|
|
Cleats are used for setting mooring lines and making fast at a dock. Attwood cleats are available in a variety of styles that will accentuate the appearance of any vessel. Base your selection on these considerations:
Stainless Steel – Stainless-steel alloy cleats are guaranteed for life
ZAMAK – Corrosion-resistant Perma-Plate® chrome-plated finish
Other Material – Economical cleats that serve a variety of uses
|
|
Standard clutches can be tough to let off, especially under load. However, Holt Nautos has overcome this problem. Their patented 'Xtreme Release' hinged two-piece lever allows you to easily release the clutch, even under high loads. Having flipped up the handle from its secure clip, you then have maximum leverage to free the rope.
This makes the clutches ideal both for serious racers and for family cruisers - whether you're looking for the ability to blow a spinnaker halyard fast, or just trouble-free sailing with an inexperienced crew, the XR range fits the bill. Furthermore, each clutch prevents accidental release with its snap-shut lip - a superb safety feature for all sailing environments.
|
|
CL270 - Racing Micros with Becket
CL270AN - Racing Micros with Becket (Hard Anodised)
The becket holds the end of the rope under the cleat. No need for an extra fixing. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope.
Manufactured from aluminium for a light weight and durable performance the CL270 is available in two finishes:
1. CL270 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL270AN has a hard anodised finish to give a hard wearing surface.
|
|
CL268 - Racing Micros
CL268AN - Racing Micros (Hard Anodised)
Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Applications include Canoes (seat & rudder lines);
Dinghy control lines; Kitesurfing (5th line adjustment).
Manufactured from aluminium for a light weight and durable performance the CL268 is available in two finishes:
1. CL268 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL268AN has a hard anodised finish to give a hard wearing surface.
|
|
Allen cam cleats have had over 50 years of meticulous R&D to perfect their design. Available in either Alloy or Alanite* the jaw profile optimizes rope entry and exit for smooth cleating and uncleating, whilst double coil springs and ball bearing technology give consistent cam action. The addition of the ultra-prolead with optional wire reinforcement enhances cleating angles for superior performance and longevity.
*Alanite is a proprietary material developed by Allen specifically for high wear resistance, low weight and good heat dissipation. This carbon composite material is ideal for cam cleats.
For ultra-hardwaring applications you can’t beat the alloy series cam cleat for strength and durability without shredding your line.
|
|
ALUMINIUM CAM CLEATS:
Available in two sizes for lines up to 14mm. A well proven design extremely strong and rugged, finished in hard anodised satin finish. Bases and fairlead options are stainless steel.
BUDGET CAM CLEAT:
Of the same design as our 'K' Cam, this low cost range features cams moulded from glass-reinforced nylon in light grey. An inexpensive cleat ideal for light applications.
Line dimensions and applications are as for 'K' Cams. All 'K' Cam accessories are compatible.
|
|
Camcleats.
Two ranges of cleats suitable for control lines on all sizes of boats up to half ton racing. Maximum use has been made of Hi-tech marine grade materials to cater for modern rope line technology, and a complete choice of accessories are available including top, rear and front mounted fairleads, under deck fixings, angled and parallel bases. Rope guides or fairleads are made of stainless steel or plastic. Rounded to give a smooth entry, they either fit under or over the cleat and are secured by the existing screws.
|
|
Maximum Performance and Minimum Friction in Rutgersons new rope clutches.
The modern, compact design of Rutgersons new rope clutches ensures a neat mounting in line with modern deck layouts. But above all, the new streamlined design dramatically reduces the risk of problems with tangled ropes.The RC 750HP and 1000 have no sharp corners or obstructions to catch the rope.
The RC-clutches also makes the rope running through easier handle. This is because it is the only rope-clutch on the market fitted with an integrated low friction sheave which ensures that the rope runs smoothly - both when winching and when trimming by hand. Naturally, the clutch allows continued trimming of the rope even when it is locked.
|
|
Maximum Performance and Minimum Friction in Rutgersons new rope clutches.
The modern, compact design of Rutgersons new rope clutches ensures a neat mounting in line with modern deck layouts. But above all, the new streamlined design dramatically reduces the risk of problems with tangled ropes.The RC 750HP and 1000 have no sharp corners or obstructions to catch the rope.
The RC-clutches also makes the rope running through easier handle. This is because it is the only rope-clutch on the market fitted with an integrated low friction sheave which ensures that the rope runs smoothly - both when winching and when trimming by hand. Naturally, the clutch allows continued trimming of the rope even when it is locked.
|
|
A neat, compact alloy cleat.
Manufactured from aluminium for a light weight and durable performance the CL211 Mk2 is available in two finishes:
1. CL211 Mk2 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL211 Mk2AN has a hard anodised finish to give a hard wearing surface.
|
|
|
An elegant design in black or white nylon. The rope drops down into the teeth. Also available in Aluminium.
|
|
CL230 - Racing Junior MK1 with Roller
CL230 AN - Racing Junior MK1 with Roller (Hard Anodised)
CL230 can be rigged for adjusting a trapeze
|
|
With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release.
Manufactured from aluminium for light weight and durable performance.
It is available in a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and coastal conditions.
|
|
With the CL254 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Will hold very high loads when used with high quality ropes.
Manufactured from aluminium for light weight and durable performance the CL254 is available in two finishes:
1. CL254 has a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and coastal conditions.
2. CL254AN has a hard anodised finish to give the ultimate hard wearing surface. Excellent for extreme coastal conditions.
|
|
With the CL201 the rope drops down into the teeth to give a quick and positive lock that is easy to release.
The cleat is maufactured from UV resistant plastic, making it cost effective and ideal for holding rope in an outdoor enviroment. Its simple design has led to it being fitted on boats to farm equipment.
|
|
Clamcleat rope cleats now need little introduction. The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope which will automatically cleat under load. To release just jerk upwards.
There are now 3 basic models (i) original moulded nylon, (ii) racing aluminium silver coated, (iii) racing aluminium hard anodised.
The nylon models remain best value for where high loads or rope surge are not encountered.
|
|
With the CL205 the rope drops down into the teeth to give a quick, positive lock that is easy to release.
The cleat is maufactured from UV resistant plastic making it cost effective and ideal for holding rope in an outdoor enviroment. Its simple design has led to it being fitted on boats to farm equipment.
|
|
OPEN CLEATS:
A wide range of open [Horn] cleats mouded from tough high strength black nylon.
|
|
The cleat has an in-built pulley that offers a compact solution , for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is easy to release is required. The Sailor's preferred choice for adjusting trapeze lines.
Manufactured from aluminium for light weight and durable performance the CL253 is available in two finishes:
1. CL253 has a silver stove enamel finish for a cost effective, high quality coating.
2. CL253AN has a hard anodised finish to give a hard wearing surface.
|
|
|
Horn Cleats In five sizes, suitable for halyard control lines or mooring cleats for the range of ropes. Generous base area allows the cleat to be secured firmly.
|
|
MOORING CLEATS (MH4)
The Walcon twin-posted cast aluminium mooring cleat can be fitted to all standard units with a simple through- bolt connection. The assembly has been load-tested to 3 tonnes in line and 1 tonne laterally. Cleats on System 2000 walkways are fitted into a groove on the side extrusion and may be simply moved by sliding.
|
|
The red gate is flipped up by hand to keep the rope out of the alloy cleat and prevent unintentional entry of the rope into the cleat.
The CL237 is a modified CL201.
Also available in Aluminium - CL238.
For larger size ropes, look at the Nylon CL239 or Aluminium CL240.
|
|
FAIRLEADS:
Moulded from tough black nylon, these rope fairleads have a smooth snag free design and are supplied in handed pairs.
|
|
|
|