|
|
|
The widespray dispersant system comprises of a diesel/electric/hydraulic driven pump set, a pair of spray arms fitted with special nozzles and a set of hoses for the suction of seawater dispersant and discharge to the spray arms.
|
|
MAVI DENIZ manufacture and supply a number of different sizes of Boat Spray sets are available, ranging from large, permanently mounted equipment for use on tugs to small, portable inshore spray sets for use by small vessels.
MAVI DENIZ supply 2 (two) different types of models for the boats.
MAVISPRAY E Model is ; Fixed permanent type electric installed dispersant spray system for the application of oil dispersant from vessels and Boats.
MAVISPRAY D Model is ; Portable diesel driven dispersant spray system for beach use or operation from Oil recovery Vessels, Tugs, Offshore Supply Vessels or other Craft.
|
|
| ... products without information |
| |
The 600-SOM offers the following features:
- Programmable legends for functions being monitored eg, forward bilge pump, aft bilge pump, engine room lights, salt water pump, locker lights, etc.
- Selectable alarm functions with mute capability, eg.
1. Short beep for indicating an engine room light has been switched on, recurring every 30 minutes if light is left on
2. Continuing alarm for pump operation which can be muted by alarm mute switch
- Visual indication as well as audible alarm on screen to indicate function in operation. If more than one function is alarming this will alternate on flashing screen.
- Provision for external alarm
- Power supply 10-35VDC
- Display is backlit for easy night time viewing
|
|
The Multifunction TL25 is a display that satisfies all your requirements:
Its three screen, with high definition LCD technology, offer excellent readability and a large viewing angle of the data displayed, by day or night. (characters 25 mm high, red backlighting and different levels of intensity available). Its menus are available in 6 languages.
|
|
The SL50 Multifunction
This high quality multifunction screen displays all of the the available data on the Topline Bus with large 50 mm characters.
Using high definition technology LCD , the screen offers an excellent legibility and a wide viewing angle and performance, is the same during the day and the night.
With the multifunction remote control, wired or wireless, the user chooses the information channels to be displayed and also switches between either red or green backlighting.
Configuration is possible in 6 languages : French, English, Italian, Spanish, German and Dutch.
The SL 50 is designed for the boats of more than 45’.
|
|
|
|
|
|
|
PROGRAMMABLE DIGITAL GAUGE LCD
Codice prodotto: EPSF0000
INTERNATIONAL PATENT.
Digital gauge is a patented device that is unique in a way that one and the same unit can be pre-set and dedicated to measuring any type of value (volts, amperes, temperature, pressure, fuel consumption, etc) aboard a boat, ship, truck or a car. One model suits all. In addition the display area of the gauge is larger than that of other conventional gauges but its overall dimensions are much smaller. This allows to save dashboard space and to create better aesthetic solutions.
The distributor has an advantage of stocking only one type of the gauge and programming various indication functions to meet his or her clients%u2019 demand for a specific kind of gauge. The programming software is available free of charge on our web-site.
The gauge can be programmed to perform 10 different indication functions.
Voltmeter
Ammeter
Fuel Level Indication
Water Level Indication
Average Consumption Indication
Oil Pressure Indication
Engine Oil Temperature Indication
Engine Water Temperature Indication
Air temperature Indication
Hour Meter
The gauge sends a visual or an acoustic alarm in case a measured value exceeds a pre-set limit.
|
|
The MULTI 3100 is a multi-function instrument, delivering all the functions of Navman's DEPTH 3100 and SPEED 3100.
- Large backlit digits:1.2" [30mm] high (on upper line) and 0.8" [20mm] high (on lowerline)
- Swap functions between the upper and lower displays for optimum viewing
- Able to display speed from the paddle wheel sensor or from a GPS as SOG
- Speed range: 0-50 knots/0-58 mph/0-93 km/h
- Trip and sum logs auto range to 19,999 units
- Average and maximum speeds
- Average and maximum speeds
- Select resolution of 0.1 or 0.01
- Trim speed function for tuning
- Variable damping for optimum readings in all conditions
- Countdown timer function (from 1 to 10 min.) Water Temperature (0°C to 37.7°C /32°F to 99.9°F )
|
|
|
Mounted either on the deck or down below the NXR multicontrol instrument is the primary display that users of NXR will mount both at the helming position and at the navigation console. This instrument allows the user to access any of the digital information provided by the NEXUS Network, and in any combination. The display shows the data in clear, easy to read digits, with both primary and secondary readouts. Built to withstand the toughest conditions, it also allows the user to access a comprehensive range of informationat the press of a button via a built-in remote control complete with four dedicated preset buttons that allows the selection of up to 10 favourite settings. The result is that the helmsman or navigator can pre-programme a series of preferred data combinations suited to different points of sailing or particular locations, thereby saving valuable time in adjusting instruments at critical moments.
|
|
|
Advanced multi-function, high-contrast round dot matrix gauge displaying graphic and numerical digital data. NMEA 2000® data communications certified, and connect within an affordable, high-performance LowranceNET® network to display real-time readings from an array of compatible electronic probes (E.P.s), like fluid level, temp, speed, and more!
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
|
Seaview modular mast are available in 3 and 4" diameter aluminium tube. There are adapted for any kind of Radar, TV and Satcom antennas. They can have either a fix, ajustable or thru deck fitting. Accessories will complete the unit will lights, davit for HB engine....They are cut to the request lenght from 50 cm up to 5 Meter.
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
| ... products without information |
| |
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
|
Seaview modular mast are available in 3 and 4" diameter aluminium tube. There are adapted for any kind of Radar, TV and Satcom antennas. They can have either a fix, ajustable or thru deck fitting. Accessories will complete the unit will lights, davit for HB engine....They are cut to the request lenght from 50 cm up to 5 Meter.
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
|
Seaview modular mast are available in 3 and 4" diameter aluminium tube. There are adapted for any kind of Radar, TV and Satcom antennas. They can have either a fix, ajustable or thru deck fitting. Accessories will complete the unit will lights, davit for HB engine....They are cut to the request lenght from 50 cm up to 5 Meter.
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
|
|
see the results for the following category : 
