|
|
|
The widespray dispersant system comprises of a diesel/electric/hydraulic driven pump set, a pair of spray arms fitted with special nozzles and a set of hoses for the suction of seawater dispersant and discharge to the spray arms.
|
|
MAVI DENIZ manufacture and supply a number of different sizes of Boat Spray sets are available, ranging from large, permanently mounted equipment for use on tugs to small, portable inshore spray sets for use by small vessels.
MAVI DENIZ supply 2 (two) different types of models for the boats.
MAVISPRAY E Model is ; Fixed permanent type electric installed dispersant spray system for the application of oil dispersant from vessels and Boats.
MAVISPRAY D Model is ; Portable diesel driven dispersant spray system for beach use or operation from Oil recovery Vessels, Tugs, Offshore Supply Vessels or other Craft.
|
|
| ... products without information |
| |
| ... products without information |
| |
|
|
|
|
|
Alfa Laval fuel oil filter
Automatic filters designed specifically for full flow filtering of lubrificating oils for trunk piston and crosshead engines and full-flow filtration of the heavy fuel oils used in modern two-stroke and four-stroke diesel engines.
Fuel oil filter
The F type range of Alfa laval automatic fuel oil filter systems provides effective full-flow filtration of fuel oil (FO), heavy fuel oil (HFO) and marine diesel oils (MDO) up to 700 cSt/50°C. These fuels are widely used in modern two-stroke and four-stroke diesel engines, and the quality and cleanliness of such fuel has an important influence on engine efficiency, fuel consumption, reliability and service life.
This range of automatic fuel oil filter systems only requires very limited investment yet helps ensure reliable engine operation, along with peace of mind for those dependent on the engine working as intended. The robust, space-saving design makes these units easy to install as well as to retrofit as upgrades to existing installations.
These units use fuel oil that has already been filtered to backflush the filters, doing away with any need for a compressed air supply. This backflushed oil is then cleaned by refiltration in a special filter-equipped diversion chamber (which also uses the same backflushing principle) before being recirculated into the system. This diversion chamber acts as an automatic maintenance-free sludge treatment system, collecting and concentrating the particles backflushed from the full-flow chamber and the subsequent cleaning process into a concentrate sludge.
|
|
CJC%u2122 Fine Filters are oil filtration units with integrated circulating pumps for off-line installation. The filters are recognized around the world as highly efficient oil maintenance systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.
CJC%u2122 Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish).
The CJC%u2122 depth filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.
CJC%u2122 Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil.
The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.
|
|
Compact and space saving lube oil filters for full flow filtering lubricating oils in truck piston and crosshead engines.
Alfa Laval automatic lube oil filter systems are designed specifically for full-flow filtering of the lubricating oils used in trunk piston and crosshead engines. This extremely effective filtering prevents contaminants from entering sensitive parts of the engine, thus reducing engine wear and boosting durability. The compact, space-saving design makes them easy to install and to retrofit as upgrades to existing installations.
There are three main types of Alfa Laval lube oil filter, all with an automatic backflushing system. The X type is designed for use with crosshead engines, the T type for use with trunk piston engines and the CCU (Combined Cleaning Unit) type for use with trunk piston engines of up to 5,000 kW in capacity.
|
|
| ... products without information |
| |
The SIRENE is effective at a relative current speed in the range 0.5 knots to 3 knots.
The most common configurations are as follows:
in a river or an estuary
* from one bank to the other
* from one bank with spinnaker boom
* from one bank to anchorage on mooring posts
* on 2 anchorages
close to a fuel wharf
in the high seas
* 1 SIRENE with 2 light boats
* 1 boat with 1 SIRENE and 1 floating tank
* 1 boat with 2 SIRENE with spinnaker boom or paravane
|
|
| ... products without information |
| |
| ... products without information |
| |
... see all the products in the category
Ship RADAR
|
Recommended for Preserving the natural beauty of wood
Main benefits Lower maintenance than varnish Can be re-applied as necessary
Pack size 750ml
|
|
|
Long lasting formula .Contains ultraviolet absorbers to resist weathering .Seals and protects teak and other fine woods .Fast drying - teak can quickly be put back into service .Oil penetrates deep into the wood for extra protection
|
|
TEAK OIL
Teak waterproofing treatment
TEAK OIL is a waterproofing treatment specifically for teak, but can be used with all other types of wood as well. Evenly applied to the surface of clean and dry wood, it does not change the appearance of the treated wood but protects its characteristics and beauty over time. The treatment remains completely invisible and protects the wood from salts, atmospheric conditions such as those found in the marine setting, diesels and other chemical products. It is extremely effective and after just one coat renders the wood completely waterproof.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
