|
|
DMA Monitoring
DMA ppm Monitor
Description:
-The most efficient oil discharge monitoring!
-Accurate measurements
-Latest in fluorescence technology
-Chemometric data treatment
-Maintenance free
-Self cleaning optic by vibration and ultra sound
-Interface to GPS and computer system
-User friendly software
-Remote service and support
-Customized user template
-track discharge history
The DMA monitoring system ensures the most accurate and maintenance free monitoring based on the latest in fluorenscence technology and chemometric data treatment. Our technology measures the actual oil concentration in water and not particles opposed to monitors based on light diffusion.
The DMA monitoring solutions include interface to GPS and computer system, customized user template and possibility for remote service and support. This makes it possible for users to track discharging history for periods of up to 30 days as well as other customized features.
|
|
|
|
|
|
|
|
The OCD CM is the result of market research and development of new technologies to produce a monitor that exceeds the existing standards and meets the requirements requested by customers and operators worldwide. The OCD CM has been specifically designed to eliminate the effects that cause false instrument alarms where the water contains high levels of solid particulates. In particular the unit has been designed to ignore the presence of iron oxide, of which most bilges have a plentiful supply, and output only the true oil concentration. All this in a package that is 25% the size of the OCD 2M. The OCD CM also has built in diagnostic features and the ability to show the inspectors if the software has been tampered with. Additionally the unit runs through a self check diagnostic routine on power-up that ensures all parameters are within limits and activates the alarm relays at their prescribed set points. All user adjustable parameters are accessed from an easy to use pushbutton menu from the front of the unit.
|
|
|
The Oil Discharge Monitoring Equipment (Smart ODME)has been designed to provide means of monitoring,recording and controlling the ballast discharge inaccordance with the requirements of MEPC 108(49). Discharge limits are set at 30 Litres per nautical mile and atotal discharge expressed as a proportion of the previouscargo for dirty ballast.The requirements of the MARPOL Convention are that all oiltankers with a gross tonnage of 150 GRT and above musthave an oil discharge monitoring and control system installed, incorporating an approved oil content meter, witha starting interlock and an automatic overboard valvecontrol system. The Smart ODME includes all componentsrequired to meet MEPC 108(49) and is designed for easeof installation and maintenance.The requirements in IMO Resolution MEPC 108(49) apply totankers with a date of keel laying or equivalent stage ofconstruction of 1st of January 2005 or later.
|
|
SmartSafe
Bilge Overboard Security System
Demonstrate Marpol Compliance Cost Effective Prevention of illegal dischargeEasy installation %u2018plug n play%u2019, low maintenanceCapable of recording other miscellaneous ships dataCompatible with all IMO Resolutions
MEPC 107 (49)MEPC 60 (33)A393X
|
|
With the Marinfloc White Box System, you can be confident that no water with oil content exceeding national or international requirements, where applicable, is accidentally pumped overboard.
The system works online and monitors the oil content in the water from, for example, your oily water seperator or bilge water cleaning system. When the water from either of these systems is clean enough for discharge, a valve is opened and the water is pumped overboard. The start- and stop-time of the discharge, the volume, the ship's position and the oil content over the discharge cycle is recorded and stored in the system.
|
|
|
|
|
|
|
The Bilge Overboard Security System (Increased Assurance Discharge Monitoring System, IADMS), from Rivertrace Engineering Ltd, has been developed out of repeated industry requests to provide a failsafe method of prevention against illegal oil discharge to sea.
Illegal discharges involving “Magic Pipes” and ‘Empty’ Oily Water Separators are seen as a major contributor to pollution of the seas and vessels are under increasing scrutiny by Port State Control (PSC) Surveyors globally.
The system is primarily designed to prevent illegal oily water discharge to sea and will record if one has taken place.
Equipment supplied under MEPC 107(49) has a degree of inbuilt increased assurance in that separator status is recorded along with time and date and it should not be possible for clean water to be used when in the discharge cycle, but even this record and control cannot prevent the “Magic Pipe” type of discharge.
For a system to be effective, all aspects of the discharge process should be monitored and recorded. The IADMS achieves this utilizing the separator control, oil content output, flow rate and cumulative flow through the discharge pipe and in addition records the ships GPS position, speed and track.
|
|
|
|
|
|
|
Remote Oil Spill Detection & Alarm System
Monitoring and detecting oil spills as they occur in real-time accelerates response time – thus substantially reducing cleanup/remediation costs and potential damage to the environment. Building on 60 years of sensor/systems innovation, InterOcean Systems Inc has developed the optimum solution for this requirement. Slick Sleuth™ is a highly effective, cost-saving system which is easy to install and is totally autonomous. Because the optics-based oil detection sensor is mounted above the water, maintenance and downtime are virtually eliminated. There is no bio-fouling, leaking, exposure to pollutants or debris, mooring hassles, or other liabilities often associated with in-water sensor packages.
Slick Sleuth™ is an automated, optical (non-contact), oil-on-water sensor system that remotely alerts users to the presence of oil as an early warning mechanism (not unlike a ´smoke alarm´ for oil spills). If oil is detected, the system generates signal output for real-time alarm, computer display, and auto-dial phone alert. The signal may also be used to actuate (switch open/close) valves, a feature often used in industrial application to prevent (what every environmental manager fears) discharge of polluted oil-laden outfall into the environment from a facilities retention ponds, waterways,outfalls, sumps, etc...
Slick Sleuth™ is effective for spill monitoring in a wide array of applications, including offshore, ports and harbors,industrial/petrochemical, power plants, manufacturing facilities, intake protection, protection of sensitive habitats, etc...
|
|
The G2000 Ambient Oil Mist Detector is used to monitor pump rooms, engine rooms, and other facilities. As the IMO points out, most engine-room fires are the result of the build up of oil mist. Thus early alarms on the formation of oil mist are crucial to avoiding fires.
Key Features
- Marine Type Approval by Lloyd's Register
- Large area coverage per unit - up to 9 m
- Satisfy vetting inspectors
- Cost effective protection against high damage risk
- Integrate output signal into on-board alarm system
- Focused high-power light beam
- Easy onfiguration of early warnings and alarms
- Multiple alarm levels
- Easy to install
- Easy to maintain
|
|
|
IMO Resolution MEPC 107 (49) came into effect on 1st January 2005 and applies to all new installations of oil content monitors within engine room spaces. This applies to existing ships and ships whose keel is laid on of after 1st January 2005. The Rivertrace "Smart-Cell" Bilge Alarm meets the requirements of MEPC 107 (49) for monitoring of 3 oil types: Fuel Oil, Diesel and Emulsions. By utilising the "Smart- Cell" Detector Array Technology, technology developed by Rivertrace, the Bilge Alarm analyses all three oil types simultaneously without the need for re-calibration. A manual cell clean device is included as standard to easily enable routine maintenance. Optical cell fouling is recognised as a leading cause of monitor malfunction or incorrect reading. By simple operation of the manual clean device, the "Smart-Cell" remains in optimum operating condition.
|
|
OCD 50M Boiler Condensate / Cooling Water Monitor
A monitor designed to cater for the special conditions associated with high sample temperatures. This unit will detect oil in much smaller quantities great reliability and repeatability. Increased boiler protection from oil contamination. Applications Engine Cooling water. Boiler feed water Boiler condensate Fresh water monitoring Safe and hazardous area installations Features 2 versions A 0-10ppm B 0-200ppm External sample cell to keep high temperatures away from the electronic compartment. Sensitivity to provide a normal measurement range of 0-10 ppm. Display resolution of 0.1 ppm. High temperature optic cell glass and cell seals. Option of stainless steel wetted parts. Option of stainless steel housing. Autoclean. Germanischer Lloyd approved.
|
|
| ... products without information |
| |
|
The RO-TANK is a high quality durable storage tank that can be used on land or floating in water. RO-TANK is manufactured in heavy duty neoprene rubber.
|
|
|
|
|
|
|
Mavi Deniz's pillow tanks are used for the temporary storage of recovered liquids. Available in a range of sizes, storage tanks are lightweight, portable, and easily assembled without tools. Collapsible pillow tanks that provide temporary as well as long term liquid storage.
Our pillow tanks can be used for potable (drinking) water, fruit juices, wastewater, chemicals, oils and more.
Versatile usage includes land based operations and vessel decks.
Standard tanks are fabricated with durable fabric that provides ultraviolet light, chemical and abrasion resistance.
Smaller sizes are square shaped, while larger are rectangular
Transportable pillow tank is designed with straps for use in variety of cargo applications including trucks, trailers, boats and planes.
Standard sizes - from 0.5 to 3.780 m3.
- Ideal for uses in Oil Spill Recovery Operation, Remote Storage, Fire Fighting, Military Operations, Remediation Projects, Potable ( drinking ) Water Tank, Gray Water Tank, Liquid Transportation, Portable Water Tank, Diesel Fuel/Jet Fuel/Waste Water/Sewage Storage, Fruit Juice Distribution, Chemical Storage, Concentrate Tranportation
- Simple maintenance, long service life
- Available in urethane, rubber or vinyl fabrics
- No tools required.
- Large storage capacity
- Optional accessories, including repair kits, spare parts and carry bag for easy transportation
|
|
|
|
|
|
|
Mavi Deniz towable storage tanks are used for the temporary storage and transportation of recovered liquids. Use for temporary storage of liquids. Suitable for decontamination of equipment, personnel and animals. Ideal for decanting of water during skimming operations. Ideal for oil spill cleanup operations.
Mavi Deniz towable oil storage tanks are used at a port or harbor for temporary storage of oil oil light fuels that have been recovered by a skimmer. Oil recovered during skimming operations can be pumped into the towable oil storage tanks which can then be moored until convenient to empty or immediately towed to oil disposal site. Can be used on land for temporary dry land storage or floating in the water. Storage tanks can be towed empty or full by boats.
- Ideal for operations in Oil Spill Recovery, Pipeline and Offshore Rig Service, Bulk Fluid Transfer, Portable Water Storage and Transport, Bilge, Sewage and Waste Water Transportation
- RF Welded from high strength coated fabrics
- Available in sizes from 1 m3 to 250 m3
- Towed by vessels, empty or laden
- Fully collapsible for easy storage
- Wooden or aluminum storage containers available
- Optional accessories, including storage container, hoses, air pumps, recovery and offloading pumps
|
|
|
|
|
|
|
Mavi Deniz's Emergency oil storage tanks are used for the temporary storage of recovered liquids. Available in a range of sizes, storage tanks are lightweight, portable, and easily assembled without tools.
Emergency oil storage tanks are suitable for temporary storage of many kinds of liquids including oils and wastewater.
The Mavi Deniz’s tank is a temporary storage tank which can be used for storage of hazardous materials or liquids like corrosive fluids, acid, oil, water. It is lightweight, easily transportable to site, and can be assembled rapidly without tools.
Available in 8 sizes for volumes ranging from 1.500 litres to hold 20.000 litres.
- Ideal for operations in Pollution Cleanup & On Site Treatment, Effluent Containment, Water Storage & Treatment, Demulsification of Oily Wastes, Fire provision, Laboratory demo / Mixing tank, Test Tank for Floating Equipment, Oil Water Separation, Equipment Washdown, Temporary Liquid Storage
- Aluminum pipe frame construction
- Smooth profile facilitates easy cleaning
- High strength PVC fabric standard, others available
- Fast setup by one person. No tools required.
- Optional accessories, including liners, ground cloth, roof covers, vents, drain fittings, repair kits, spare parts and carry bag for easy transportation
|
|
Mavi Deniz's self supporting storage tanks are used for the temporary storage of recovered liquids. Available in a range of sizes, storage tanks are lightweight, portable, and easily assembled without tools. Mavi Deniz Self Tanks are self erecting foldable tanks used for the storage of oil, water and other liquids.
Self Tanks are ready to be deployed at any time, as they hold themselves up without a frame due to the floating collar which rises as the tank is filled. They include handles at the bottom, allowing the base of the tank to be positioned as desired.
Self Tanks are made of flexible and oil resistant material. Their design, fabric and manufacturing process make them hard wearing and suitable for intensive use.
All Self Tanks can be folded up to facilitate transport and storage. They are supplied in a bag with handles making them easy to carry and deploy.
Standard sizes available from 3 m3 to 370 m3.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
