|
|
RECYtherm: RECYtherm is a high volume fleece for thermal and sound insulation of complete hulls. The surface, a PE-foil with aluminum cover, acts as a vapor barrier. RECYtherm is also suitable as sound-insulation material for smaller engines.
RECYguard: By combining RECYtherm with a heavy foil (2mm thickness and 3,7 kg/m² weight) the engine noise is also eliminated at the lower frequency band (vibrations). An additional thin fleece between heavy foil and wall makes sure that vibrations are not transferred to the hull.
RECYcombi: For big engines (500 hp and more) we recommend our product RECYcombi. This product has the same base as RECYguard but the top layer is an 3-D shaped pressed polyester-fleece. The shape of a honeycomb leads to a diffuse reflection of the sound and the additional fleece layer provides better absorption of the vibrations. Furthermore the high-value look of the surface gives big engine rooms a very nice appearance.
|
|
RECYtherm: RECYtherm is a high volume fleece for thermal and sound insulation of complete hulls. The surface, a PE-foil with aluminum cover, acts as a vapor barrier. RECYtherm is also suitable as sound-insulation material for smaller engines.
RECYguard: By combining RECYtherm with a heavy foil (2mm thickness and 3,7 kg/m² weight) the engine noise is also eliminated at the lower frequency band (vibrations). An additional thin fleece between heavy foil and wall makes sure that vibrations are not transferred to the hull.
RECYcombi: For big engines (500 hp and more) we recommend our product RECYcombi. This product has the same base as RECYguard but the top layer is an 3-D shaped pressed polyester-fleece. The shape of a honeycomb leads to a diffuse reflection of the sound and the additional fleece layer provides better absorption of the vibrations. Furthermore the high-value look of the surface gives big engine rooms a very nice appearance.
|
|
QL sound absorbent panels effectively muffle engine noise. The insulation pa-nels have a density of 100 kg/m3, which is just the right weight to absorb marine
engine noise frequencies and noise levels.
They are made of recycled foam, which has a combination of weight and po-rosity that both insulates and absorbs. Two types are available, self-adhesive or non-adhesive.
QL sound absorbent panels meet the fire safety requirements for CE marking. The insulation material is protected by an oil-resistant film that is easy to clean. The foam plastic is impregnated to make it self-extinguishing, and to withstand a max. temperature of 200° C (390°F).
The insulation is sold in rectangular pa-nels: 500 x 1000 mm (20 x 40”), which are easy to transport and to apply. They are available in three thicknesses, 20, 30 and 50 mm, and can easily be cut to shape with a sharp knife.
It is important to fit the panels tightly together, using adhesive tape to seal the joints to prevent noise leakage, or pene-tration of water, which could be absor-bed by the material."
|
|
RECYtherm: RECYtherm is a high volume fleece for thermal and sound insulation of complete hulls. The surface, a PE-foil with aluminum cover, acts as a vapor barrier. RECYtherm is also suitable as sound-insulation material for smaller engines.
RECYguard: By combining RECYtherm with a heavy foil (2mm thickness and 3,7 kg/m² weight) the engine noise is also eliminated at the lower frequency band (vibrations). An additional thin fleece between heavy foil and wall makes sure that vibrations are not transferred to the hull.
RECYcombi: For big engines (500 hp and more) we recommend our product RECYcombi. This product has the same base as RECYguard but the top layer is an 3-D shaped pressed polyester-fleece. The shape of a honeycomb leads to a diffuse reflection of the sound and the additional fleece layer provides better absorption of the vibrations. Furthermore the high-value look of the surface gives big engine rooms a very nice appearance.
|
|
Aplication:
tank-insulation, engine rooms, generator-boxes
Purpose:
reduction of structure borne noise with the help of heavy foil in combination with a fleece
Properties:
heavy foil with high specific weight (1850 gr/m³)
high range of temperature ( - 40 bis + 80° C)
high quality appearance with aluminum foil cover
Make-up:
rolled
width: 1500 mm
thickness: standard 5,5 mm (other thicknesses on request)
Options:
cut parts
wide range of different surfaces (PE-foil with Aluminum cover, glass-fibre woven, textile, etc.)
selfadhesive backing*
|
|
Cross-linked polyurethane of low thermal values designed to be used as thermal insolation.
Used as thermal insolation.
Actually is the lowest value you could find in the market (0,24 mW/mk).
Available densities of 35 and 45 kg./m³.
Thickness since 4 mm. until 200 mm.
Possible presentations in plain sheets, double or simple contour, scrim, etc.
Easy to handle with the common tools in each form you need.
Compact and uniform surface.
Lighter and high resistant.
Aplications in cool chambers and vans, gas storage, civil construction, etc.
|
|
PROMAGUARD from Soundown is a new concept in passive fire protection applying
microporous insulation technology. Thanks to its exclusive engineered mineral matrix, PROMAGUARD features unique benefits and provides many direct advantages with weight savings of up to 3 times lower than conventional solutions and materials making the panels ideal for applications on high
speed vessels. PROMAGUARD has been designed to meet SOLAS, IMO & MCA standards for passive fire protection. PROMAGUARD is the Solution for all insulating
and fire protection systems for bulkheads and deckheads on aluminum, GRP and steel structures requiring both extremely lightweight and thin insulation.
PROMAGUARD provides the lowest conductivity compared to conventional materials, as illustrated in the graphic. As a result, 10mm of PROMAGUARD
provides the same heat loss and insulation as approximately 50mm of
fibrous materials (depending on density and temperature). At 2.4Kg/m2, 10mm-thick PROMAGUARD provides the lightest possible weight panel as part of an A60
class fire rated system. |
|
QuietPro is a light weight, water resistant, sound and energy absorbing panel system. It has principal uses as an acoustic liner within air inlet trunks and other sea water exposed (occasional splash wetting) areas. It is also used
as an energy absorbing treatment to dampen sound and vibration on thin panels, and as a light weight thermal treatment that does not absorb condensation.
This product is made of expanded polypropylene pellets formed into rigid boards. The technology is based on recent developments related to energy absorbing plastics used for automobile crash protection. The material exhibits high chemical and moisture resistance derived from the special chemistry of
the polypropylene resin. These chemistry modifications also enhance its
unique sound absorption and damping properties. The material is molded using a process of expanding polypropylene beads with hollow cavities. The expanded beads are non-porous, but the hollow cores and cracks between adjacent beads
allow sound into a labrynth-like path where energy is absorbed. The hydrophobic nature of QuietPro allows sound absorption from a material that holds much less water than fiber based acoustic materials. |
|
SOUNDOWN’S Mass Loaded Vinyl Barrier (Tuff Mass®) is available in 1/2, 1, 1-1/2, and 2 lb/ft2 densities. It is a rugged all-purpose sheet barrier with a wide range of uses. Our Mass Loaded Vinyl is supplied in a standard 54" and 48" width and variable roll lengths from 10' to 250' depending upon material configuration. Soundown Acoustic Lead Barrier is available in weights of 1 and 2 lb. This traditional incombustible barrier material is supplied in a standard 48" width, and rolls of 12', 24', or longer as required.
|
|
| Acoustiply panels are made with a cork rubber core composition especially formulated to reduce sound and vibration is areas that are near the engine room, sub-floors, sub-decks, dividers, entertainment areas, etc. Our core material is sandwiched between marine grade plywood made to BS1088 requirements. |
|
| Acoustiply panels are made with a cork rubber core composition especially formulated to reduce sound and vibration is areas that are near the engine room, sub-floors, sub-decks, dividers, entertainment areas, etc. Our core material is sandwiched between marine grade plywood made to BS1088 requirements. |
|
| PVC foam is a closed, inert gas filled, cellular structure. It is produced in a range of densities and thicknesses to meet required specifications. It is available as plain sheet, perforated or scored, as contour-able, scored, or scrim backed, and as custom planks. It is also available These panels are also available in 1/8—5” (3-130mm) x 4’ x 8’ (2440 x 1220mm) up to 5’ x 10’ (3050 x 1530mm). These panels are also available laminated with FRP (Fiberglass Reinforced Plastic), HPL (High Pressure Laminates), marine plywood and/or decorative wood veneers. |
|
| Honeycomb panels provide excellent structural performance and are extremely lightweight. Honeycomb can be produced in your option of nomex, plastic and carbon and aluminum. These panels are also available in 1/8—5” (3-130mm) x 4’ x 8’ (2440 x 1220mm) up to 5’ x 10’ (3050 x 1530mm). These panels are also available laminated with FRP (Fiberglass Reinforced Plastic), HPL (High Pressure Laminates), marine plywood and/or decorative wood veneers increasing the mechanical properties of the core by stabilizing the cell walls and increasing thermal and acoustic insulation properties. The size and thickness are controlled to excellent tolerances. |
|
| ... products without information |
| |
|
|
see the results for the following category
