|
|
LED Floodlights - Ultra reliable LED floodlights featuring ultra low power consumption (only 7W), suitable for applications subject to high vibration. This floodlight is completely sealed and pre-wired with 2m of marine cable and is the ideal 'fit and forget' unit.
UV and impact resistant plastic front housing. Die cast aluminium body. Clear glass lens. Completely sealed.
Multivolt 9-30V DC.
|
|
|
Lumitec's LED Cockpit Flood Light is a perfect replacement for dated, power hungry 55W Halogens. The company's proprietary light engine technology provides a wide even beam, without the hotspots or banding that cause eye fatigue. The smaller size (70% smaller than comparable lights) and lower draw (80% less power than a 55W Halogen) have made it a favorite among top-tier boat builders. The luminaire is completely sealed, IP 67 compliant and boasts an expected life of more than 30,000 hours. 10 to 30VDC, draws 900mA @ 12VDC.
|
|
|
Lumitec’s recently designed Cockpit Flood Light offers the same great light output as it predecessors with a stylish new appearance. Utilizing Lumitec’s proprietary light engine technology, it is a perfect replacement for 55W Halogens. The luminaire’s small size (70% smaller than comparable lights) and low power (80% less current draw than a 55W Halogen) have made it an ideal selection for many exterior locations. Completely sealed and IP 67 compliant, expected output life is more than 22,000 hours. Powder coated die cast aluminum housing is salt-spray tested to 3,000 hrs. 10 to 30VDC, draws 900mA @ 12VDC.
|
|
|
Lumitec’s new Maxillume flood light will change the way you think of LED illumination. Boasting the light output equivalent of a 200 to 300 Watt Halogen light, the light has already been selected by the US Government for installation in their coastal interdiction vessels. The solid aluminum housing is completely sealed and IP67 compliant. Best of all, the luminaire operates on 12 or 24V DC systems so there is no need to run the generator.
|
|
|
This light can be surface mounted in areas needing low level lighting for steps, walkways, doorways and for general lighting on smaller boats. The bolted bezel is machined stainless steel 316 L and ensures a strong exterior for exposed areas. It is available with a frosted lens. This light uses the best quality materials and is designed for longevity and tested for water tightness to IP65. DV26 is available in 12 volt LED cool white, warm white and blue.
|
|
|
The Flush Mount LED Cockpit Flood Light is a follow up to Lumitec%u2019s highly successful bracket mount LED flood light. Utilizing Lumitec%u2019s proprietary light engine technology, it is a perfect replacement for 55W Halogens. The luminaire%u2019s small size (70% smaller than comparable lights) and low power (80% less current draw than a 55W Halogen) have made it a favorite among top-tier boat builders. Completely sealed and IP 67 compliant, expected output life is more than 22,000 hours. Its powder coated die cast aluminum housing is salt-spray tested to 3,000 hrs. 10 to 30VDC, draws 900mA @ 12V.
|
|
Waterproof LED flush mount, surface mount, and bulkhead LED light.
Advantages include:
- Waterproof to IPX7
- Robust and non-corrosion design
- Optional lens colours including red and green
- Low profile
- Low power consumption (0.2 amps)
- Bright white wide angle LEDs
- Surface, bulkhead or flush mounted
- Flying tails
Applications including: commercial and leisure marine, vehicles, navigation lighting, kitchen cupboard lighting, and remote/independent power source systems.
|
|
|
Lumitec marries designer styling with rugged outdoor construction to offer their line of High Intensity Task/Cockpit Lights. The luminaires leverage Lumitec’s proprietary light engine technology, used in their high powered flood lights, to offer extreme brightness in a small package. Mounted for reading, tasks, or chart tables, users will appreciate the attractive designs and bright clean light. Used to illuminate cockpits and decks, the bright wide beam, waterproof construction, and weatherproof materials shine through. The proprietary mounting system offers full articulation, no metal to metal contact, and no exposed fasteners. 10 to 30VDC, draws 285mA @ 12V, 170mA @ 24V.
|
|
|
Versatile General Area Illumination Lights offer unprecedented flexibility. Like Lumitec’s Flush Mount Down Lights these luminaires are suitable for interior or exterior use, and come in 4 light output options. Compact, attractive and fully positionable, the lights shine a wide, even neutral-warm white beam, or choose colored light to suite your mood. Great for illuminating entertainment and living spaces, especially where conventional overhead lighting just isn’t possible. Intelligent circuitry enables advanced features like dimming and four-color control without external control modules or specialized switches. This allows builders to use existing SPST switches and eliminates the need for multiple wire runs for multi-colored lights. Light output options include 4-color (white/red/blue/purple), red / white with dimming, blue/white with dimming, and white only. Fully sealed, IP67 compliant for interior or exterior use. 10 to 30VDC, draws 220mA @ 12V, 110mA @ 24V.
|
|
Recessed LED downlight, emitting direct and concentrated light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
VERY LOW RECESS
MULTIVOLTAGE DRIVER ON BOARD
LIGHTING DETAILS:
PowerLED Warm White 3000°k or Natural White 3700°k
Cri: 93%
40 Lumen
Lighting Beam: 25°
ELECTRICAL DETAILS:
PowerLED 3W@10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct and concentrated light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k
Cri: 80%
170 Lumen
Lighting Beam: 50°
ELECTRICAL DETAILS:
PowerLED 6W@10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct light, suitable for any environment.
Antidazzling built-inrefl ector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k
Cri: 80%
ELECTRICAL DETAILS:
PowerLED 10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct and concentrated light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k or Natural White 3700°k
Cri: 97%
250 Lumen
Lighting Beam: 40°
ELECTRICAL DETAILS:
PowerLED 12W@20-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k
Cri: 80%
ELECTRICAL DETAILS:
PowerLED 10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct and concentrated light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k
Cri: 80%
140 Lumen
Lighting Beam: 40°
ELECTRICAL DETAILS:
PowerLED 6W@10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
Recessed LED downlight, emitting direct and concentrated light, suitable for any environment.
Antidazzling built-in reflector and circuits on board.
FOR INTERIORS AND EXTERIORS
PROTECTION GRADE IP65
MULTIVOLTAGE DRIVER ON BOARD
DIMMABLE THROUGH DIMMER CLL
LIGHTING DETAILS:
PowerLED Warm White 3000°k
Cri: 80%
170 Lumen
Lighting Beam: 50°
ELECTRICAL DETAILS:
PowerLED 6W@10-30Vdc
Installation 2 wires in parallel
Polarity reversal protected
|
|
|
Lumitec’s new flush mount down lights set a new standard in overhead lighting. The luminaires feature weatherproof construction suitable for interior or exterior installations, a shallow-depth profile (less than ½” below mounting surface), and an easy to install mounting system. Ideal for salons and staterooms, as well as helm stations, flybridges and hard tops, the lights are fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming and four-color control without external control modules or specialized switches. This allows boat owners to use any existing “on-off” switches and eliminates the need for multiple wire runs for multi-colored lights. Light output options include 4-color (white/red/blue/purple), red / white with dimming, blue/white with dimming, and white only. 10 to 30VDC, draws 220mA @ 12V, 110mA @ 24V.
|
|
Powerful recessed spotlights with reduced dimensions. They consist of an airtight lamp available either in white light (hot or cold) or RGB (colour-changer), on which to attach fittings that comes in various solutions that can also be custom designed on request.
Internal electronics with a power supply of 10 to 30 Vdc.
|
|
IP65 Halogen walkover light
Suitable for use in pathways, decking and soffits, etc.
Plastic mounting sleeve included for floor mounting
Lamp seated on spring for easy removal
Fitted with 0.5m of rubber cable
N.B. Cut-out dimension given is without mounting sleeve. Cut-out dimension when used with the mounting sleeve is 72mm
|
|
IP65 Halogen walkover light
Suitable for use in pathways, decking and soffits, etc.
Natural anodised aluminium finish
Multiple lamp options available
Plastic mounting sleeve included for floor mounting
Lamp seated on spring for easy removal
Fitted with 0.5m of rubber cable
LED lamps recommended due to cool operating temperature
AU-WU691/50 supplied with both MR16 and GU10 lampholders
N.B. Cut-out dimension shown is without mounting sleeve. Cut-out dimension when used with the mounting sleeve is 40mm
|
|
Recessed spotlights fitted with power-LEDs from 1.0 to 2.5W. Similar to the Minispots, they have an airtight body on which to attach a wide array of fittings.
The remarkable lighting intensity distributed at a 70° emission angle makes them ideal for lighting small areas or specific internal and external zones.
Also in this case the fitting can be custom designed. Internal electronics with a power supply from 10 to 30 Vdc.
|
|
The Fixed-Single 1 watt LED (60mm) (Ref. S40252-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B).
The front bezel is IP 68 and the rear part of the lamp is IP 44. Bezel diameter 60mm
One Driver (S41104) is required to power seven Fixed-Single 1 watt LED’s.
|
|
The Small Single LED Eyeball (Ref S40201-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C) and red (R), green (G) and blue (B).
The eyeball of the LED is adjustable.
One driver (S41104) is required to power a minimum of four and a maximum of seven 1 watt LED eyeballs.
|
|
The Single LED Eyeball (Ref. S40154-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B).
The front bezel is IP 68 and the rear part of the lamp is IP 44.
The eyeball of the LED can be adjustable.
One Driver (S41104) is required to power seven Single 1 watt LED eyeballs.
|
|
The Fixed-Single 1 watt LED (Ref. S40211-SS-*) with screwed 316 Stainless Steel polished bezel and 1 meter of cable.
The LED is available in two white colours, warm (W) or cool (C), and red (R), green (G) and blue (B)
The front bezel is IP 68 and the rear part of the lamp is IP 44.
One Driver (S41104) is required to power seven Single 1 watt LED’s.
|
|
| ... products without information |
| |
|
|
see the results for the following category :