|
|
Speedlink is the new trigger snap shackle dedicated to spinnaker operations on racing boats and offering an excellent weight / performance ratio.
Ultra lightweight: developed by using finite element analysis software, Speedlink has an optimised design thanks to its shape, cut-outs and ribs. Its make it extremely design and gives its one of the best strength/weight ratios on the market.
Easy opening: opening under load, whether manually or using release fid, is easy and effortless thanks to the generous passage diameter and its optimised slopes.
No accidental opening: the special shape of the latch reduces inertia and avoids unintentional opening, especially under impact.
Sturdy: Speedlink is forged in HR stainless steel and can bear outstanding working and breaking loads for a minimum weight.
Modern design: its ultra-technical lines avoid excessive rope wear and prevent adjacent lines from jamming.
|
|
Fully dropforged product with high quality stainless steel
Outstanding working and breaking loads
For any kind of fastening applications (shrouds, lilfelines, blocks...)
Delivered with bolts and counterplate
Max tightening torque : 2.3 Nm
|
|
- HR Forged snap shackle (Grade 17.4 ph stainless steel) with swivel eye
- Free rotation of the snap shackle thanks to the swivel eye
- The plunger pin is set captive into the hook and cannot become detached
- Excellent working and breaking loads
- Easy to open by pulling the plunger pin (possiblity to attach a lanyard)
|
|
HR forged trigger snap shackle with swivel eye
The opening is made by hand (low load) or by using a release fid
Ideal to attach one line (halyard, sheet)
Free rotation of the snap shackle thanks to the swivel
|
|
Key pin shackle forged in grade 316L stainless steel
Opening and closing is done simply by rotating the pin half a turn
No risk to lose the pin as it remains attached
Outstanding working and breaking loads
|
|
Self-locking D shackle forged in grade 316L stainless steel
The pin is locked into one of the indentations
No risks of loose due to vibrations
Outstanding working and breaking loads
|
|
|
|
|
|
|
The KF-H (patented) is the only system on the market that combines the furling and the locking mechanism in the same unit. The lock mechanism allows to lock the swivel, the halyard and the sail directly onto the mast. The lock works automatically using the halyard to lock and to unlock. Used for flying sails (such as staysails and gennakers) it replaces the usual block system where luff tension comes from the long 2/1 or 3/1 halyard and a lot of compression in the mast. The system and the sail are locked on the mast and the luff is tensioned from the bottom by a 2/1 or 3/1 purchase placed under the lower part of the furler. The compression in the mast is minimized and it is possible to use a smaller and lighter halyard as it only carries the weight of the sail. Once the system is dropped on deck, there is only the very light hollowed male end remaining on the mast and the furling-lock mechanism is on deck and accessible for maintenance.
Advantages:
- no more structural halyard
- no more blocks above the swivel
- less compression in mast = safer
- smaller halyard diameter = lighter
- straighter sail luff
- very light weight at the top of the mast when system is not in use.
|
|
Symetric model allowing to use the toe rail for attachment (blocks, barber hauler, boom brake...)
It prevents from damaging the toe rail
Easy installation by unscrewing the pin
|
|
|
Sold separately or with a furler, this new patented system from Karver allows to lock the stay and the sail on the mast very easily. From 1,5T to 15T
|
|
Self-certified with Working Load Limit (W.L.L.) and Safety factor of 5 for fastening, securing in Industry, Paragliding, Decoration
STANDARDS EN 362 + EN 12275 certified for Personal Protective Equipment (P.P.E.) in industry & mountaineering, Climbling, Caving activities - Breaking Limit: 25Kn longitudinal / 10Kn transversal
|
|
Self-certified with Working Load Limit (W.L.L.) and Safety factor of 5 for fastening, securing in the entertainment Industry
NOT AVAILABLE: STANDARDS EN 362 + EN 12275 certified for Personal Protective Equipment (P.P.E.) in industry & mountaineering, Climbling, Caving activities - Breaking Limit: 25Kn longitudinal / 10Kn transversal
|
|
Self-certified with Working Load Limit (W.L.L.) and Safety factor of 5 for fastening, securing in Industry, Fishing, Marine fittings, Entertainment industry, Agriculture, DIY, Decoration
STANDARDS EN 362 + EN 12275 certified for Personal Protective Equipment (P.P.E.) in industry & mountaineering, Climbling, Caving activities - Breaking Limit: 25Kn longitudinal / 10Kn transversal
|
|
Self-certified with Working Load Limit (W.L.L.) and Safety factor of 5 for fastening, securing in Industry, Fishing, Marine Fittings, Decoration
STANDARDS EN 362 + EN 12275 certified for Personal Protective Equipment (P.P.E.) in industry & mountaineering, Climbling, Caving activities - Breaking Limit: 25Kn longitudinal / 10Kn transversal
|
|
Self-certified with Working Load Limit (W.L.L.) and Safety factor of 5 for fastening, securing in Industry, Parachute, Paragliding, Entertainment Industry, Agriculture, DIY, Decoration
STANDARDS EN 362 + EN 12275 certified for Personal Protective Equipment (P.P.E.) in industry & mountaineering, Climbling, Caving activities - Breaking Limit: 25Kn longitudinal / 10Kn transversal
|
|
|
STANDARDS EN 362 + EN 12275 certified for Personal Protective Equipment (P.P.E.) in industry & mountaineering, Climbling, Caving activities - Breaking Limit: 25Kn longitudinal / 10Kn transversal
|
|
Self-certified with Working Load Limit (W.L.L.) and Safety factor of 5 for fastening, securing in paragliding (connecting the reserve parachute to the ripcord)
STANDARDS EN 362 + EN 12275 certified for Personal Protective Equipment (P.P.E.) in industry & mountaineering, Climbling, Caving activities - Breaking Limit: 25Kn longitudinal / 10Kn transversal
|
|
Self-certified with Working Load Limit (W.L.L.) and Safety factor of 5 for fastening, securing in Paragliding (connecting the ripcord to the risers)
NOT AVAILABLE: STANDARDS EN 362 + EN 12275 certified for Personal Protective Equipment (P.P.E.) in industry & mountaineering, Climbling, Caving activities - Breaking Limit: 25Kn longitudinal / 10Kn transversal
|
|
|
U-Bolts All Stainless steel engineered construction complete with top plate, nuts and washers, supplied as standard. Collars on the shanks of the bolt whilst adding to the appearance also allows the nuts to be fully hardened up and help dissipate water seepage. For stronger anchorage points, we advise the additional stainless steel backing plates. The popular economy range of 'U' bolts are manufactured from Stainless Steel type 304 and have crimped ears.
|
|
Eight Models in electropolished Stainless Steel that are economical strong and reliable. All sizes over 6mm have a hole for securing wire.
1:'D' Shackle screw pin
2:'Bow Shackle' screw pin. The shape allows for more freedom of movement and room for multi connections.
3:Slothead. 'D' Shackle with slothead pins. Ideal where a more permanent fixing, or low profile head is required.
4:Twisted Shackle. With screw pin allows for attachment through 90°.
5:Captive Pin Half turn opens shackle but pin remains captured and cannot be lost.
6:Halyard Shackle. As above with safety pin. The extra halyard security pin is removable on both larger sizes, fixed on small.
7:Rigging Links Complete with clevis pin and safety ring.
8:Rigging Link HD
|
|
- Manufactured from type 316 stainless steel fittings.
- Custom designed for use with A303/Allslip slides.
|
|
|
Swivels Numerous swivels in various forms made from high grade marine materials offering extremely high break-loads for any application, be it marine or industrial. Although not designed for high-speed application all will work under heaviest loads.
|
|
|
|
