|
|
|
Extruded aluminium is an excellent material for making masts. This is where Selden has earned its reputation as world leader in mast making. Today Selden offers a full range of masts and rig equipment in both aluminium and carbon including booms, spinnaker poles, Rodkicker rigid vangs, furling systems and rig linings. All rigs are custom-made, through every calculation and detail, lor each individual boat. We know how much depends on the rig, and there is no room for compromise.
|
|
Selden aluminium spinnaker poles give you fast and safe spinnaker handling. All the fittings have well-rounded edges to prevent personal injury and damage to equipment. The extrusions are lightweight and very durable, and are fitted with pole savers to shield the pole against damage from forestay and shrouds.
|
|
| ... products without information |
| |
The adjustable radar arches accommodate 14” - 18” satdomes and bridge over any closed radome or 4’ open array radar. These arches are constructed of high quality Marine Grade Aluminum, treated with a three stage primer and finished with a brilliant white powder coat.
Optional DM-light bars shown in accessories.
|
|
Our Open Array Power Mounts are constructed the same as our Power Mounts with high quality marine grade aluminum and finish with a brilliant white powder coated finish. All Open Array Power Mounts have an 8" x 8" square base and a 20° Aft leaning profile. Our newest Open Array Mount includes a heavy duty bolt on light bar which accepts all of our Power Mount Accessories
|
|
Similar to our Power Mounts Plus, these mounts are constructed of high quality marine grade aluminum and treated with an anodized primer then finished with brilliant white powder coated finish. Our Standard Power Mounts have a 7" square base, with a 20° aft or 20° forward leaning profile. Each unit has a waterproof radar cable gland positioned aft and below the top plate. Unlike our Power Mount Plus these Standard Mounts are not Light/GPS Bar capable. *Universal Fits: Furuno, Koden, JRC, Northstar & Lowrance 15-18" radar domes.
|
|
Based on our unique ellipse extrusion, Scanstrut's Aluminium PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Available in a forward leaning profile for radome installations and an aft leaning profile for open-array installations.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
|
Our SEAVIEW Satdome Power Mounts are constructed the same as our other Power Mounts and also have a 20° Aft leaning profile. A stylish airfoil extrusion is used on all of our Power Mounts.
|
|
OPTIMIST aluminium trolley
Aluminium Optimist trolley: Lighter than ref 3200, and easy to fit, seconds to remove, and take in your car chest. Better for top sailors
|
|
Carriage of setting to water aluminum for Center-boards
Leger-Dismountable-Adjustable-towable DER3L
|
|
Carriage of setting to water aluminum for Center-boards
Leger-Dismountable-Adjustable-towable DER1 & DER1L
|
|
Carriage of setting to water aluminum for Optimist
Leger-Dismountable-adjustable OPT1 & OPT1L
|
|
Carriage of setting to water aluminum for Catamaran
Leger-Dismountable-adjustable CATA2 & CATA2L
Frame Anodic Aluminum
6 shoes of yellow protection (good visibility)
4 low wheels pressure dismountable
Crutch of anchoring
Nuts and bolts stainless
Overall length: 3m30
Width bearing adjustable hull: 2m17 with 3m00
Weight: 24kg
|
|
The UL Ti MATE 75 SA 'Super Adjustable' (patent pending) weldin from Underwater Lights LIMITED ™ for aluminum and steel hulls can be installed in the transom or the hull. The SA reflector unit allows a change in beam direction of up to 20 degrees. This is available with either a 150 or 250 watt metal halide lamp with a 110-230 volt ELECTRONIC ballast, perfect for DC power on a yacht with either and aluminium or steel hull. A 30 and 50 degree angle is also available in both materials.
S00330 - 75 - SA - UL Ti MATE 75 SA 30 Degree Stainless Steel
S00350 - 75 - SA - UL Ti MATE 75 SA 50 Degree Stainless Steel
S00630 - 75 - SA - UL Ti MATE 75 SA 30 Degree 5083 Aluminium
S00650 - 75 - SA - UL Ti MATE 75 SA 50 Degree 5083 Aluminium
|
|
REPLACING BULB: Can be done from within vessel
BULB USED: 600-watt Metal Halide
LUMENS: 160,000
LIGHT LIFE: Approximately 6000+ hours
LENS TYPE: Borosilicate glass lens is 0.6"/15mm
HOUSING: Aluminum
POWER SUPPLY:
Our light is 12 volt start up current 18 amp for about 25 second & 3.5 amps continuous
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft
|
|
Aqua Lights are sure to illuminate your water and the fish that surround you. Aqua Lights is your best source for premium marine underwater lights at deeply discounted prices!
BULB USED: 175-watt metal halide bulb
LUMENS: 27,000
LIGHT LIFE: Approximately 6000+ hours
REPLACING BULB: Can be installed from inside your vessel
LENS TYPE: Borosilicate glass lens is 0.5" thick
HOUSING: Aluminum
POWER SUPPLY: Dual ballast 120 (1 phase); 240 (1 phase); 280 (3 phase) volt, Running current 1.5-0.75 amps
CABLING: Length of cable to ballast must not exceed 40ft 15ft supplied; Custom length available
INSTALLATION:
12" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 5ft to 8ft
|
|
Aqua Lights are sure to illuminate your water and the fish that surround you. Aqua Lights is your best source for premium marine underwater lights at deeply discounted prices!
BEST MOUNTING SURFACE: Weld-in Aluminum
REPLACING BULB: Can be done from within vessel
BULB USED: 75 watt Halogen bulb
LUMENS: 1,250
LIGHT LIFE: Approximately 6000+ hours
LENS TYPE: Borosilicate glass lens is 0.4"/10mm
HOUSING: Aluminum
INSTALLATION:
6" to 48" below water line
(Lenses tested to a depth of 300ft)
Spacing between lights is 6ft to 8ft
|
|
The Sea Vision SV14 weld in model for aluminum hulls can be installed in the transom or the hull, it utilizes a 150 watt metal halide lamp and 110 or 230 volt AC power. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0-50 degree. All angle options are available on request.
|
|
Overall lenght 16,84 m
Hull lenght 16,04 m
Waterline lenght 15,14 m
Beam 4,80 m
Displacement 12,5 T
Ballast weight 3 T
Draft 1,20 m / 3 m
Mainsail 68 m²
Solent (100%) 62 m²
Sail area 130 m²
Power 62 ch
Water tanks 2 x 240 l
Fuel tank 2 x 260 l
|
|
Overall lenght 17,80 m
Hull lenght 16,95 m
Waterline lenght 15,75 m
Beam 5,25 m
Light displacement 21 T
Loaded displacement 26 T
Draft 1,30 m / 3,50 m
Lead ballast 7 T
Genoa 80 m²
Mainsail 80 m²
Spinnaker 195 m²
Water tanks 1200 l
Fuel tanks 900 l
|
|
Ces bateaux, connus sous le concept ULDB aluminium (Ultra Light Displacement Boat), sont des bateaux rapides et sûrs destinés à la grande croisière et au grand voyage.
Très faciles à manier, un équipage réduit en tire facilement la quintessence dans le plus grand confort.
Le ballast sur chaque modèle permet au bateau de garder une faible gîte garantissant, ainsi performance et confort.
Dotés d’une coque en forme élégante et racée, les Cigales dessinés par Jean Marie Finot se distinguent aussi par un plan d’aménagement original et très confortable, avec un très vaste carré sous le cockpit.
|
|
Overall lenght 13,80 m
Hull lenght 12,80 m
Waterline lenght 12,15 m
Beam 4,10 m
Displacement 8,5 T
Ballast weight 2 T
Draft 1,50 m / 3 m
Mainsail 62 m²
Solent (100%) 41 m²
Sail area 103 m²
Power 50 ch
Water tanks 2 x 200 l
Fuel tank 2 x 220 l
|
|
Overall lenght 19,20 m
Hull lenght 18,24 m
Waterline lenght 16,75 m
Beam 5,50 m
Light displacement 25 T
Loaded displacement 30 T
Draft 1,35 m / 3,80 m
Lead ballast 9 T
Genoa 90 m²
Mainsail 90 m²
Spinnaker 220 m²
Water tanks 1200 l
Fuel tanks 1400 l
|
|
|
|