|
|
NAUTIX GRIP :Transparent non skid paint
|
|
Nautix DB: Bilges and locker paint.
|
|
L2 : High gloss 2-pot polyurethane enamel
|
|
|
Interdeck is a tough polyurethane low sheen deck coating containing a fine mineral aggregate providing a hard wearing, slip resistant surface. It is easy to apply, by brush or roller, on all substrates.
|
|
A hard wearing and chemical resistant coating for the protection of bilges, lockers and bulkheads from moisture penetration and general wear and tear.
Danboline is an easy to clean coating and is resistant to oil and fuel spillages.
|
|
Awlgrip Topcoat is a polyester based high gloss topcoat giving long lasting gloss and color retention.
Awlgrip Metallics is a high gloss topcoat used to create a special effect finish.
|
|
When topcoat application conditions are far from ideal, Awlcraft 2000
is the coating that will deliver a smooth, high gloss finish.
Producing a rich lustrous finish similar to our famous Awlgrip, Awlcraft 2000 is ideal for use in situations where dust or fluctuating temperatures are a potential problem or where faster project turn-around time is critical.
Its unique, fast drying formula helps reduce dust-free time between coats.
Easy application
Quick drying
Long lasting, mirror-like finish
For use above the waterline only
Custom colors available
Awlcraft 2000 Acrylic Urethane Topcoat- See Stock List for F color codes on the website.
|
|
OVERVIEW:
Rust-Oleum Marine Coatings Topside Paint provides gloss retention and UV resistance in extreme weather conditions. Apply to fiberglass, wood or metal surfaces above the waterline. Flexible formula is easy to apply.
PRODUCT FEATURES:
- UV resistance
- Gloss retention
- Durability in extreme weather conditions
|
|
|
Brightside® is a polyurethane yacht finish containing the unbeatable strength and durability of Teflon®. This produces a tough, high-gloss easy-clean surface that is remarkably resistant to abrasions, stains, chemicals and dirt.
|
|
|
A high performance, extremely tough, long-lasting two pack undercoat for use under Perfection® finish. The semi-gloss finish allows easy checking of hull fairness. Excellent covering power (opacity).
|
|
Awlgrip Topcoat is a polyester based high gloss topcoat giving long lasting gloss and color retention.
Awlgrip Metallics is a high gloss topcoat used to create a special effect finish.
|
|
| ... products without information |
| |
NAUTIX GRIP :Transparent non skid paint
|
|
|
Interdeck is a tough polyurethane low sheen deck coating containing a fine mineral aggregate providing a hard wearing, slip resistant surface. It is easy to apply, by brush or roller, on all substrates.
|
|
| ... products without information |
| |
|
|
|
|
|
While not a breaking off innovation, this new generation of fouling release in aqueous phase treatment is one of the top last antifouling paintings.
It can be used on all sea boats or river boats.
Its main benefit is its innocuousness. It is a biocide-free and toxic solvent-free, therefore not hazardous for the aquatic environment and the human health.
The objective is to repel sea life without killing it.
«Seawax Fouling Release® » is mostly recommended for using on boat hulls : weight and water resistance, hydrodynamic trail are therefore reduced. Full consumption is also reduced and the hull requires less cleaning.
Its ingredients prevent and/or delay the fixation of microorganisms such as algaes, shells or shellfish and/or make it very unstable.
It brings its contribution to the preservation of sea life.
Also, there is a « self cleaning » effect when the boat sails, a water pressure is applied to the hull, all organisms then come off the substrate.
«Seawax Fouling Release® » is an alternative solution compared to actual paints, also innovative with obvious benefits for applicators.
Its technical features offer very easy to apply conditions and short drying time.
|
|
| ... products without information |
| |
|
|
|
|
|
Seawax Primer® is an « eco-designed » etch primer in aqueous phase. It is a mono-component product based upon a polyurethane resin.
It can be used on all sea boats or river boats.
This coating can be applied directly onto the substrate or onto existing coatings and offers very easy to apply conditions and short drying time.
Seawax Primer® applies to steel, aluminium, wood, iron, polyester (except polypropylene and polyethylene) boat bodies, under works, upper works and superstructures, to soft and rigid PVC beacon or mooring buoys in order to provide a strong antifouling and /or gloss paint.
Because it is both highly resistant and soft, it protects boat bodies against mechanical defects (cracks).
A deeper bright look is obtained through a satin-finish.
It improves adhesion to a substrate coated with an existing antifouling paint or a coating in poor condition.
A short drying time allows a shorter recovering time.
It is an ideal insulator that contributes to the waterproof of the substrate. Its original formula prevents or retards corrosion.
|
|
... see all the products in the category
Primers
|
|
TIKALFLEX primer P is a special adhesion mediator containing solvent on PU basis for the products of the TIKALFLEX series with the gluing or joining of oil containing woods, especially teak wood. During the gluing of aluminium, steel, GFK or woods, that contains no oil, can generally be done without the employment of TIKALFLEX primer P.
|
|
|
|