|
|
The right choice of flying line is essential if you want to get the maximum performance from your kite.
Flexifoil Flying Lines are made from hi-grade Dyneema® using the most modern construction techniques. This is combined with a sophisticated extreme pre-stretching process to give you the best performance and lowest stretch. In addition a highly UV-resistant coating helps to reduce friction and prolong life and aids to lower water absorption.
The optimised construction of Flexifoil Flying Lines ensures the best strength-to-weight ratio with minimum aerodynamic drag. Each Flexifoil line set is colour coded for safety and ease of use.
Key Features
» Colour coded line for easy left/right and brake line identification
» Extra long sewn sleeved end loops for easy line attachment
» Line length and strength printed on tabs. Pull tab to easily undo larks head knot. |
|
Locating pins, not to reverse the fronts and the backs
Lines coloured to differentiate the lines left, right-hand side, fronts and life line |
|
| ... products without information |
| |
| Designed for the serious sailor who wants the best. Easy in-flight adjustments, 12 inch plus range, pre-length setting, anodized cleats, durable/stiff self-positioning tubing loop, replaceable rope, easy to grab adjustment handle. |
|
Ezzy Harness Lines - $19.00
Sizes: 16", 18", 20", 22", 24"
|
|
The Quiktune lines are based around a simple V-jam line cleat. They are supplied with Marlow line and high durometer, durable urethane tubing sleeves. The unique V-jam cleat resists fouling by sand, grit and salt for a secure hold and quick adjustment.
Long arms? Short arms? Waist harness? Seat harness? No problem! Quiktune lines are supplied in a generous 24" to 30" configuration, but can easily shorten by trimming the tubing and shifting the stopper knots to what ever min. & max. length you desire |
|
| ... products without information |
| |
| ... products without information |
| |
Fendequip Rope ‘Anti Chafe’ Covers
Specially designed to fit any size of rope or line, Fendequip Rope Covers are made from the same premium quality soft loop fabric as our Fendercovers. With a full-length Velcro fastening, they are quick and easy to fit, non-absorbent, quick drying and stain resistant. Available in standard 1-meter lengths.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order.
Part of the Fendequip range of marine accessories. |
|
| Protects dock lines against chafing and eliminates that squeaking noise from dock lines rubbing against the boat. Made with super tough "Ultra-V-Tex", a soft but abrasion resistant polyester fabric. Easy to install Velcro fasteners keeps guards in place. They won't ride up! Fits lines from 3/8" to 3/4". (includes two chafe guards) |
|
| ... products without information |
| |
... see all the products in the category
Covers
|
| ... products without information |
| |
Capitani offers a wide range of bed sets, available single, double or king size, that may be completed with matching duvet covers.
All sets may be personalized embroidering the name of the boat and may be made to measure, choosing colours and finishings.
They are made of quality natural fibres as cotton, satin, linen and silk.
For any further information, please visit our website. |
|
| ... products without information |
| |
QL In-Line blowers provide ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high outputoperation, these blowers features front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, QL In-Line blowers provide higher air flow, lower amp draw and quieter operation than standard blowers.
The QL In-Line blower is designed for easy installation. It may be positioned anywhere along the length of ducting leading to the area being ventilated. The blower may be secured to any solid, flat mounting surface and oriented in any direction. NB. For maximum motor protection, it is best to mount the blower where it will not be exposed to moisture from spray or deck wash and slightly inclined so any moisture will drain back to the lower end of the duct run. |
|
Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors.
- Nickel-plated motor can for corrosion resistance
- Stiffening ribs to reduce housing distortion
- Motor cap to seal wires and motor for water resistance |
|
| ... products without information |
| |
|
|
see the results for the following category
