|
|
Atlantic Marine system features non-corrosive materials specifically selected for their suitability in marine environment and subject to strict quality control at every stage of construction.
Aluminium chassis:
Chassis are made of aluminium marine alloy 6005 and designed as truss-frame. Longitudinal beams are custom-built extruded section (5 to 14 kg/m) while transversals and diagonals are Rectangular (R.H.S.) or Square Hollow Sections (S.H.S.). All members are assembled by MIG welding.
|
|
The Auto-Release cleat provides the neatest and best solution to the problem of how to lock-down a rudder blade yet allow it to flip-up if it hits the bottom or a solid obstacle in the water. The cleat holds ropes securely yet will release them immediately when the cleat is overloaded. Once tripped, it can be easily reset in seconds by just pushing the cleat back down into its base.
|
|
|
|
|
|
|
PUSH BUTTON MOORING LINE RELEASE
Imagine being able to release your boat's mooring lines at the press of a button. No more turning your guests into crew. It provides complete control at the push of a button. The AutoCleat will release any line configuration - loop, figure 8 or slip knot.
CLEAR DECKS AND PASSAGEWAYS
Smart boat design means clever utilisation of every space and surface available. The AutoCleat provides a strong, secure mooring point while berthed and when not required, retracts flush at the push of a button leaving those valuable surfaces uncluttered. No more stubbed toes and no more snagged fishing lines or halyards.
DESIGNED AND BUILT TO LAST
Cast from a high strength, corrosion resistant stainless steel, the horns of the AutoCleat give exceptional high side-load carrying capacity. With the remaining components manufactured from marine grade materials and composites, the AutoCleat comes complete with a 3 year warranty against manufacturing defects.
THE ULTIMATE CLEAT
The AutoCleat is the only mooring cleat that allows you to release your mooring lines, regardless of how the line is secured to the cleat and also retracts flush into the deck. International patent pending.
SIMPLE AND STRONG INSTALLATION
The AutoCleat has been designed with the home handy-man in mind. In less than 20 minutes using some basic tools, the AutoCleat can be installed and fully operational. Only two low amperage wires are required to power up the AutoCleat. The AutoCleat gains strength from being fixed into the deck of the boat.
THE LITTLE EXTRAS
Due to the unique design of the crossing 'horns' the AutoCleat secures the mooring line above the deck not on the deck and thus reducing line wear on the boat. The AutoCleat comes standard with a Power Failure Over-ride (PFO) button located in the deck plate. The PFO allows the unit to be operated in the event of boat electrical power failure, always providing a secure mooring location. For more informatiion visit www.strongmarine.com
|
|
CL268 - Racing Micros
CL268AN - Racing Micros (Hard Anodised)
Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Applications include Canoes (seat & rudder lines);
Dinghy control lines; Kitesurfing (5th line adjustment).
Manufactured from aluminium for a light weight and durable performance the CL268 is available in two finishes:
1. CL268 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL268AN has a hard anodised finish to give a hard wearing surface.
|
|
CL270 - Racing Micros with Becket
CL270AN - Racing Micros with Becket (Hard Anodised)
The becket holds the end of the rope under the cleat. No need for an extra fixing. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope.
Manufactured from aluminium for a light weight and durable performance the CL270 is available in two finishes:
1. CL270 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL270AN has a hard anodised finish to give a hard wearing surface.
|
|
With the CL205 the rope drops down into the teeth to give a quick, positive lock that is easy to release.
The cleat is maufactured from UV resistant plastic making it cost effective and ideal for holding rope in an outdoor enviroment. Its simple design has led to it being fitted on boats to farm equipment.
|
|
Cam cleat
Seldén cam cleats c-c 27 and 38 mm are made of carbon fibre reinforced polyetherimide. This material is selected for its high resistance to friction heat. There is also an aluminium version of cam cleat 38 made of hard anodised aluminium.
Full assortment of accessories such as fair leads, line guides, bull's eyes, risers and wedges.
|
|
|
Composite and aluminum versions with new teeth configuration for ease of cleating. The composite material is very robust offering greater wear resistance. For higher load applications, the aluminum version offers even greater strength and durability.
|
|
|
An elegant design in black or white nylon. The rope drops down into the teeth. Also available in Aluminium.
|
|
CL230 - Racing Junior MK1 with Roller
CL230 AN - Racing Junior MK1 with Roller (Hard Anodised)
CL230 can be rigged for adjusting a trapeze
|
|
A neat, compact alloy cleat.
Manufactured from aluminium for a light weight and durable performance the CL211 Mk2 is available in two finishes:
1. CL211 Mk2 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL211 Mk2AN has a hard anodised finish to give a hard wearing surface.
|
|
With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release.
Manufactured from aluminium for light weight and durable performance.
It is available in a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and coastal conditions.
|
|
With the CL254 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Will hold very high loads when used with high quality ropes.
Manufactured from aluminium for light weight and durable performance the CL254 is available in two finishes:
1. CL254 has a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and coastal conditions.
2. CL254AN has a hard anodised finish to give the ultimate hard wearing surface. Excellent for extreme coastal conditions.
|
|
With the CL201 the rope drops down into the teeth to give a quick and positive lock that is easy to release.
The cleat is maufactured from UV resistant plastic, making it cost effective and ideal for holding rope in an outdoor enviroment. Its simple design has led to it being fitted on boats to farm equipment.
|
|
|
For 4-8mm (5/32 - 5/16") ropes. Marine grade nylon. Fix with No 10 (4.8mm) screws, or 3/16" (M5) bolts.
|
|
One of our most popular cleats.
CL203 - Black Nylon.
CL203W - White Nylon.
An alloy version is also available - CL211 Mk1, as well as variations with a roller fairlead CL203W/S1 and with bottom roller CL203W/S2.
|
|
|
A very popular open utility cleat manufactured in marine quality bronze. Basically a spring cleat for power boats or stern cleats for sail boats. The centre serves as a fairlead when necessary. Available in polished bronze or marine quality chrome plated finish. Sizes include 5", 6", 8", 10", 12" and 14". 10" Stainless Steel Cleat ios also available.
|
|
|
Our mooring cleats are manufactured from cast manganese bronze and are available in a polished or marine quality chrome plated finish. Four hole mounting on twin oval bases. Available in 6", 8", 10", 12" and 14" sizes.
|
|
MOORING CLEATS (MH4)
The Walcon twin-posted cast aluminium mooring cleat can be fitted to all standard units with a simple through- bolt connection. The assembly has been load-tested to 3 tonnes in line and 1 tonne laterally. Cleats on System 2000 walkways are fitted into a groove on the side extrusion and may be simply moved by sliding.
|
|
The cleat has an in-built pulley that offers a compact solution , for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is easy to release is required. The Sailor's preferred choice for adjusting trapeze lines.
Manufactured from aluminium for light weight and durable performance the CL253 is available in two finishes:
1. CL253 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL253AN has a hard anodised finish to give a hard wearing surface.
|
|
The red gate is flipped up by hand to keep the rope out of the alloy cleat and prevent unintentional entry of the rope into the cleat.
The CL237 is a modified CL201.
Also available in Aluminium - CL238.
For larger size ropes, look at the Nylon CL239 or Aluminium CL240.
|
|
|
These stern chocks are cast 316 stainless steel with a highly polished finish.
|
|
|
The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Available in silver or hard anodised finish.
|
|
|
These fairleads (or bow chocks) are cast in marine quality bronze and are available polished or chrome plated.
|
|
|
|
|
|
|
|
The combined advances in rope, materials and computer technology has called on all the resources of RWO engineers to meet the challenge and produce the most efficient cleat in the world. Unique teeth progression which has been scientifically tested to offer similar amounts of holding power on small or large rope diameters (Just try and use a smaller line for same application and hold it in your hand to get some idea of the grip required.) On older cam's just one or two teeth attempt to retain the rope which was OK for more forgiving old fashion softer rope, but now with the harder core Hi-tech rope higher loading under tension are resisting deformation. More teeth contact but at less depth means a kinder cleat to rope wear, easier entry and exit. The contoured cam shell is unlike other designs, it is not a compromise, the carbon fibre teeth form direct wedge to the pillar and transfer the load to the fastenings. The rest of the body is sculptured around this and whilst providing a distinct contrasting also forms part of a lubricated fluted bearing. Thus our engineers, together with computer and plastic experts have maximised the use of modern technics resulting in a world beating design.
|
|
|
|
