|
|
Low cost - not low quality LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LEDs, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLEDs 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
Transoms
Engine Brackets
Under the gunnels
Trim tabs
T-Tops
Boat trailers for night launching.
ROVs
Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED
|
|
Docks, pilings, marinas, waterside restaurants and houses can now experience the underwater lighting phenomenon with our DV24 dock light. The light has a PVC housing with a 100 watt halogen lamp and is available in 12 volt a.c./d.c. The reflector is a 45 degree wide angle for maximum light output. The dock light is fastened to a flat surface by way of two mounting brackets. The light is fully submersible and IP68 rated.
|
|
The triple LED dock light (Ref. S40351) uses three 3 watt LEDs. The light is IP 68.
If this light is to be used underwater, the driver required is S41105 for each individual light.
If this light is to be used above water, the driver required is S41104 for every 2 lights.
|
|
These solar lights are mounted on top of a sturdy steel base, housed inside an attractive,Colonial style 12" tall, 4" wide vinyl pillar. Easy to install and NO WIRES. These decorative and functional dock accessories will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes.
Each kit includes, pillar, stainless steel cleat, mounting base, solar light and rechargeable batteries.
|
|
HEAD BLINKER
The head blinker is installed at the pier head to signal its presence.
The lamp, RINA homologation, is placed at 2,5 m elevation from the deck, on the top of a hot dip galvanised steel support, aesthetically pleasant and well integrated in the overall plant. Electronic flickering and dusk switch can be provided upon request.
|
|
MPL/MPM - Pontoon Light & Pontoon Marker
Pontoon illumination and identification can be provided by means of this bollard. The units incorporate a 6A MCB and P12R photocell controlling 2D16 lamp control gear located within a 3mm opal polycarbonate diffuser.
|
|
Liteway Lighting Post
Install lighting around your marina with this low cost post and illuminated globe. This unit is available in both 304 and 316 Grades of Stainless Steel. The diameter of the post is 60mm and heights of either 1000mm or 1500mm are available. A 12W low consumption lamp is supplied and the post is designed to be root mounted but base flange versions are available upon request. As an even lower cost alternative, a fibreglass root mounted post can be supplied.
|
|
|
From the standard 360 degree low glare option to the modern looking quad head, we are confident we have a light for every occasion. Our solar powered marker lights are ideal for marking out hazardous edges and areas along quaysides, access bridges, pontoons, mooring fingers, footpaths, road ramps, etc. Illuminated pier identification bollards and access bridge lights are included in our extensive range of lighting products.
|
|
During the day the solar panel collects the sun's energy and charges the batteries. At nightfall, Solar Dock Lite's sensor automatically turns on the super bright LED. With multiple units your dock will provide an elegantly lit pathway for all to walk on. This unit is hands free and energy efficient! Lasts 18 hours on a full charge and is brighter than conventional solar garden lights! Just place it on your dock post and you are ready to go!
Your dock was an expensive investment and we encourage you to protect it from unwanted boating collisions. Lining your dock with Dock Lites isn't just for looks. It adds safety as well. Ask your insurance company about discounts on your umbrella insurance for protecting your dock with Dock Lites!
|
|
The Mariner is a lighted bollard that can stand from 11 inches to 96 inches tall and can be used in various applications from marina docks, to landscaped areas, around pools, golf courses, parking lots and beyond. The housing is made of engineered resin to withstand the harsh marine and land environments form Alaska to the tropics. The mariner became available in May 2007 and comes with a lifetime warranty.
Product Specifications:
Can be configured with a 5 Watt, 7 Watt or 13 Watt Fluorescent Bulb
Can be mounted to a 4 inch. PVC Pipe to get the desired height
We can supply the mounting base and painted pole for any desired height
Lifetime Warranty on the engineered resin housing
Patent Pending
UL Listing Pending
|
|
| ... products without information |
| |
SPADE anchors are manufactured in 3 materials (Steel, Aluminium, Stainless Steel), and in 6 sizes.
Plough shaped anchors are designed to plough sea floors. SPADE anchors by name, and by action, dig deeply into the sea floor. Once they are within the sea floor, the concave shape of SPADE anchors compact the sea floor, and thus not to move! This design is unique.
The remarkable efficiency of a SPADE anchor is due to the size, and shape, of its effective surface : SPADE anchors of the same surface area will have the same holding power, no matter the material they are made of. All models meet the seven safety criteria :
1. The anchor digs in rapidly, regardless of the type of sea bottom.
2. The anchor buries itself deeply within the bottom.
3. Once set, the anchor gives the maximum holding power without dragging.
4. If the traction force exceeds the bottom holding characteristics, the anchor offers constant, and maximum, resistance to dragging - even if it moves under extreme load.
5. The anchor keeps on holding, regardless of the shift in direction of either the wind or the current.
6. The anchor design doesn't allow the anchor rode to become snagged by the anchor.
7. The anchor is built strongly enough to withstand very high loads.
|
|
Today it is proven that the high behavior of the anchors of navy to strong penetration raises more geometry than of the weight.
Three times lighter than a traditional anchor, the anchor FOB LIGHT facilitate the operations of traditional mooring or empennelage.
FOB the LIGHT is made out of alloy of aluminum, magnesium and titanium, and is treated thermically to have the mechanical resistance of steel.
Ideal for:
. 2nd mooring, associated with a leaded rope
. A frequent use and without tiredness for all the family
|
|
... see all the products in the category
Anchors
|
We stock video illuminations of different manufacturers. The accumulator tanks of the lights simply can be put together with corresponding mounts on the underside of the housings. Like this it is also possible to mount available lights at the housings.
The head lights of video illumination are mounted with ball-and-socket joint arms directly on the grips of the video housing. The light direction can freely be chosen and shade in the picture can be avoided.
Please gather the technical data of the different video illuminations from the following tables. All lamp systems contain the ball-and-socket joint arms as well as the assembly mount.
|
|
With 20 Watt Super Bright Halogen Bulb and specially designed reflector, bright uniform wide beam without waves or hotspots. Excellent for digital camera and video applications.
Compared to conventional reflectors where some of the bulbfs light is lost, requiring more power output to make up for the loss, the FIX Light HD20DX has an originally developed aluminum reflector which minimizes light loss for brighter performance. Also, because less power is consumed, batteries last longer. The special bulb has a dome shaped front which projects a uniform smooth light.
|
|
The completely waterproof camera can be installed in any of the underwater light housings for steel, aluminum or fiberglass hulls. The camera is placed in the housing and fixed with a mounting kit. It has exterior focus and zoom rings from 0.16" to 0.31"/ 4.0mm to 8.0mm, it offers broadcast quality pictures are 470 color lines of resolution and is 110 A/C or 12 VDC. The underwater images can be fed to any number of monitors or plasma screens through out the boat. The camera comes with a three year warranty and all maintenance, like the underwater lights is from within the hull. This underwater camera is perfect for viewing the aquatic life, as well as offering safety and security benefits.
|
|
Mimic panel X for navigation lights and bilge pump control for motor yacht.
|
|
|
Huge buoys for open sea. They signal port entrances, isolated dangers in open sea, wide channels and offshore oil fields. The big floats garantee the mooring of big chains at high depth and at the same time the capability to host a high focal plane (from 3 to 6 meters). The lantern, solar powered, can reach long distances: at least 5 Nautical Miles.
|
|
Jim Buoy's all new Sombrero Buoy is designed to be used where maximum stability and buoy strength are of prime importance. With the addition of the 2" wide aluminum protection band (optional) on the top edge of the jumbo flotation base, the Sombrero Buoy can withstand jet-skis and boat crashes that might otherwise permanently damage or tip over a standard buoy.
In addition to positive, upright floatation, the large 12" high x 30" diameter base provides greater visibility because it naturally floats higher in the water! A galvanized external ballast may be ordered for some models - other ballast are internal, however (some weights may be necessary to add to the chains if a shallow condition exists).
All colors are impregnated and molded into the tough CJ-37 Rock Hard outer shell for years of rugged maintenance free service. Eye bolts and metal components are galvanized steel for greater strength and resistance to rust and corrosion.
|
|
The structural characteristics of the beacon were expressly projected with the aim of reducing current and wind drag to a minimum. The big float and exclusive Resinex anchoring system, which has the characteristic of being elastic but fixed, allows the pilon very little freedom of movement in a horizontal direction yet guaranteeing elasticity (and so automatic repositioning) in the event of collision.
For this reason the Resinex elastic beacon assures correct positioning, reliability and a signalling security impossible to match with the traditional buoys. In addition, in the case of need, it can be easily removed and repositioned. It is particularly suitable for the precision marking of navigable canals or of the presence of underwater pipelines and cables or any other obstacles which could be found below water level.
|
|
|
Carmanah's M700 series offers exceptional performance and value in a compact IP68 waterproof, user-friendly design, with optional GPS capabilities. These lights feature 3 to 5 nautical mile visibility and replaceable battery packs to extend the light life well beyond 5 years.Since 1996, the M700 series has been regarded as the light of choice by coast guards, navies and port authorities around the world.
|
|
The M502 is a fully integrated solar-powered LED one nautical mile (1.8km) marine hazard-marking light. It installs in minutes and requires no maintenance or servicing for up to five years.
Utilizing an innovative combination of solar power and LED (light emitting diode) technology, the M502 LED light charges during the day, even under cloudy conditions, and turns on automatically at night. Available in green, red, amber, white and blue light output with one of five standard flash patterns (10, 15, 30, 60 flashes/min & steady-on).
|
|
| ... products without information |
| |
|
