|
|
- Ideal for fitting a removable inner forestay (genoa or solent)
- Easy to install thanks to the snap shackle
- Robust and performant
- Strongly recommended when there is a furling system
- The wheel model offers an outstanding value for money + dimensions
- Technical data:
|
|
Selden rigging screws are made from high-grade, marine stainless steel.
The rigging screws have cold rolled threads and are polished for higher corrosion resistance. The threads are lubricated with Selden rigging screw oil prior to delivery. To keep your rigging screws in good condition, please clean and lubricate them regularly with our special rigging screw oil.
|
|
Stay Adjusters allow wire rigging systems to be altered by means of a clevis pin. All models constructed from stainless steel strip with different sizes and spacings.
The fine tune adjuster R4394 is a must for hotshot dinghy crews. Pivoting foot utilising three holes always gives a straight line between shroud and full anchorage point, plus a fine 2mm adjustment.
R4392 Shroud "SPINI" roller acts as guide for sheet when reaching. Fits all RWO shroud adjusters with 5mm, (3/16in.) holes.
Shroud Levers improve downwind performance by allowing the mast to lean forward and permitting the boom to be squared off. Another use of the lever is to instantly slacken the tension in standing rigging; both on boats and hang gliders. Two models are available, both having an easy to grip handle and adjustable throw. Both levers are strong enough for sailboats up to 5.9m. (18ft.) long and can be safely used in winds up to 20 knots.
|
|
Comprehensive range of traditional closed body rigging screws manufactured from high grade stainless steel with bright electropolished finish.
Tensioning can be achieved by using a tommy bar in the body central hole. Once tensioned, tighten lock nuts and feed ceasing wire round ends and through body hole.
For reliability all rigging products are regularly tested for fatigue and destruction to quoted figures.
NB End fittings can be varied to make other combinations i.e. Fork & Eye, Eye & Terminal etc. (50 min) within the style.
|
|
Sparcraft Rigging assembles and sells quality standing and running riggings. SP.R is based near RDM Sparcraft in La Rochelle, with whom a synergy allows to offer a mast/rigging package.
The selected parts are manufactured with the best alloys from European origin according to reliable and tested machining and forging methods. The numerous quality controls and a strict traceability placed SPR to the top of the rigging line.
|
|
|
Loos Cableware® Division provides the full line of MS21251 Turnbuckle Bodies (same as NAS649) in Brass, Steel, and Aluminum and use MS21256 Locking Clips to provide a positive lock with the mating part. Brass Turnbuckle Bodies are available with Nickel Plating for marine applications. Steel and Aluminum Turnbuckle Bodies are protected in accordance with MIL-DTL-8878. Loos Cableware® Division offers a full line of the MS21251 Turnbuckle Bodies and is a QPL manufacturer of these parts.
|
|
|
A highly sophisticated rigging screw. A price favourable alternative to the Blue Wave racing line, with all the features except the calibration scale.It features an adjustment nut, in black chromed high quality alu bronze, and an extra length thread terminal
|
|
|
The price favourable and durable Stainless Steel Rigging Screw line from Blue Wave has been a favourite among Riggers and yachtsmen for the last 50 years. It offers a wide variety of features. Laser engraved thread size, Blue Wave logo, and side marking of the left thread.
|
|
|
Navtec's latest entry in the turnbuckle market. Combines classic Norseman open-body design with the look of a swageless terminal to produce the most economical way to rig a boat with rod.
|
|
The Sta-lok terminal is a simple mechanical method of terminating wire ropes.
Manufactured from 316 Stainless steel,the Sta-lok terminal is stronger than the wire rope.
Available for wire sizes 3mm -12mm
|
|
Suitable for use with most types of swaging machine.
Available for wire sizes 4mm - 5mm.
|
|
Unique toggle action allows
full articulation in two planes.
Designed to fit most chain plates and fixing points.
Thread sizes 1/4" - 3/4" UNF
|
|
Suitable for use with most types of swaging machine.
Available for wire sizes 3mm -12mm
|
|
Forged from high tensile Bronze alloy.Chromium plated to give a highly polished finish.
Available in thread sizes 1/4" - 3/4" UNF
|
|
- Designed to fit most chain plates and fixing points.
- Available in thread sizes 3/8" - 1 3/8" UNF
|
|
By adjusting the backstay tension, you can increase your boat speed and point higher. Holmatro integral adjusters enable you to alter the backstay tension accurately and quickly. Holmatro backstay adjusters are made of lightweight aluminium and have the only two-speed integrated pump.
- Integrated single-speed pump
A single-speed pump means compact design and easy to reach maximum tension.
- Lightweight
Advanced design techniques and materials keep the weight to a minimum.
- Luminant pressure gauge
Makes reading the pressure gauge easy, even in the dark.
- Various colour options
Standard clear anodized aluminium finish. Black anodized or other colours optional.
|
|
Holmatro hydraulic cylinders are suitable for many applications on board, from tensioning backstays and forestays to controlling outhauls and travellers. A cylinder in combination with a control panel allows accurate and quick adjustment. Advanced design techniques and materials keep weight to a minimum.
HCL-10 Cylinder
Holmatro hydraulic cylinders are suitable for any tensioning application on board, from tensioning backstays and forestays to outhauls and travelers. A cylinder in combination with a Holmatro control panel allows for accurate and quick adjusting of your rigging tension.
|
|
Selden backstay tensioners have smooth, clean surfaces. Even the wire terminal is fully covered. These low-weight backstay tensioners are simple to use. All you do is insert a standard winch handle and turn. The tensioner has a maximum working load of 30 kN. The stroke is an ample 250 or 400 mm, depending on the length of the tensioner.
|
|
|
Ergonomics meets economics. The new Series 8 Integral Backstay Adjuster incorporates several key design improvements. The pressure gauge is positioned prominently, enabling fast, accurate reading of tension values. A longer pump handle produces faster pumping motion and more tension per stroke, which delivers greater performance out of modern masts. The feed tube is seated into the contour of the cylinder, resulting in a more secure design and integrated look. And its cost has remained highly competitive. In testing, the Navtec Series 8 Integral enabled sailors to increase rigging tension quickly, precisely, and easily. With each stroke of the handle, rake increased along with forestay tension, resulting in improved roller furling gear performance, sail shape, windward performance, and speed. Use of the specifically designed Integral toggle is strongly recommended.
|
|
QuikConnect - Toggle Fitting
Inboard end fitting. Machined Delrin end with toggle/jaw and fast pin. Compatible with stock spinnaker cars.
Available for 3.0, 3.5, 4.0, and 4.5 pole diameters.
|
|
|
The Blue Wave Eye Terminals all features, engraved wire size, Blue Wave logo, and swage depth marking for faster and easier swaging.
|
|
|
|
