses.
It avoids any anchor traction loads on the windlass.
It provides protection for the anchorage.
Refined with a hand-made splice, it is equipped with a 14 mm polyester line, an outstanding shock absorber and a hook that can be installed on 6-12 mm chains.
|
|
| ... products without information |
| |
| Our SEAVIEW Satdome Power Mounts are constructed the same as our other Power Mounts and also have a 20° Aft leaning profile. A stylish airfoil extrusion is used on all of our Power Mounts. |
|
| Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. |
|
Our Open Array Power Mounts are constructed the same as our Power Mounts with high quality marine grade aluminum and finish with a brilliant white powder coated finish. All Open Array Power Mounts have an 8" x 8" square base and a 20° Aft leaning profile. Our newest Open Array Mount includes a heavy duty bolt on light bar which accepts all of our Power Mount Accessories
|
|
Similar to our Power Mounts Plus, these mounts are constructed of high quality marine grade aluminum and treated with an anodized primer then finished with brilliant white powder coated finish. Our Standard Power Mounts have a 7" square base, with a 20° aft or 20° forward leaning profile. Each unit has a waterproof radar cable gland positioned aft and below the top plate. Unlike our Power Mount Plus these Standard Mounts are not Light/GPS Bar capable. *Universal Fits: Furuno, Koden, JRC, Northstar & Lowrance 15-18" radar domes.
|
|
The adjustable radar arches accommodate 14” - 18” satdomes and bridge over any closed radome or 4’ open array radar. These arches are constructed of high quality Marine Grade Aluminum, treated with a three stage primer and finished with a brilliant white powder coat.
Optional DM-light bars shown in accessories. |
|
Based on our unique ellipse extrusion, Scanstrut's Aluminium PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Available in a forward leaning profile for radome installations and an aft leaning profile for open-array installations.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts |
|
| Constructed from high grade carbon fiber this aft leaning tapered mast offers an universal radar mounting plate to fit all 2kW and 4kW radars. The PMA-100C is equiped with spreaders that can receive GPS or other accessory. The top plate is drilled and tapped to accept Aqua Signal 40/41 light, the base plate measure 10'x10' and the mast height is 30'. This elegant light weight mast not only offers a stylish addition but a lasting investment to any yachts. |
|
Offering a single "monocoque" structure for outstanding strength and surface finish, Scanstrut's Composite PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.
NEW design for 350mm version - even greater strength to suit all new generation radomes.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts |
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas |
|
Self Levelling Radar Mount - Mast
Our Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.
Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations.
Features
- Hydraulic damping to eliminate minor oscillations
- Sealed system - entirely maintenance free
- Passive system - no power required
- Reduced weight aloft - complete system weighs only 3.4 kg
- Easy upgrade from fixed mast mount - same mounting footprint as SC20 & M92722
- Attached to mast by four swivel ffet - matches the profile of any mast
- 12 point fixing - highest quality monel rivets
- Compact mount - radar extends only minimum distance from front of mast |
|
Scanstrut's Stainless PowerTower® is designed to elevate your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Created using a highly polished stainless steel, this makes a great looking installation on any boat.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts |
|
| Hall Spars & Rigging's carbon-fiber radar bracket features a unique dampening system. The system is adjusted to eliminate the "swing" when tacking, allowing the radar to move quietly and under control to the new tack. It also eliminates the pendulum effect when the boat is at anchor. It's very light weight and a stylish addition to your mast. |
|
| Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5. |
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. Please fill out the form below to start the process.
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck |
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck |
|
| Universal light/GPS bar for all Power Mounts ending in "L" and pole tops. LTB is easily attached to the Power Mount using unique Q-lock system. (must order LTB separately).This one of numerous accessories available for Power mount and Power mount PLUS |
|
|
|
see the results for the following category
