|
|
Panel mount AutoAnchors. The AA560 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Windlass control and monitoring from the helm.
Large LCD display with adjustable backlighting shows length of anchor rode deployed. Display in feet or metres.
One-touch automatic function deploys and retrieves a preset length of anchor rode.
Vessel is protected during anchor retrieval by preset windlass stopping point and docking alarm.
Safety lock protects windlass from accidental deployment.
Measurements and settings are saved on exit or if the battery fails.
Straightforward installation and set up with pre-programmed calibrations for rope/chain rodes.
Inbuilt diagnostics for troubleshooting installation issues.
Install up to two units or combine with the AA150 or AA601 for multiple stations.
Console available in black or grey.
Cover for weather protection.
|
|
This new AutoAnchor offers all the well known features of the original AutoAnchor chain counters and windlass control systems plus several new innovations, including bow and stern thruster control, deck light control plus anchor wash control.
The AA710 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Full windlass control and chain counting from anywhere on the boat with the hand held wireless remote.
Controls bow and stern thrusters independently and together.
Features a preset stopping point on retrieval.
Easy-to-operate remote has a graphic LCD screen with an intuitive user interface.
Rode count, signal strength, battery level and windlass speed and direction are shown on the backlit display.
|
|
All the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.
- High level wireless transmission security - 2.4GHz ISM band
- Hand held controller displays rode count plus signal strength and battery level
- Ergonomic shape with wrist strap connector
- Water resistant to IP65
- Rubber cover moulding for grip and non slip protection
- Console holder and protective cover
- Shockproof
- IEEE 802.15.4 compliant
|
|
The Control Box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and/or pierce the container, as all the terminals and the panel for the electrical connections are perfectly accessible from the outside.
Outer construction in self-extinguishing polyester resin, resistant to shock and marine corrosion. Degree of protection IP 56 - protection against deckwater.
|
|
This new remote control model LIBERTY has an elegant and functional design. The soft rubber case, which covers sideways the remote control, allows a safe and handy taking under any condition.
LIBERTY is completely waterproof and supplied with waterproof plug and socket (IP68) of the finest quality.
The extending flexible cable (approximately 4 metres) gives the maximum freedom on board during anchoring manoeuvring.
|
|
The experts agree: Having storm anchors aboard can make the difference between safety and disaster. The Fortress Stowaway Anchor Bag holds everything you need to deploy your Fortress or Guardian anchor quickly. No more searching for wrenches, shackles or chain. With the Stowaway system, it's "in the bag"!
The Stowaway bags are built to last in the rugged marine environment. The bag closure as well as the straps (which serve as convenient carrying handles) are high strength, extra wide Velcro™. Inside each bag are pouches to hold the correct size wrenches (included) and even a spare fluke clip, bolt and nut (also included). Easy to understand diagrams are sewn into the bag to take you through anchor assembly and bag-packing procedures.
|
|
Wireless remote control:
With a radio control installed you will have full control of windlass operation where ever you are on board. The control consists of a transmitter and a receiver. With the AutomaticDownTM function the windlass will run automatically for 25 seconds before stopping. To enable the AutomaticDownTM just press the DOWN button on the receiver. To stop the AutomaticDownTM at any time, press DOWN once on the receiver.
|
|
|
To operate your windlass safely in all weather conditions you need top quality switch gear that can stand the roughness of the sea. Anchorlift uses only the best of materials to ensure you a sae and long service life of your equipment.
|
|
| ... products without information |
| |
Panel mount AutoAnchors. The AA560 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Windlass control and monitoring from the helm.
Large LCD display with adjustable backlighting shows length of anchor rode deployed. Display in feet or metres.
One-touch automatic function deploys and retrieves a preset length of anchor rode.
Vessel is protected during anchor retrieval by preset windlass stopping point and docking alarm.
Safety lock protects windlass from accidental deployment.
Measurements and settings are saved on exit or if the battery fails.
Straightforward installation and set up with pre-programmed calibrations for rope/chain rodes.
Inbuilt diagnostics for troubleshooting installation issues.
Install up to two units or combine with the AA150 or AA601 for multiple stations.
Console available in black or grey.
Cover for weather protection.
|
|
This new AutoAnchor offers all the well known features of the original AutoAnchor chain counters and windlass control systems plus several new innovations, including bow and stern thruster control, deck light control plus anchor wash control.
The AA710 is suitable for all windlasses, providing an accurate count for boat owners whether they are using an all-chain or a combination rope/chain rode.
FEATURES
Full windlass control and chain counting from anywhere on the boat with the hand held wireless remote.
Controls bow and stern thrusters independently and together.
Features a preset stopping point on retrieval.
Easy-to-operate remote has a graphic LCD screen with an intuitive user interface.
Rode count, signal strength, battery level and windlass speed and direction are shown on the backlit display.
|
|
All the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.
- High level wireless transmission security - 2.4GHz ISM band
- Hand held controller displays rode count plus signal strength and battery level
- Ergonomic shape with wrist strap connector
- Water resistant to IP65
- Rubber cover moulding for grip and non slip protection
- Console holder and protective cover
- Shockproof
- IEEE 802.15.4 compliant
|
|
The Control Box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and/or pierce the container, as all the terminals and the panel for the electrical connections are perfectly accessible from the outside.
Outer construction in self-extinguishing polyester resin, resistant to shock and marine corrosion. Degree of protection IP 56 - protection against deckwater.
|
|
This new remote control model LIBERTY has an elegant and functional design. The soft rubber case, which covers sideways the remote control, allows a safe and handy taking under any condition.
LIBERTY is completely waterproof and supplied with waterproof plug and socket (IP68) of the finest quality.
The extending flexible cable (approximately 4 metres) gives the maximum freedom on board during anchoring manoeuvring.
|
|
Wireless remote control:
With a radio control installed you will have full control of windlass operation where ever you are on board. The control consists of a transmitter and a receiver. With the AutomaticDownTM function the windlass will run automatically for 25 seconds before stopping. To enable the AutomaticDownTM just press the DOWN button on the receiver. To stop the AutomaticDownTM at any time, press DOWN once on the receiver.
|
|
|
To operate your windlass safely in all weather conditions you need top quality switch gear that can stand the roughness of the sea. Anchorlift uses only the best of materials to ensure you a sae and long service life of your equipment.
|
|
| ... products without information |
| |
|
The new Poly Planar RM-10 Radio Mount is designed to accommodate today%u2019s larger front panel format Marine radios as well as older DIN style and Post mount. Made from heavy wall ABS plastic, the RM-10 has room for all the accessory cables found on the newest radios. Accepts Poly Planar, Sony, Jensen, Marine AV and even Clarion CMD4!
|
|
|
Install virtually any auto or marine stereo on your boat without fear of damage from moisture, corrosion or UV rays. The WC400 is waterproof housing that surrounds your stereo on all sides for maximum protection. A gasket-sealed, polycarbonate splash cover on the front of the rugged ABS enclosure prevents water from entering. The hinged cover lifts easily and remains out of the way in any of several positions. When open, it maintains partial splash protection while still allowing access to stereo controls. Wires and a rear connector let you hook up the stereo and antenna through the housing. A gimbal mounting bracket permits installation above or below the dash, under an electronic box or on any convenient horizontal surface.
|
|
Salt waterproof marine radio housing and covers are designed to prevent the water permeated into the radio or CD player. All products are made in a strict quality control system, which are requested by ISO9001 terms. They have lab certificates to prove their features.
Features & Specifications :
- Radio cover is designed to protect water splashing on the boat and therefore extend radio life
- Compatible with DIN type dual shaft type and removable 12 volt stereo
- U.V. stabilized A.B.S. plastic housing with poly-carbonate door
- Rubber gasket around door provides all weather protection
|
|
Salt waterproof marine radio housing and covers are designed to prevent the water permeated into the radio or CD player. All products are made in a strict quality control system, which are requested by ISO9001 terms. They have lab certificates to prove their features.
Features & Specifications :
- Radio cover is designed to protect water splashing on the boat and therefore extend radio life
- Two applications for DIN type and dual shaft type radio size
- U.V. stabilized A.B.S. plastic housing with poly-carbonate door
|
|
| ... products without information |
| |
Side-Power Round Touchpanel Thruster Control, Chrome Bezel, 12/24V, 5-wire, 2" cutout.
Side-Power has introduced, for 2005, two new round control panels. These single control panels are designed to better complement today's helms and utilize an attractive chrome bezel ring that covers the four mounting screws. They are easy to install with a 2" hole saw and seal with a large o-ring.
|
|
| ... products without information |
| |
|
The sound insulation of our hoods is approx. 10-18 db(A). For better ventilation, our hoods are equipped with additional fans (1~ 230 V). These hoods are available as complete units including vacuum pumps (compressors) or equipped for retrofitting of your existing vacuum pumps (compressors).
|
|
|
|
|
|
|
Westerbeke Sound Guard SST marine generator enclosures enhance your off-shore boating experience by reducing generator noise to a whisper! Sturdy, contemporary looking, and built for tough duty, Sound Guard SST soundproofing enclosures are designed to make you forget you have a marine generator!
Available for already-quiet Westerbeke D-NETTM diesel generators from 5.0 to 33.0 kW and 5.0 to 15.0 kW analog diesel gensets, Sound Guard SST soundproofing enclosures let you enjoy the tranquility of your favorite cove while enjoying whisper-quiet power. Made of the strongest marine-proven materials, easy-to-install Sound Guard SST enclosures are rugged. The unit base, frame, and assembly fasteners are all constructed of highly corrosion-resistant stainless steel for protection in moisture-prone areas. Sound-reducing enclosure panels are formed from sturdy aluminum to reduce weight. Panels are powder-coated for corrosion resistance and designed so that the top panel covers the side panels for additional moisture protection. And while we don't recommend kneeling or standing on the unit, these robust enclosures are rugged enough to withstand limited abuse.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
