|
|
|
|
7.15 m
23' 6"
|
|
|
Frauscher presents an exceptional special edition of the 686 Lido
The passion to build unique boats and the ambition to realise innovative concepts are a strong motivation for the brand Frauscher to initiate new solutions, without forgetting about tradition, friendship and origin. To live up to these ideas, the aim to build a notable special edition was born.
Many of the above values and a more than 25yearlong friendship tie the families Frauscher and Feltrinelli together. Over the years an intensive collaboration and trust developed, allowing the family Feltrinelli to honour the request of the Frauscher shipyard to dedicate this special project to the great racer Dino Feltrinelli - limited to 9 unique creations with boat names that were of dear value to Dino and with a propulsion solution selected by Feltrinelli, that would have sure made him proud.
In addition Frauscher and longstanding partner arge.ateliers invited Annette Hinterwirth - a designer of the same origin and passion - to come on board and join forces to create an exceptional Lido - the 686 Lido "Editione Dino Feltrinelli".
|
|
|
|
7.17 m
23' 6"
|
|
|
At the time Engelbert Frauscher was ready to open his first yard, the United States already celebrated the heydays of boat racing. During the winter of 1921-22 the rules governing the Gold Cup Races were changed dramatically by the American Power Boat Association. The changes limited engine size, length and configuration of hulls. The rules committee said that they wished to encourage “Gentlemen’s Runabouts” that could be used for family recreation as well as racing.
Racing for pleasure, no rules needed, just style and honour. From 1922-28 numerous wonderful boats were created that now inspired us to take the essence and vision of the good old days and recreate the spirit in the 21st century – the outcome: Frauscher 717 GT a truly fantastic Gentlemen’s racer.
The well tested sub-construction was developed carefully along the lines of the Gentlemen’s racers that so much inspired us to realise this unique watercraft. The central motorization, the classic shaft propulsion together with the exceptional hull design allows for perfect manoeuvring at all times.
|
|
|
|
8.60 m
28' 3"
|
|
|
LIMOUSINE
Thirteen years ago. we adapted the concept of the "Venetian taxis" to the motor yacht market for a prestigious customer.
Often copied, our 'Limousine' concept, which is constantly being developed, has enabled us to remain at the peak of innovation.
|
|
|
|
8.69 m
28' 6"
|
|
|
|
This fast touring sportsboat was inspired by our Surfhunter 25 and by the original Hunt-designed “launch” which inspired Dick Bertram and confirmed the capability of Ray Hunt’s innovative hullform. More of a runabout and dayboat than the Surfhunter, this Harrier has a sleeker profile and more aggressive styling, yet offers more cockpit space for families and fishing.
|
|
| ... products without information |
| |
|
|
8.00 m
26' 3"
|
|
|
|
|
|
9.50 m
31' 2"
|
|
|
|
|
|
10.00 m
32' 10"
|
|
|
|
|
The veil is conic and wide, and can be held steady by fishing leads if there’s wind or to widen the base. It stays in a vertical shoulder bag, easy to transport.
|
|
|
Distinctive, Attractive and Distinguished. With elegant handles and spout, the Estancia™ Series provides the finishing touches to your luxuriously appointed interior. Classic styling with a contemporary edge makes these faucets a popular favorite on fine yachts, cruisers and sailboats around the world.
|
|
Every HYDROMAR yacht crane is constructed to the design standards for modern lifting appliances in a marine environment. They represent the finest "value for money" available.
HYDROMAR has models perfectly suited to every operation.
Each is the result of over 20 years experience in the design of modern electro-hydraulic lifting equipment.
HYDROMAR deck cranes are stronger than most, and offer an outstanding ease of operation with a wide range of standard drives, hydraulics and controls.
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
Three Phase Pedestals
Large boats and super yachts demand a large electrical supply and the Maricer Three Phase Pedestal Range can accommodate this requirement. Shown here with two 400V 63A 3 Pin + Neutral + Earth IP67 Socket Outlets, each socket outlet is protected by an earth leakage and over current device. A 4 Pole isolator is incorporated into the design to enable safe pedestal isolation. As with all pedestals in the Maricer Range, illumination can be via 16W 2D lamps or LED with photocell 'dusk to dawn' operation
|
|
From the company that is known for its high quality innovations, Eaton is the only company to offer a self-contained dual phase MegaYacht Unit. Made out of long lasting stainless steel, this MegaYacht Unit has a copper-wound, low noise transformer that is double insulated and epoxy overcoated.
These transformers are so tough that they have been submerged during a hurricane then washed and dried and are again in daily service (We don't recommend this test).The MegaYacht Unit delivers both single phase and three phase power to serve most mega yachts. Helping to keep your marina environment tranquil, the MegaYacht Unit has a low noise, highly efficient transformer that has isolation mounts to ensure a very quiet operation.
|
|
QUAI'OPS RANGE
IDEAL FOR HIGH POWER AND PULBIC PLACE
IP55 enclosure
made of aluminium
Rain-proof top
water and electricity distribution
|
|
Module Built in compliance with CE and lEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
|
Rolec has the largest range of super yacht services available in the marina services industry. The Megamaster was designed clearly with the super yacht in mind. This unit is completely adaptable and can be manufactured to suit your exact requirements. The Megamaster is constructed around a heavy-duty aluminium chassis and can be finished with one of three different outer covers. Electricity provided by the Megamaster can reach up to 600amp three phase with water supplies up to 3".
|
|
|
Aquarius has a structure suitable for marine environments, highly resistant to UV rays, accidental impacts and weathering, consisting of hot flow cast, pressure moulded elements made from SMC and BMC reinforced thermosetting material. The structure is self-extinguishing and belongs to the V0 class with 4.5 mm thickness according to the UL94 standard, unalterable up to temperatures comprised between – 40°C and + 110°C. All the components are fixed with stainless steel nuts and bolts. Aquarius has protective guards for the outlets and switches made from injection-moulded polycarbonate, shock-proof and self-extinguishing, belonging to class V2 with 4.5 mm thickness according to the UL94 standard, with anti-UV ray protective treatment and injected foam polyurethane seals. The doors open upwards and are lockable with keys.
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
Three Phase Pedestals
Large boats and super yachts demand a large electrical supply and the Maricer Three Phase Pedestal Range can accommodate this requirement. Shown here with two 400V 63A 3 Pin + Neutral + Earth IP67 Socket Outlets, each socket outlet is protected by an earth leakage and over current device. A 4 Pole isolator is incorporated into the design to enable safe pedestal isolation. As with all pedestals in the Maricer Range, illumination can be via 16W 2D lamps or LED with photocell 'dusk to dawn' operation
|
|
|
Aquarius has a structure suitable for marine environments, highly resistant to UV rays, accidental impacts and weathering, consisting of hot flow cast, pressure moulded elements made from SMC and BMC reinforced thermosetting material. The structure is self-extinguishing and belongs to the V0 class with 4.5 mm thickness according to the UL94 standard, unalterable up to temperatures comprised between – 40°C and + 110°C. All the components are fixed with stainless steel nuts and bolts. Aquarius has protective guards for the outlets and switches made from injection-moulded polycarbonate, shock-proof and self-extinguishing, belonging to class V2 with 4.5 mm thickness according to the UL94 standard, with anti-UV ray protective treatment and injected foam polyurethane seals. The doors open upwards and are lockable with keys.
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
Three Phase Pedestals
Large boats and super yachts demand a large electrical supply and the Maricer Three Phase Pedestal Range can accommodate this requirement. Shown here with two 400V 63A 3 Pin + Neutral + Earth IP67 Socket Outlets, each socket outlet is protected by an earth leakage and over current device. A 4 Pole isolator is incorporated into the design to enable safe pedestal isolation. As with all pedestals in the Maricer Range, illumination can be via 16W 2D lamps or LED with photocell 'dusk to dawn' operation
|
|
|
Aquarius has a structure suitable for marine environments, highly resistant to UV rays, accidental impacts and weathering, consisting of hot flow cast, pressure moulded elements made from SMC and BMC reinforced thermosetting material. The structure is self-extinguishing and belongs to the V0 class with 4.5 mm thickness according to the UL94 standard, unalterable up to temperatures comprised between – 40°C and + 110°C. All the components are fixed with stainless steel nuts and bolts. Aquarius has protective guards for the outlets and switches made from injection-moulded polycarbonate, shock-proof and self-extinguishing, belonging to class V2 with 4.5 mm thickness according to the UL94 standard, with anti-UV ray protective treatment and injected foam polyurethane seals. The doors open upwards and are lockable with keys.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
