|
|
The Trim Tab Light, which has proved to be a popular aftermarket product, is built out of thermal polymer, which means it's completely corrosion-free. Designed to mount on top of your trim tabs, it is ideal for those people who don't want to drill a hole in their boat, or for small trailerable boats. The Trim Tab Light can also be mounted on an L Bracket for boats that don't have trim tabs.
Available in Ultra Blue, Ultra Green and Brilliant White, this product is recommended for boats up to 30 feet.
|
|
- Housing made from high Tec polymer
- Unique curved design
- Low DC power consumption.
- Draws less than 1.3 amps @ 12 volts DC
- Low heat emission
- Designed for in water applications
- 6 x long life high output LED’s
- No bonding required
- No corrosion (no metal under water)
- Pivot bracket for easy cleaning
- 5 metre (16.2 ft) tined underwater cable
- Available in Ultra Blue, Ultra Green and Brilliant white
- Fibre glass mounting post
- I-njection moulded class reinforced bracket
- S/S mounting pins
- 2 year warranty
- Australian designed and manufactured
|
|
Following on from the huge worldwide demand of the AQL 3 series, AQUALUMA releases the 6 series.
This new larger option has been designed in response to the large number of requests from the world's super yacht industry who have very quickly grasped the obvious advantages of the AQUALUMA products.
The AQL 6 series is available in the three colours Blue, White and Green.
The construction is the same as the proven AQL 3 series, corrosion proof, injection molded polycarbonate, internally driven and maintained.
What more can any boat owner want BUT the Tri Colour ...
|
|
Aqualuma 1 Series - The Aqualuma Advantage
-2 Unit Set.
-Master, Slave & Driver Set
-Wide angle elliptical beam 12° x 50°
-No Lens seal to leak
-Very low DC power consumption
-Draws less than 0.5 of an amp per light @ 12 volts
-Very low heat emission
-Can be operated out of the water
-Long life, high output LED light engine
-High impact resistant polycarbonate housing
-No bonding to anodes required (Housing cannot corrode)
-Light engine will accept 12 volt DC power source
-Serviceable from inside the boat
-Available in white, blue or green
-Cabling to suit your application : IP68 connectors Master to Slave, your loom to Master
-Ignition Protected
-5 year Warranty
-Australian designed and manufactured
-Easy install = low installation cost
-*Aqualuma Sealant Supplied
|
|
Description:
- Polished or Chrome Plated Bronze with Mounting Ring
- 10 Feet of 16/2 Electrical Cable
- Safety Seal Design Prevents Water Intrusion in the Event of Glass Breakage
- Terminal for Bonding Wire
- L.E.D.'s Provide Longer Life, Less Heat and 1/10th the Energy of Standard Lights
|
|
Deciding which Aqualuma product to purchase has just been made easier.
The Tri Colour range combines the brilliance of the 3 Series with the body of the 6 Series and offers customers the choice of two colours in the one housing.
There are three light combinations to choose from: select to operate either one of Aqualuma's famous light colours, or run them together and get a mix of the two with the intensity of the 6 Series (Ultra Blue and Brilliant White, Ultra Blue and Ultra Green or Ultra Green and Brilliant White).
Still manufactured in the same incredibly robust one piece corrosion proof, injection molded polymer housing, the Aqualuma Tri Colour gives awesome, colourful results with just the flick of a switch.
|
|
Model S 600: (Stainless Steel) flood wide angle illuminates up to * 30 feet around the transom area.
6 LED – 12 watt will draw only 1 Amp at 12 volts.
Large 100 degrees angle, 350 Lumens at 7200 Kelvin.
Diameter 3 1/8 (80 m/m) thickness 9/16 (15 m/m)
|
|
Model S 1515: (Bronze) Powerful 15 LED flood angle will illuminate up to * 100 feet.
15 LED – 36 watt, 90 degree beam angle.
Draw 3 Amp at 12 volts, 1610 Lumens at 8400 Kelvin.
Diameter 5 3/4 (146 MM) thickness 11/16 (27 MM)
The S 1515 is supplied with external power regulator
|
|
SCOUT OF HULL 6 LED 1w RED, VARI (angle 60°)
As an indication, a traditional halogenous bulb of 50-55 W replaces
6 LED of power
Scout of Hull with integrated driver
Detailed description:
Diameter: 90 mm
Thickness: 10 mm
Tension: 10 to 30 V AC OR cd. (system of regulation integrated)
Consumption: 6 W
Lighting: RED
Reference: 04HULL 6VARI RED
|
|
FishGLOW Underwater LED Lights for Boats
FishGLOW lights utilize the latest state of the art, high output, 12-volt, Light Emitting Diodes (LED's) as their source. The emerging LED technology allows for lower power consumption, improved reliability and increased longevity over conventional lighting. FishGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The curcuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount FishGLOW lights on the transom, at least 6-8 inches below the water line. Then pass the included 12' marine grade power cable from each light, through a small opening above the hull's water line or a suitable existing opening in the transom. FishGLOW lights connect to the included 20' power supply cable with a simple-to-use, color coded quick connect, which plug together in only one way.
|
|
DockGLOW lights are ideal for backyard docks, marinas, waterfront restaurants, sea walls, resorts, etc. They utilize the latest state of the art, high output, Light Emitting Diodes (LED's) as their source. DockGLOW LED's are designed to run off standard 110 Volt household current through the use of a UL certified power supply box. DockGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The circuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount DockGLOW lights on the pylon, at least 6-8 inches below the water line (below the low tide water line). Then run the included 30' marine grade power supply cable to the power supply junction box (included). The cable connectors offer a simple-to-use, quick connect, which plug together in only one way.
|
|
|
The UL Ti MATE 80 20 watt LED is available in 12 or 24 volt.
|
|
| ... products without information |
| |
|
|