|
|
Made from high tenacity co-polymer yarns and available in 3,4 or 8 strand.
A competitive alternative to Nylon and Staple Polypropylene.
Specific gravity of 0.91
BENEFITS & FEATURES
- Excellent abrasion resistance.
- Excellent strength.
- Flotation - Permanent flotation in water.
- Flexible & easy to handle.
- Fully UV stabilised with medium elongation in use.
- Protected spliced eyes at each end.
- Tiemendous range of uses.
- Characteristic hi-vis yellow colour with two black maner yams.
- Wet strength equal to dry strength
APPLICATIONS
- Ideal for a variety of marine applications.
- Ideal in fishing applications as a general, multi-purpose hard working rope.
- Mooring.
- Towing.
- Securing.
- Lifting.
- Messenger Lines.
|
|
Our popular dock slide utilizes rugged, durable, polyvinly-coated steps, and a one-piece polyethylene bedway, for a smooth ride. Install with almost any EZ Dock where water depth is more than 5 feet.
|
|
TallyCard is a robust payment system based on wireless transponder cards without vulnerable contacts or magnetic stripes.
The TallyCard system is very simple to use - there are no buttons or complicated operation and the amount in the card is always
shown in the card reader's display. The guest can accurately check his or her consumption, and will therefore not receive any
unpleasant surprises.
The TallyCard is an obvious supplement to our TallyKey supply pedestals, but it can also be used for e.g. payment for bathing and washing and for access control (e.g. as an electronic door key for hotel rooms, cabins or holiday cottages).
A user-friendly program is used to add the amount to be spent together with information on access on to the card, easily and quickly. All changes of times and prices are also made with the program.
The TallyCard system is decentralised - no sensitive data cables have to be ducted to the card readers!
|
|
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED
|
|
for prepayment, the user's credit is entered on the transponder, which authorizes use of and
payment for electricity and water from the SMART module
|
|
Docks, pilings, marinas, waterside restaurants and houses can now experience the underwater lighting phenomenon with our DV24 dock light. The light has a PVC housing with a 100 watt halogen lamp and is available in 12 volt a.c./d.c. The reflector is a 45 degree wide angle for maximum light output. The dock light is fastened to a flat surface by way of two mounting brackets. The light is fully submersible and IP68 rated.
|
|
The triple LED dock light (Ref. S40351) uses three 3 watt LED’s. The light is IP 68.
If this light is to be used underwater, the driver required is S41105 for each individual light.
If this light is to be used above water, the driver required is S41104 for every 2 lights.
|
|
These solar lights are mounted on top of a sturdy steel base, housed inside an attractive,Colonial style 12" tall, 4" wide vinyl pillar. Easy to install and NO WIRES. These decorative and functional dock accessories will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes.
Each kit includes, pillar, stainless steel cleat, mounting base, solar light and rechargeable batteries.
|
|
|
Deadweight insert and cable winch added to our polyethylene pipe bracket allows easy dock adjustment for water fluctuations. Cable sold separately.
|
|
The ultimate solution. Useful in all environments indoors and out. Manufactured from a fast-drying resilient PVC compound specially formulated for mould and meldew prevention. Low profile AQUAMAT TILES provide a fast draining, sure-grip surface. Protects boat decks, storage lockers, floors and vehicles from damage caused by impact with hard or heavy impacts. Ideal as a fatigue relief in work areas. Perfect around swimming pools and marinas where slippery surfaces may be a liability. 6 Tiles Per Pack.
|
|
|
Two-piece chaseway attaches to side of dock sections, allowing conduit for utilities. Available in 60" or 20" wide sections, and with stainless-steel hardware option.
|
|
These fish tables are constructed with high quality materials. The cleaning surface is made with 1/2" or 3/4" King Starboard High Density Polyethylene (HDPE), an FDA approved cleaning surface. There are no cracks or crevices for bacteria to build up in. The framework is made of T6061 marine grade aluminum and TIG welded for strength and a clean finish. All fasteners are 316 grade stainless steel.
The 2-Leg table projects out from the dock and mounts to the dock's substructure, taking up no dock space. Each leg comes with its own mounting bracket (vertical) and flange (horizontal), offering good stability.
Options include powder coating, knife rack, water bib and hose holder, enclosed base, and sink and faucet. Available surface sizes are 18" x 38" and 24" x 48" to 120" (in 24" increments).
|
|
HEAD BLINKER
The head blinker is installed at the pier head to signal its presence.
The lamp, RINA homologation, is placed at 2,5 m elevation from the deck, on the top of a hot dip galvanised steel support, aesthetically pleasant and well integrated in the overall plant. Electronic flickering and dusk switch can be provided upon request.
|
|
MPL/MPM - Pontoon Light & Pontoon Marker
Pontoon illumination and identification can be provided by means of this bollard. The units incorporate a 6A MCB and P12R photocell controlling 2D16 lamp control gear located within a 3mm opal polycarbonate diffuser.
|
|
Liteway Lighting Post
Install lighting around your marina with this low cost post and illuminated globe. This unit is available in both 304 and 316 Grades of Stainless Steel. The diameter of the post is 60mm and heights of either 1000mm or 1500mm are available. A 12W low consumption lamp is supplied and the post is designed to be root mounted but base flange versions are available upon request. As an even lower cost alternative, a fibreglass root mounted post can be supplied.
|
|
|
From the standard 360 degree low glare option to the modern looking quad head, we are confident we have a light for every occasion. Our solar powered marker lights are ideal for marking out hazardous edges and areas along quaysides, access bridges, pontoons, mooring fingers, footpaths, road ramps, etc. Illuminated pier identification bollards and access bridge lights are included in our extensive range of lighting products.
|
|
Pontoon is the latest addition to the Tek-Dek family of marine products. It is a modern hi-tech way to solve your land-based decking needs.
Combining the latest innovations in wood composite engineering, Tek-Dek Pontoon is a durable, good looking, lightweight, rot free solution which is equally at home in commercial marinas and private gardens.
Tek-Dek Pontoon is colour stable and will out-last wood three times over. It is also virtually maintenance free and is easy to install thanks to ingenious T shaped clamping spacers, meaning no drilling of the planks is required.
All planks are dual faced, allowing you to choose either a solid wood grain effect or the traditional fluted finish. Matching end caps are available.
Available in Teak or Grey at lengths of 2.29 metres.
|
|
CEE EXTENSION CORD SETS 16A, 250V
Moulded 3 pin (male) CEE plug and moulded (female) CEE connector with LED power indicator and weather proof protection cap. CE Marking
|
|
|
The Marine Cord Set features a MP16-20 moulded boat connector (including LED power indicator and protection cap) and a moulded CEE shore plug to PUR cable. This combination offers the best watertight, rugged and reliable construction on the market.
|
|
Ratio Electric Marine Cord sets with moulded connectors to PUR cable
offer the best watertight, rugged and reliable construction on the market.
ADVANTAGES MOULDED PLUGS:
- reliable crimpcontacts;
- compact and tamperproof construction;
- integrated bend- and strainrelief.
|
|
SIMILTECK STAVES Since 1994 Martini Marinas produces Similteck staves, a special polypropylene resin, using the technology of injection moulding.Beside being a solution against the tropical deforestation, in compliance with the ISO 9004:2000 regulation that recommends the analysis of the impact of the product on the natural resources, the Similteck staves by Martini Marinas offers numerous advantages:
- Absolute absence of splinters - No metallic screws. - Radiating section. The Similteck staves are injection moulded and have a radiating section that dissipates the accumulated heat under the solar radiation, whilst others extruded plastic staves available on the market have full section, and become very hot when exposed to the sun in the summery months. - Non-slip and antimycotic surface - Elastic and silent walking - Maintenance free
|
|
RAIL
Consisting of 2 textile zapes 10 mm diameter, one stainless-steel cable 5 mm diameter, screw and couplings for fixation to the pontoon.
|
|
During the day the solar panel collects the sun's energy and charges the batteries. At nightfall, Solar Dock Lite's sensor automatically turns on the super bright LED. With multiple units your dock will provide an elegantly lit pathway for all to walk on. This unit is hands free and energy efficient! Lasts 18 hours on a full charge and is brighter than conventional solar garden lights! Just place it on your dock post and you are ready to go!
Your dock was an expensive investment and we encourage you to protect it from unwanted boating collisions. Lining your dock with Dock Lites isn't just for looks. It adds safety as well. Ask your insurance company about discounts on your umbrella insurance for protecting your dock with Dock Lites™!
|
|
STEELDECK's patent pending design delivers an ultra strong, environmentally-friendly decking surface with a life expectancy of up to 50 years that requires near zero maintenance under even the toughest fresh and saltwater conditions.
Designed For Durability, Safety And Comfort
At the core of STEELDECK is 14-gauge virgin steel combined with 35% recycled steel. On its surface is a field-proven weather resistant PVC coating that is textured to provide an all-season slip resistant deck.
Additionally, STEELDECK panels are perforated for fast run off of surface water, snow and ice; to dissipate lift pressure from storms and turbulent water action; and provide light penetration from above. And the insulating properties of the PVC coating leave the surface cool to bare feet even in the heat of the Arizona sun.
|
|
|
Aqua-Dek is a finished decking system for fresh or saltwater docks, walkways and decks. It is a lightweight, strong and durable alternative to traditional and heavier decking materials like wood and plastic lumber. Aqua-Dek is designed to be installed over a wood, aluminum or steel framework, and offers advantages for dock builders and dock owners.
|
|
GLOBALGRID molded grating is manufactured by interweaving continuous, thoroughly wetted, fiberglass strand with thermosetting resin systems to form a strong, one-piece molded panel.
Characteristics:
¡¤Corrosion resistant
¡¤High strength & light weight
¡¤Impact resistant
¡¤Fire retardant
¡¤Slip resistant
¡¤Anti-fatigue
¡¤Non-conductive, non-magnetic, non-sparking
¡¤Attractive and maintenance free
¡¤Installation easy
¡¤Long service life
|
|
GLOBALGRID pultruded grating is assembled by pultruded bearing bar("I" beam or "T" beam) and cross bar with a high percentage of fiberglass within the laminate, providing durability, extremely high unidirectional strength and stiffness. The cross bar is mechanically interlocked and epoxy bonded to the bearing bar.
Characteristics:
¡¤Corrosion resistant
¡¤High stiffness & light weight
¡¤Impact resistant
¡¤Fire retardant
¡¤Slip resistant
¡¤Unidirectional strength
¡¤Non-conductive, non-magnetic, non-sparking
¡¤Maintenance free
¡¤Easy to fabricate and install
|
|
|
|
