|
|
AL-8000 DISPLAY CONTROLLER: Is the master display unit.
Visual & audible alarm for any fault condition.
4 x overrides (engine running overrides for engine alarms).
8 inputs have programmable delays (5 seconds to 10 minutes).
All alarms tone programmable (with tone or without tone or repeating tone).
Alarms are name programmable e.g. (High Bilge) (Engine Room Fire) (Oil Pressure) (Water in Fuel).
|
|
AHD 903-15 is a microprocessor controlled device that is mainly used for decentralized data
registration. Due to the addressable systems it is possible to connect principally any amount of
locally separated data stations (over a bus with 4 wires, incl. power supply) and to query them
via the display AHD 524. Due to a variety of software solutions, e.g. the following problems can
be solved:
- general analog and binary data collection and alarm activation
- exhaust gas average value control for diesel engines
- tank content measurement of arbitrarily shaped tanks
- earthing control e.g. of electric engines
|
|
The Smartswitch BC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight bilge areas. When any bilge area runs for more than one minute an alarm sounds. If the high float detects water the alarm will sound. You can controll the pump by switch the system into manual mode. The system is happy with pumps up to 40 AMPS. Want to know how many times the bilge area pupm was activated? Easy with the BC-8000 from Smartswitch
The system consists of the BC-8000 display controller (as seen above) up to eight BC-100 or BC-100/P controllers and one (optional) RB-800 repeater displays. The system communicates via a 2-wire network cable with a maximum cable length of 1000 meters
|
|
The BILGEWATCH 8 is a Microprocessor based, Panel Mount Instrument that will Monitor and Record the Activity of up to EIGHT Bilge Pumps.
"Four out of five boats that sink, do so at their moorings!..."
Faulty seals, corrosion, cracked or broken fittings and perished hoses are often to blame. Increased bilge pump activity is a sure sign of a developing fault, but automatic bilge pumps can hide the problem, operating while the boat is unattended. By monitoring and recording the activity of all the boats bilge pumps, the BILGEWATCH 8 can provide advance warning of problems, before they become emergencies.
How to order the BilgeWatch 8...
BW8 Kit (£79.95)
Shipping cost will be added, tax is not applicable.
|
|
Mimic panel X for navigation lights and bilge pump control for motor yacht.
|
|
The Smartswitch BC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight bilge areas. When any bilge area runs for more than one minute an alarm sounds. If the high float detects water the alarm will sound. You can controll the pump by switch the system into manual mode. The system is happy with pumps up to 40 AMPS. Want to know how many times the bilge area pupm was activated? Easy with the BC-8000 from Smartswitch
The system consists of the BC-8000 display controller (as seen above) up to eight BC-100 or BC-100/P controllers and one (optional) RB-800 repeater displays. The system communicates via a 2-wire network cable with a maximum cable length of 1000 meters
|
|
The BILGEWATCH 8 is a Microprocessor based, Panel Mount Instrument that will Monitor and Record the Activity of up to EIGHT Bilge Pumps.
"Four out of five boats that sink, do so at their moorings!..."
Faulty seals, corrosion, cracked or broken fittings and perished hoses are often to blame. Increased bilge pump activity is a sure sign of a developing fault, but automatic bilge pumps can hide the problem, operating while the boat is unattended. By monitoring and recording the activity of all the boats bilge pumps, the BILGEWATCH 8 can provide advance warning of problems, before they become emergencies.
How to order the BilgeWatch 8...
BW8 Kit (£79.95)
Shipping cost will be added, tax is not applicable.
|
|
The Smartswitch NavLight monitor (NV-8000)will monitor and control all the Navlights and alarm when there is a fsulty or blown light. Navlights can be put into 6 programmable groups, twilight sensor option, all lights are name programmable,
Also available is the (NV-2000) will monitor up to 32 lights.
|
|
3 heaters in 1 with the new Air Top Evo controller!
Available as an upgrade for all Webasto Air Top Evo heaters. Multi-mode operation for adaptation to your individual heat output requirements: ECO mode for reduced electric consumption, power mode PLUS for +10% more heat output (from 3,500 W to 3,900 W and from 5,000 W to 5,500 W) and ventilation mode to supply fresh, cold air to the interior on hot days.
|
|
|
|
|
|
|
This stand-alone comfort control system provides a central interface
for the complete Webasto climate system. Operation and service of
comfort systems has never been easier.
Product benefits:
- Comfort of all cabins can be controlled centrally
- User-friendly interface with intuitive touch-screen panel
- Easy access to all system information for quick and easy service
- Works with all Webasto BlueCool Premium air conditioning systems
- Integrated diagnosis tool for reduced maintenance time
- Can be fully incorporated into larger boat network systems
Technical Specifications:
- 5,7” TFT colour display
- VGA resolution (640 x 480 pixel)
- Sunlight-readable (350 cd/m²)
- Power Supply 18-30V DC (24V nominal)
- Current Consumption max 1A at 24V DC
- 64 MB internal Flash user memory
- Waterproof front side (IP67) and housing (IP66)
- Cooling: Fanless
- Connection ports:
2 x CAN
Ethernet 10/100 Mbit
RS-232 and RS-422
Digital I/O and Analog Input optional
- Connectors: M12, 8 contacts
- CE and RINA Certification
- NMEA 0183 compliant and ready for NMEA 2000
- Dimensions: 189 x 149 x 91 mm
(width x heights x depth)
- Weight: ca. 1,9 kg
|
|
|
MiniVoyager is a monitoring and control system kit for sail and motor yachts up to 60'. It is composed of a 8.4" touch screen monitor and of a case housing the referred software, which allows the monitoring of the main on board functions at a fingertip. It is extremely easy to install as it doesn't require specialized staff and assistance to start it up. As it is designed according to the most advanced technology, you can actually profit by a fully safe, reliable and unexpensive system. The satellite alarm system Smarty can be integrated into MiniVoyager.
|
|
Heater Craft has the mechanical and electrical expertise to assist you in all phases of wire harness and control panel development. We utilize state of the art metal forming and high speed machining centers to manufacture your panels with precision and speed. Then our experienced assembly team meticulously installs specified electrical components and 100% tests all panels prior to shipping. Our fully integrated harness and panel assemblies often include: dash, engine and bow harnesses along with a fully loaded control panel and matching glove box door.
Contact a Heater Craft sales professional for details.
- Complete design, engineering and assembly solutions.
- Panels can be manufactured in choice of aluminum or plastic substrates.
- All harness wiring completed to U.S. Coast Guard specifications.
- Finishing capabilities include powder coating, graphic design and screening.
|
|
Features:
- Compact Panel size
- Sprayproof inline fuse holders with fuses are included with all compact models
- Waterproof power sockets three way & five way only
- Power socket rated at 16A
- Waterproof to IP56
|
|
| ... products without information |
| |
|
|
|
|
|
Commander Utility Helideck Lights Control System
The TEF 4500 Commander Utility Helideck Lights Control System (HLCS) is a complete control system for all helideck lights. Based upon the Commander Utility technology, this control system allows the control panel to be installed in the bridge or radio equipment room, while the enclosure with all other necessary components may be installed further away. Between the two a simple Cat 3 ++ cable ensures that the industry-proven RS-485 network provides a reliable two-way communication.
The control panel includes 5 buttons that control the perimeter lights, floodlights and windsock lights. In addition the panel includes a main power button for the entire system, an alarm acknowledge button and a button to dim the backlight. Three spare buttons are available, which may be used if additional components are installed in the control enclosure. Customer- specific text on buttons is optional.
Among the unique features of the system is the capability of connecting several control panels to the network, enabling full control and monitoring from several locations. Optionally a gateway may be installed to provide two-way communications to an external control system (NMEA-0183 compliant/proprietary), as well as three additional contactors and circuit breakers to make full use of the 8 control buttons at the control panel .
|
|
Navigation lights control panel for the TEF 2840/TEF 2870 Lanterns.
Main supply 24V AC/DC
Control panel series TEF4720 are designed to switch and fuse navigation and signalling lights on all kind of ships.Panels are approved and certified by DNV.
Panels are offered in three different versions, for 8, 12 and 16 lantern
|
|
Signal Lights Control Panel 230 (115)V system
For Suez, Panama- Rov- and Signal lights
The TEF 4740 control panel serie is constructed operate and monitor suez/signal lights on all kinds of vessels. Number of circuits and mimic is specified by customer.
|
|
The Smartswitch BC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight bilge areas. When any bilge area runs for more than one minute an alarm sounds. If the high float detects water the alarm will sound. You can controll the pump by switch the system into manual mode. The system is happy with pumps up to 40 AMPS. Want to know how many times the bilge area pupm was activated? Easy with the BC-8000 from Smartswitch
The system consists of the BC-8000 display controller (as seen above) up to eight BC-100 or BC-100/P controllers and one (optional) RB-800 repeater displays. The system communicates via a 2-wire network cable with a maximum cable length of 1000 meters
|
|
The BILGEWATCH 8 is a Microprocessor based, Panel Mount Instrument that will Monitor and Record the Activity of up to EIGHT Bilge Pumps.
"Four out of five boats that sink, do so at their moorings!..."
Faulty seals, corrosion, cracked or broken fittings and perished hoses are often to blame. Increased bilge pump activity is a sure sign of a developing fault, but automatic bilge pumps can hide the problem, operating while the boat is unattended. By monitoring and recording the activity of all the boats bilge pumps, the BILGEWATCH 8 can provide advance warning of problems, before they become emergencies.
How to order the BilgeWatch 8...
BW8 Kit (£79.95)
Shipping cost will be added, tax is not applicable.
|
|
|
Specially tailored instrument panels and switchboards are part of modern boat-building. Our high-quality products are manufactured to meet customers specifications and to ensure reliable function in tough marine conditions. They are also exeptionally durable and competitive.
|
|
|
Specially tailored instrument panels and switchboards are part of modern boat-building. Our high-quality products are manufactured to meet customers specifications and to ensure reliable function in tough marine conditions. They are also exeptionally durable and competitive.
|
|
VETUS waterproof engine instrument
panel, with 6 monitoring lights,
buzzer, pre-heating/starter switch
with removable key, combined
revolution/hour counter, temperature
gauge, voltmeter and
oil pressure gauge.
Panel dimensions: 255 mm x 161 mm.
Built-in depth: 121 mm.
|
|
| ... products without information |
| |
The 5000 SERIES Motor Control Panels come in a range of types and sizes to suit the 8000 and 5000 Steering Controllers, and can be supplied for single, twin or multiple motor controls. These Survey approved panels feature include:
- Heavy Duty Motor Starters with variable overloads.
- Phase Alarm.
- Motor Overload Alarm.
- Local control from bridge hand-over switch.
- Local joystick control (optional).
- 24VDC transformer for bridge controls.
- Battery back-up (optional)...
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
