|
|
Roodberg Launch & Recovery Slipway Trailer from 4 to 130 tons, pulled or self-propelled.
The most Cost-effective solution to Recover and Launch yachts from the water by means of slipway and transport them through your yard.
Over 30 years of experience with this concept. Ask Roodberg for the most suitable model!
|
|
Photo: Amphibious Tower Trailer 15 M.T. capacity
Amphibian towed trailer, equipped with an Open/Closed hydraulic system already described. All movements are hydraulically controlled. It only needs a normal tractor for towing and feeding the necessary hydraulic power to the trailer system.
|
|
|
|
|
|
|
When it comes to superior manoeuvrability and efficient handling, there are no alternatives! Con-o-lift self-propelled marine hydraulic trailers deliver the ultimate in boat-handling convenience and performance.
Our exclusive 180 degree steering system provides unparalleled maneouvrability in tight quarters, allowing for increased vessel storage in yards where space is at a premium.
These trailers feature all the benefits of our standard yard trailers, including our clean, open-frame design concept, and hydraulic expanding-width frame, combined with our extended frame lift system for independent hydraulic height adjustment. Con-o-lift self-propelled trailers feature a full hydrostatic drive system, with dynamic braking and a multi wet-disk parking brake for added safety.
The operator's station with full engine instrumentation is mounted on the integral tractor unit at the front of the trailer. An optional hydraulic-operated raised platform can be added for greater clearance when the unit is used for launch and retrieval on ramps.
|
|
|
|
|
|
|
When it comes to superior manoeuvrability and efficient handling, there are no alternatives! Con-o-lift self-propelled marine hydraulic trailers deliver the ultimate in boat-handling convenience and performance.
Our exclusive 180 degree steering system provides unparalleled maneouvrability in tight quarters, allowing for increased vessel storage in yards where space is at a premium.
These trailers feature all the benefits of our standard yard trailers, including our clean, open-frame design concept, and hydraulic expanding-width frame, combined with our extended frame lift system for independent hydraulic height adjustment. Con-o-lift self-propelled trailers feature a full hydrostatic drive system, with dynamic braking and a multi wet-disk parking brake for added safety.
The operator's station with full engine instrumentation is mounted on the integral tractor unit at the front of the trailer. An optional hydraulic-operated raised platform can be added for greater clearance when the unit is used for launch and retrieval on ramps.
|
|
This platform for careenage PARKNET allows the shoring up and the stowing of boats in complete safety while leaving free acces to the careen for maintenance purpose
Carreenage becomes easy, quick and safe. Offering the possibility to limit water splashing, capture the washing effluents and treat them.
|
|
|
A modular concept by half cradles for outside long time storage or for workshops use, a shoring up system simple, quick, sure and tested.
|
|
|
The originality of the system is based on an hydraulic semi-tracted truck allowing drying up and shoring up of a boat by only one worker, without any other system or toolkit
|
|
|
|
|
|
|
This new SW - 3 ton trailer offers an inexpensive means of hauling and launching smaller powerboats. It is also designed to work with a fork lift so for yards that already have a slipway, and want to install dry stack storage, offers this trailer provides an inexpensive and cost effective solution that allows a yard to use a forklift without negative lift. We also offer a version with 7 ton capacity.
Standard Technical specification's
Frame, open U-designed frame built with High Grade S355 Steel
Wheels, 2 each side pneumatic
Hydraulic cylinders, high quality cylinders with safety valves built-in.
The Hydrotrans SW series is built according to CE-regulations and is tested at the factory before shipment.
All Hydrotrans equipment comes with a five year warranty
The SW series trailers are available up to 60 ton's. Larger capacity's on request.
Contact us for additional information or a free quotation.
Hydrotrans has been engineering and building boat and material handling equipment since 1996. The standard models are the G2 (2 wheel steer-able) and G4 (4 wheel steer-able) yard transporters, the SW series for slipways, the RM series for remote control and the Aqua-Terra series of cranes. A wide range of custom designs can also be provided to suit individual requirements.
All Hydrotrans equipment is built to CE norms and is tested at the factory before shipment.
For additional information contact:
Hydrotrans B.V.
Hesselterlandweg 6
7942 HZ Meppel
Tel: +31.522.242112
Fax: +31.522.242116
Mobile: +33 (0)6.33.90.77.10
|
|
|
|
|
|
|
The SW15 hydraulic trailer is designed to launch and recover boats on a slipway, transport and park them in a storage or work area. The SW15 can be pulled by a reach truck or an agricultural tractor. Using the hydraulic capacity of the tow vehicle for all the hydraulic functions, the boat is lifted by 2, or an optional 4 hydraulic or mechanical pads. The width of the trailer frame and the height are adjustable. The pads and drawbar are manually or hydraulically adjustable. The front of the boat is supported by the crossbeam. For sailboats or multihulls, an adaptor is available. The Hydrotrans SW15 is also suitable for transporting boats on T-cradle’s. The SW15 offers optimal security through any terrain capable of supporting the load.
Technical specifications
High Grade S355 Steel
Capacity, 15.000 kg
Frame, open U-designed frame with adjustable width, height and length.
Wheels, 4 pneumatic or 4 solid tires.
Drawbar, 1,0 mtr. extendable.
Pads, 2 polyurethane pads 930x320 mm.
Hydraulic cylinders, high quality cylinders with safety valves.
Paint system, 2 coats epoxy primer and 1 coat 2 component topcoat, RAL 9001.
Standard Dimensions (call for options):
Height on pads, 750 mm.
Height on front, 430 mm.
Distance between centre of pads, 1200-2000.
Lifting height frame, 700 mm.
Lifting height pads, 400 mm.
The Hydrotrans SW series is built according to CE-regulations and tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Lease to purchase options are available.
Contact us for additional information or a free quotation.
|
|
|
|
|
|
|
The SW 50 is designed to launch and recover boats on a slipway, and park them in storage or repair area. The SW50 is towed by a reach truck or an agricultural tractor which supplies hydraulic power. The boat is lifted by 6 hydraulic pads. The front of the boat is supported by the crossbeam. For sailboats an adaptor is available. The width of the trailer frame and the height are adjustable as are the pads and drawbar. Many options, such as hydraulically extendable drawbar, and frame, are also available. Solid tires offer optimal security over any terrain capable of supporting the load.
Technical specifications
High Grade S355 Steel
Capacity, 50.000 kg
Frame, open U-designed frame with adjustable width, height and length.
Wheels, 16 solid tires.
Drawbar, 2,0 meter. Extendable.
Pads, 6 polyurethane pads 930x320 mm.
Hydraulic cylinders, high quality cylinders with safety valves
Paint system, 2 coats epoxy primer and 1 coat 2 component topcoat, RAL 9001.
Dimensions
Height on pads, 765 mm.
Height on front, 385 mm.
Distance between center of pads, 1420-2820.
Lifting height frame, 500 mm.
Lifting height pads, 400 mm.
All Hydrotrans equipment is built according to CE-regulations and tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Lease to purchase options are available
Hydrotrans has been supplying boat and material handling equipment since 1996. A wide range of custom designs can also be provided to suit individual requirements.
Contact us for additional information or a free quotation.
|
|
Adjustable inside clear width feature as standard
Allows the hoist to have a duplicate role of both recovery/launch and boat parking function
Stainless steel piping, hydraulic couplings and fittings to 316 Marine Standard
Stainless steel shafts throughout
Anti-flip hitch to prevent vertical jack-knifing
Can be supplied to suit a variety of towing vehicles
|
|
| ... products without information |
| |
|
|
