|
|
A complete line of dedicated marine certified displays...
The Centric range consisting of 15.0, 19.0, 21.3 and 23.1 LCD displays primarily designed to withstand the harsh marine environments.
All the displays have been certified by an independent test house for boat and meet the stringent demands of marine & military specifications:
IEC 60945 Marine Communications
IEC 61174 ECDISΉ
IEC 60936 ARPAR RADARΉ
IEC 60529 IP Rating 66 & 67
IACS E10 For class approvals i.e. ABS, DNV, LRS
MIL 810-F Environmental
MIL 901D Hammer Test ²
Each display has the unique ability to accept either AC or DC supply.
The approved solution for your navigation and ships automation applications...
Notes:
1) Not applicable to 15.0" LCD Display
2) Applicable to 15.0" & 19.0" LCD Display only. |
|
Industry's largest display in the smallest chassis frame...
Nauticomp's Glass Bridge displays offer the largest display in the smallest housing, minimizing overall dimensions, enabling multiple displays to be mounted and maximizing available space. Glass Bridge Series range from 12.1" through to 21.3" in either Daylight or Sunlight readable variants.
Each display is fitted with interface circuits that allow it to be connected with up to ten (10) inputs ranging from RGB, VGA, DVI-I, S-Video, Component & Composite Video sources. The display can accept signals of lower resolution, such as VGA. These signals are scaled so that they are displayed full marine screen.
Along with conventional LCD brightness and contrast controls, the display has an advanced dynamic brightness dimming technique, permitting full brightness to "Dim to Red" selectable at any brightness which is typically employed during night-time operation at low backlight levels.
A unique but simple remote On Screen Display (OSD) user interface known as the GB Commander allows the user to adjust a wide variety of display parameters. Simultaneous control of backlight brightness for up to ten (10) Glass Bridge Displays can be achieved via one GB Commander.
All displays are designed for operation from an external regulated 12.4V DC supply.
Nauticomp offers a wide range of external power supplies to match the power consumption - 12V DC, 24V DC & 110/230V AC. |
|
The Ultimate in flat displays
Wide viewing angle from SVGA to SXGA. Light levels range from 200 nits up to 1800 nits and are anti glare. Fully Sunlight readable to Pilothouse brightness. Available in 8, 12, 15, 18, 20 and 23" sizes. All sizes available in Reverse Mount...No Buttons and No Bezel 9 inputs...4 VGA 4 Composite 1 DVI. Optional touch boat screen. Limited two-year warranty. Hand Made in the United States |
|
The 7000 Series manufactured in the USA in full compliance with International Regulations
- 3 sizes - 18", 20", 23"
- Brightness levels from 250-1000 nits
- Chemically hardened scratch proof glass
- Approvals, Certificates & Declarations of Conformity
- EN60945 (IEC60945)
- ABS- American Bureau of Shipping*
- DNV-Det Norske Veritas*
- LRS- Lloyd's Register of Shipping*
- BV- Bureau of Veritas*
- GL- Germanischer Lloyd*
- Hand Made in the United States
- Pending |
|
The DM Series Monitor - Designed with you in mind
On Marine screen Menu - user defined
No more scrolling through pages of unused sources
9 inputs, 4 VGA, 4 composite, 1 DVI
Scratchproof anti-glare glass
Available in Pilothouse, Daylight, Sunlight & SuperSunlight Brightness
Flexible and easy installation from the front!
Optional Touch screen
Cosmetic bezel available to match any helm color or design
Available in 12, 15, 17 and 20" sizes
Hand Made in the United States |
|
| The Reverse Mount Display is the only one of its kind in the marine electronics industry. It is installed from behind the helm with no bezel showing. Only the image on the boat screen shines through for a very sleek and understated look. The Ultimate in flat displays. Wide viewing angle from SVGA to SXGA. Light levels range from 200 nits up to 1800 nits and are anti glare and anti scratch. Pilothouse, Daylight, Sunlight and Super Sunlight Brightness. Available in 12, 15, 17, 18, 20 and 23" sizes. No Buttons and No Bezel. 9 inputs...4 VGA 4 Composite 1 DVI. Unlimited inputs through the VEI SSIR Optional touch screen. Limited two-year warranty. Hand Made in the United States |
|
| The Alpha 21 is an excellent choice for any pilothouse or flybridge installation and is perfect for radar, marine sonar, navigation systems for boats, marine video cameras, and marine computers. This high-clarity monitor provides easy viewing from virtualy any location and is the preferred choice for sunny conditions. If you need clarity, simplicity, elegance, and long-term reliability, choose AmbientNAV. |
|
The Alpha 17 is an excellent choice for any pilothouse or flybridge installation and is perfect for radar, marine sonar, navigation systems for boats, marine video cameras, and marine computers. This high-clarity monitor provides easy viewing from virtualy any location and is the preferred choice for sunny conditions. If you need clarity, simplicity, elegance, and long-term reliability,
choose AmbientNAV. |
|
Sunlight Readable, Fully Sealed & Fanless Operation...
Nauticomp's Signature displays recieved the prestigous Dame Certificate in marine electronics at the METS Amsterdam show in 2003. The sole certificate for marine electronics was awarded for the development of the Dim to Red (VGA Input) for night viewing.
The Signature Displays have the clearest image viewing in today's market with improved side anle viewing and come in 10.4", 12.1", 15.0" & 18.0" displays in either Daylight or Sunlight readable variants.
Only the finest components are used to give multiple resolutions, picture in picture (PIP) and VGA Dim to Red - RGB, DVI-D & Composite inputs.
The unique vewing panel for boats is encased in a rugged black powder coated preformed aluminium chassis. Nauticomp has designed the chassis to conform with your other instruments and to allow a larger display in your console landscape.
All displays are designed for operation from an external regulated 12.4V DC supply.
Nauticomp offers a wide range of external power supplies to match the power consumption - 12V DC, 24V DC & 110/230V AC.
Each Signature Display is shipped with a 3 year limited warranty 100% parts labour.
|
|
32" MM Series Glass Bridge Display
The largest marine monitor available on the market in the world. All glass front no external bezel. Available in 1,200 NIT Sunlight readable and 500 NIT Pilothouse versions. 9 inputs 4 VGA 4 Composite 1 DVI standard. Unlimited inputs using the VEI SSIR Controller for boats. 16 x 9 aspect ratio for true split boat screen operation. Waterproof when flush mounted. VEI Glare proof glass that cant be damaged by abrasive salt water or most harsh chemical marine cleaners. Innovative cooling system. 2 year warranty. |
|
VEI invented the Glass Bridge years ago. At VEI we go one step farther...VEI has a department dedicated to the fabrication of custom installations. We are able to design and manufacture the helm of your dreams. From idea to CAD drawing to fabrication our engineers will design an ergonomically perfect helm. You will receive an easy to install and easy to service state of the art masterpiece. We use only the finest marine grade aluminum - built to withstand the worst that the sea, saltwater and sun can throw at it.
We have the Glass Bridge integrated helm availble in all display sizes for any amount of displays with very short delivery times. Any of our Monitor sizes 8", 12", 15", 17", 20", 23 or 32" can be fitted into a GLASS BRIDGE HELM as shown on the included photo. The photo as seen has two VEI 17" displays joined together as one sleek unit. |
|
| This monitor is an excellent choice for any pilothouse or flybridge installation and is perfect for radar, boat sonar, marine navigation systems, marine video cameras, and marine computers. This high-clarity monitor provides easy viewing from virtualy any location and is the preferred choice for sunny conditions. If you need clarity, simplicity, elegance, and long-term reliability, choose AmbientNAV. |
|
| Designed for navigation tasks. With 1600 x 1200 pixels, this high resolution monitor features a 23 inch TFT-color display for optimal display of electronic marine nautical charts and RADAR images. The monitor is approved for ECDIS and RADAR certification and features antireflective glass without touch for ideal daylight readout and has an IP65 front and IP20 back. |
|
The FURUNO MU-120C/155C are multi-purpose displays that feature the unmatched Furuno quality and reliability that you have learned to depend on. These 12" and 15" color monitors feature a wide range of interface
capabilities that will accommodate virtually all of your marine display needs.
Characteristics
- Crystal clear 12" and 15" monitors for use as main or remote displays
- Sunlight viewable with wide viewing angle allows comfortable viewing by more than one person
- Built-in scaler allows monitors to accept up to SXGA (1280 x 1024) resolution
- Waterproof, low profile unit allows for flush mount installation even in an open fly bridge
- Wide range of inputs: 2 RGB analog, 1 Digital Video Interface (DVI) and 3 NTSC/PAL
- Unique programmable video input names
- PIP function allows for displaying two images on the boat screen at the same time
- Easily control display with standard infrared remote |
|
The FPM-64 series of LCD monitors is our most compact LCD monitor. But not short on performance! Packing 640 x 480 pixels into a 6.4" LCD along with 2 backlight marine lamps results in a extremely bright razor sharp picture.
The FPM-64 Series of displays are rugged conventional panel for boat mount design LCD monitors suitable industrial environments. Our pressed in stud design and a wide gasket area assure a tight seal to your control cabinet. The rear mounted boat screen controls eliminate tampering, and with AutoAdjust standard, screen setup is a one button procedure.
Our "No Name" Black bezel is perfect for OEM applications. If you need a special color or finish please ask, and Stainless Steel is also available. |
|
Replacing our immensely popular FPM-180 series of 18" LCDs. The New FPM-191 takes Performance, Reliability and Flexibility to a new level.
The completely redesigned FPM-191 is 100% drop in compatible to the FPM-180. But we have also set a new performance mark for the standard unit.. IED has been a leader in the industrial 18" market since 1997, having shipped thousands of units. We believe that our new 19" will be the absolute market leader.
Building on a solid foundation. We have added flexibility beyond our expectations. |
|
When you are looking for the simplest lowest cost Panel for boat mount LCD monitor, the LC series displays are your solution. Easy bolt in from the front mount.
A step up from the DM series the this LC-10 is the most basic of panel mount LCD monitors.. But incorporates a very high performance LCD so your screens for boats will look great! |
|
Thin and low cost. Designed for the start for OEMs looking for something better then a gutted plastic monitor without going to a High End industrial LCD.
And, when space is a premium the 1.5" installed depth helps! Still standard is our "No Name" bezel as always, special colors and finishes are always available, along with Stainless Steel. |
|
The DT-15 series displays are ground up designed for industrial applications and environments. Rugged 14 gauge steel chassis are designed to take the daily abuse and dusty dirty environments. The front bezel is finished with a non glare flat black while the case for boat is a semi gloss for easy cleaning. Our unique mounting is designed not to bounce during use of the Touch Boat screen, and will not move when subject to vibration and light impacts.
The base is a very sturdy 250" Thick Aluminum plate fitted with a closed cell foam non skid material that will not absorb liquids, and will not move when the touch screen is used. The base is predrilled so the unit can be permanently bolted down. A great feature when theft maybe a problem.
The DT-15 is standard with a very bright 450 nit high performance LCD with excellent viewing angel. |
|
Fitted with a water tight compression gland the ENC-154 unit is ready to go.. Bolt it to a wall or machine and cable it up.. IED stocks cables for boats to 50 Feet so most applications are covered.. With a 3B vertical grain.. it is perfect for food and pharmaceutical installations.
New features include a No Intervention SetUp.. On power up the unit adjusts itself to your computer for boats providing you the ultimate on Plug and Play, and our new(er) slim chassis design.. only 3" deep. This design along with our "No Name" policy is perfect for OEM customers.
And, Standard Black Aluminum screens for boats look great too and can save a lot of cost if Stainless is no necessary. |
|
We have a complete line of displays ideal for ITC marine computers. These displays can be also used in other computers and devices.
Our displays are built exclusively for iTmove according our specifications by the leading high bright display manufcaturer. We also offer a 'Smart' power supply that works with existing unregulated 12 volt DC electrical systems. Some of our computer models have a 12 volt regulated output that can be used to power the LCD panel for boats monitor.
Our high bright displays use VHB (very high bright) technology with a high power backlight that provides more than 1000 nits of brightness. Most monitors from our competitors uses transreflective technology. This technology is not true high bright (see our article that explains the differences here). |
|
Panel for boats IPC with 17" TFT display without touch, shock-absorbing HDD 40 GB hard disk and fanless CPU technology for use in demanding industrial environments, the EPC T170 comes with Windows for boats XP Professional Multilingual operating system.
Antireflective
With 1280 x 1024 pixels, this high resolution 17 inch TFT-display monitor features antireflective glass for ideal daylight readout.
Flexible use and upgrade
Numerous communication ports and two built-in PCI expansion slot provide flexibility in your application and enables easy updating as well as data storage. The modular construction of the EPC means you can upgrade your marine screen without any major obstacles. |
|
Panel for boat IPC with 15" TFT touch display, shock-absorbing HDD 40 GB hard disk with fanless CPU technology for use in demanding industrial environments, the EPC T150 comes with Boat windows XP Professional Multilingual operating system.
Flexible use and upgrade
Numerous communication ports and two built-in PCI expansion slots provide flexibility in your application and enables easy updating as well as data storage. The modular construction of the EPC means you can upgrade your marine screen without any major obstacles. |
|
Replacing our immensely popular FPM-180 series of 18" LCDs. The New FPM-190 takes Performance, Reliability and Flexibility to a new level.
The completely redesigned FPM-190 is 100% drop in compatible to the FPM-180.. But we have also set a new performance mark for the standard unit.. IED has been a leader in the industrial 18" market since 1997, having shipped thousands of units. We believe that our new 19" is the price / performance value leader.
Building on a solid foundation. We have added flexibility beyond our expectations. |
|
We have a complete line of displays ideal for ITC marine computers. These displays can be also used in other computers and devices.
Our displays are built exclusively for iTmove according our specifications by the leading high bright display manufcaturer. We also offer a 'Smart' power supply that works with existing unregulated 12 volt DC electrical systems. Some of our computer models have a 12 volt regulated output that can be used to power the LCD panel for boats monitor.
Our high bright displays use VHB (very high bright) technology with a high power backlight that provides more than 1000 nits of brightness. Most monitors from our competitors uses transreflective technology. This technology is not true high bright (see our article that explains the differences here). |
|
| ... products without information |
| |
... see all the products in the category
Screens
|
This range of TV/DVD digital-reception marine combos features specially treated electronic cards and shock-proof reading mechanisms. 15 to 19 (38 to 48 cm) high resolution screens for boats :
to enjoy "yacht-style" entertainment on board for boats while decking or during
a long passage ! Compact and mobile, those combos can be easily transferred from home to boat. Equipped with a PC input, they can also operate as lap-top monitors.
Digital & analogue television with 15 (38 cm) DVD/CD
Extra-slim and compact.
Integrates a bi-function Digital & Analogue Tuner + a DVD player.
No additional marine equipment needed to sailboat watch your favourite DVD !
TV features
Digital & Analogue tuner.
Multilingual menu (ENGL, FR, IT, GER, SPAN, DUTCH).
Canals RDS.
1000 x Terrestrial canals. 100 + analogue AV.
DVD features
DVD player - Divx - MMEG4 - CD - SVCD - MPEG3.
Common features
Display type : 15 (38 cm) LCD with TFT active-matrix.
Resolution : XVGA 1024 x 768.
Viewing angle : 165° horiz./125° vert.
Brightness : 300 cd/m2, contrast 500 :1.
Power : DC 12/24 V with 10 to 28 V - AC 230 V regulation.
Protection against polarity inversion.
Consumption : min.19 W - max. 28 W -12 VDC.
NICAM stereo sound system : 2 x 3 W, hp in front.
AV connections : RCA/TV/PC.
Connections : TV antenna/head-set socket/VGA.
Dimensions : 355 x 320 x 60 mm (L x H x depth).
Weight : 3.7 kg.
Supplied with
Remote control.
Detachable bracket/carry handle, complying with VESA100 regulation.
Cigarette-lighter cable + power cable. |
|
The high-end voltmeter with LCD display NAVYLEC can measure the voltage of one or more independent boat batteries in the form of light and use the EL Electroluminescent lighting for boats technology for his serigraphy and the LCD display back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm for boats when it is activated.
LCD precision voltmeter's with electroluminescent back lighting
12 or 24V
Running on circuits 12V or 24V without adjustment to do.
Electroluminescent EL lighting of the serigraphy and LCD display.
The LCD boat screen display makes reading instant of the battery voltage measured on four-digit.
Display of EL on serigraphy can be command separately (wi | | |
