|
|
|
The all new carbon fibre full face watersports helmet is designed for waterski jumping or jetskiing. It is available in small,medium,large and a range of colours. The Viper helmet only ways 600gs and has a water proof linning for ease of use. This great new light weight full face helmet is used by the current 2005 European jump champion and 2005 world jump bronze medalist, Jason Seels (as photo), he should know what works well with a personal best in the jump event of 70.9m (230ft).
|
|
|
ADJUSTABLE HELMET with protect ears, approved EC, in-depth adjustable interior cap and mast head (54 - 62 cm), adjustable jugular strap, frontal protection not absorbing, weight: 420 gr., orange, blue or yellow colors.
|
|
CE Approved to white water grade 4, the Kontour Plus is the latest headgear from Yak and is sure to make an impact (and protect against one), with style and safety conscious paddlers this year.
Each Kontour helmet is constructed using high density ABS, for the outer shell and for comfort and extra protection, are lined with impact resistant high density EPS foam.
|
|
- High Absorption Closed Cell Foam Inside
- Lightweight Outer Shell
- Designed for Watersports Only
- Internal Adjustment Strap
- Quick Release Chin Closure
- CE Approved -Black Color
|
|
| ... products without information |
| |
Due to the massive influx of low cost/low quality stainless propellers imported from (well, you know where), we have developed a line of propellers (R & X-Series) that are price-point competitive WITHOUT sacrificing the PowerTech quality or steel strength.
- The R-Series blade style is similar to the Rapture/Ballistic/Stiletto, best all purpose propeller with high rake and hard wall “L” cup, available for Class D & E Motors. It has a constant 13.25 or 14.25 inch diameter (regardless of pitch), available in 13 - 23 inches of pitch, right & left hand rotation, with a square hub cavity to receive the Vortex/Flo-Torq style hub kits. ** Suggested Retail (USD): $342.00 (Class D) and $364.00 (Class E) **
- The X-Series has been developed as an alternative to the Apollo and other less expensive imported propellers. Available for Class D & E Motors, 15 - 21 inches of pitch, right hand rotation with a square hub cavity to receive the Vortex/Flo-Torq style hub kits.
** Suggested Retail (USD): $284.00 (Class D) and $304.00 (Class E) **
E-Mail: Sales@ptprop.com -- Dealers Welcome
|
|
|
This durable, colorful, 54" round tube has been designed specifically for the smaller rider. The high side walls provide plenty of buoyancy so the tube glides across the water, even when towed at lower speeds. The seat hole has been reduced in size to keep the smaller rider from ‘bottoming out.’ Bright, colorful graphics round out this entry into Connelly’s tube line up. The smaller padded handles are easy for little hands to grip. The Spin Cycle is great for one seated or prone rider.
|
|
Connelly Mega Wing
Gigantic 8' wide tube easily accommodates two or three riders. At the end of the day of hard tubing, flip it over and use it for a raft or lounge!
Features: Molded handles, inflatable seating area and head rests, 840 D coated Nylon, 30 Ga PVC bladder, Boston valve and Delrin Quick Connect, covered mesh bottom drains. Free Quick Fill adapter included.
|
|
THE hot new curved ski tube
For one or two riders! Neoprene padded riding surface. Eight (8) positional grab handles. Super strong 'tripod' style tow harness with quick link rope connector. Fun on the water... you can't get enough of it !
|
|
New! The Skull (91” x 69”) Street Price $269.99: 3 + 1 Seating. We started with our popular Mega Wing 3 rider tube, and then rearranged everything until we came out with a new way to seat 3 or more riders. The pointed front end allows the Skull to get up on plane easier and the rumble seat at the back of the tube makes it easy to climb back on. In addition, this inflatable section can be used by a 4th rider (if they dare)! Cool graphics are a real attention getter.
Features: Fully padded handles with knuckle guards, Boston Valve with padded cover, Inflatable seating, 840 D Nylon Cover with 30 ga. PVC Bladder, webbing, boarding straps, covered mesh bottom drains.
Main Selling Points:
- Good rider separation
- Pointed front end for quicker starts
- Inflatable seating is built into the floor (not separate assembly)
- Padded handles
- Fun graphics
- Comes pre-assembled
- Size: 91” wide x 69” long
Half height platform attached to back serves two purposes: Boarding platform and flat deck for 4th rider. Just like our other large, covered tubes, the Connelly Skull comes fully assembled inside the color box: Just add air and you are on the water in a flash. One Year Warrantee. Available now.
|
|
New! The Skull (91” x 69”):
3 + 1 Seating. We started with the Mega Wing and then rearranged everything until we came out with a new way to seat 3 or more riders. Pointed front end allows the Skull to get up on plane easier. Rumble seat at the back of the tube makes it easy to climb back on. Cool graphics are a real attention getter.
Features: Fully padded handles with knuckle guards, Boston Valve with padded cover, Inflatable seating, 840 D Nylon Cover with 30 ga. PVC Bladder, webbing, boarding straps, covered mesh bottom drains.
|
|
SKI BISCUIT - U370/ST2000-8 (Original 54" Tube)
Our 840 denier nylon covered Ski Tube, with special drain and 4 EVA handles. The all nylon towing harness allows for better pull and stress distribution. Basically unchanged since 1982. Note: Supplied with a repair kit and owner's manual. Warning and instructions printed on product. Quick Release is recommended.
|
|
|
Fun performance shape easy for beginners, surfs excellent, light weight 15 lb. , Holds up to 230 lb., Includes: seat pad, 1 center fin, foot straps, hardware. Usually an in stock item, check for various seat to feet lengths
|
|
Fun performance shape easy for beginners, surfs excellent, light weight 15 lb. , Holds up to 230 lb., Deep seat pan for extra stability. Includes: seat pad, 1 center fin, foot straps, hardware. Usually an in stock item, check for various seat to feet lengths.
|
|
The SWS Classic Series Fullsuits and Shorties are versatile and represent uncompromising value. Both suit models have been designed for a wide range of use, including wakeboarding, waterskiing and kayaking in mild to warm conditions.
Details and Features:
– 2mm Mesh Skin chest and back
– 2mm Nylon2 Legs and arms
– Contoured underarm panels for comfort and flexibility
– Heavy duty, non corrosive YKK zipper with double needle installation
– Zip lanyard for easy entry/exit
– Interior rear zipper reinforcement prevents tear out
– 6 thread flat locked seams for strength and comfort
– 2mm Comfort collar with adjustable hook and loop closure
– Lifetime warranty
|
|
The SWS Classic Series Fullsuits and Shorties are versatile and represent uncompromising value. Both suit models have been designed for a wide range of use, including wakeboarding, waterskiing and kayaking in mild to warm conditions.
Details and Features:
– 3mm Mesh Skin chest and back
– Pre-bent, 2mm arms and legs increase mobility
– Contoured underarm panels for comfort and flexibility
– Sculptured, computer generated patterns for consistent fit from suit to suit
– 2mm Comfort collar with adjustable hook and loop closure
– 6 thread flat locked seams for strength and comfort; prevents chafing
– Full length YKK back zip with lanyard for easy entry/exit
– Interior rear zipper re-inforcement
– Lifetime warrenty
|
|
|
The twin tip shape is designed for speed, lift and stability. Perfect for cutting, jumping and riding forward or backwards. The thick, soft strap and contoured pad provides the extra cushion needed for big tricks. Raise or lower the retractable fins while riding to dial in your grip from the adjustment knob between your knees. Advanced riders will appreciate the width for big pop off the wake.
|
|
... see all the products in the category
Kneeboards
|
|
The SWS Sahara Drysuits are the warmest suits in the SWS product line. Designed to extend your season, the Sahara drysuits are constructed of 3mm Nylon II neoprene and are glued, blind stitched and heat taped to make the seams as water tight as possible. The lower body is snug to reduce drag in the water, while the loose fitting upper body is designed for greater mobility. The ankle and sleeve cuffs are extra long and made of embossed skin neoprene on the outside so they can be rolled under to further prevent water infiltration (flushing).
|
|
|
... see all the products in the category
Drysuits
|
| ... products without information |
| |
|
... see all the products in the category
Paddles
|
| ... products without information |
| |
|
|
