|
|
|
|
|
|
|
Installed and ready to use in 30 minutes!
Gobius is the first level indicator in the world that measures from the outside. Installing Gobius to your tank is very easy. Instead of the traditional way of installation, i.e taking the tank apart and drilling holes, you simply attach the sensors to the tank on the outside.
All Gobius products measure from the outside
Very easy to install and setup
Suitable for all tank materials; stainless steel/steel, aluminum, plastic and fibre glass
Gobius can be retro-fitted to any shape or size of a tank
Analouge output for gauges from Wema, VDO, Faria, Teleflex, Phillipi…
Supports NMEA 2000
Extremely low electricity consumption, less than 40 mA (12 Volts)
Support 12 – 24 Volts
30 minutes to install
On the sensor there is a disc of tape that is provided to attach the sensor directly onto the surface of your tank. The panel may be placed in the washroom. All necessary cables and plugs needed to connect the sensors and the panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds.
The Gobius technology (patented)
Each sensor that is placed onto the tank wall consists of a shaker and an accelerator. When the shaker creates a vibration in the tank wall, the accelerator measures the size of the vibration and passes the data on to the control unit.
Art No 970497
|
|
|
|
|
|
|
Installed and ready to use in 30 minutes!
Gobius is the first level indicator in the world that measures from the outside. Installing Gobius to your tank is very easy. Instead of the traditional way of installation, i.e taking the tank apart and drilling holes, you simply attach the sensors to the tank on the outside.
All Gobius products measure from the outside
Very easy to install and setup
Suitable for all tank materials; stainless steel/steel, aluminum, plastic and fibre glass
Gobius can be retro-fitted to any shape or size of a tank
Analouge output for gauges from Wema, VDO, Faria, Teleflex, Phillipi…
Supports NMEA 2000
Extremely low electricity consumption, less than 40 mA (12 Volts)
Support 12 – 24 Volts
30 minutes to install
On the sensor there is a disc of tape that is provided to attach the sensor directly onto the surface of your tank. The panel may be placed in the washroom. All necessary cables and plugs needed to connect the sensors and the panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds.
The Gobius technology (patented)
Each sensor that is placed onto the tank wall consists of a shaker and an accelerator. When the shaker creates a vibration in the tank wall, the accelerator measures the size of the vibration and passes the data on to the control unit.
Art No 970459
|
|
Continuously monitors 3 levels of holding and water tanks and monitors battery level. Includes rocker switch for pump if needed. Suitable for tanks up to 26" tall. Optional grey water tank sensor available.
- Easy to Install
The Smart Sense System is attached to the outside of the tank as shown.
- Reliable
No micro float switches or probes to degrade and fail. Electronic sensors are outside the tank
- Attractive and User Friendly
Smart Sense System includes a display panel with LED lights and hidden mounting screws inside snap out mounting bezel.
|
|
|
|
|
|
|
SENDER LEVEL WITH ALARM 4-20 MA. SIZE 10 TO 100 CM
Codice prodotto: HP--G00XX4-20
INTERNATIONAL PATENT.
Our new capacitive level sensor provides measurement accuracy, reliability and quality. It was designed to respond to the request of a sensor accurate, durable, universal and easy to use. The following features will reflect the advantages:
- The capacitive level sensor is compatible with all 4-20 mA gauges on the market. It is not compatible with STD (240/33 Ohm) and VDO type (10/280 ohms) gauges.
- It can be connected, properly powered, to the gauge replacing any other existing 4-20 mA sensor, with no special precautions needed.
- It is equipped with an exit alarm that may be audible or visible, and is programmed to 20% (for %u2018empty%u2019 alarm) or 80% (for %u2018full%u2019 alarm).
Capacitive level sensors can be used for FUEL, WATER and WASTE WATERS.
The capacitive sensor is currently produced with lengths ranging from 10cm to 100cm.
The %u2018Reed%u2019 level sensor is universal and therefore can be used for all liquids (white waters, black waters, fuel). The capacitive sensor instead exploits the properties of the liquid the level of which is to be measured and therefore has a structure created on purpose for the liquid of interest. In particular, we produce two types of capacitive level sensors, one concerning the fuel sector and one concerning the white waters and black waters%u2019 sector (for measuring the water level the sensor is then the same but has two different types of alarms %u2013 %u2018empty%u2019 for white waters or %u2018full%u2019 for black waters).
|
|
Codice prodotto: HPYXXXXX/HPWXXXXX
Our liquid level senders are level indicating devices compatible with all the petrol and water level gauges available on the market.
They are fuel, sea-water and acid resistant because they are made of the highest stainless steel AISI 316. They are perfectly watertight and have a flange with holes that allows a perfect fitting on the tank.
The sender cables must be connected to the measuring terminals of the indicating instruments, as explained in the user's manuals of the later.
The level indicating gauges available on the market can be divided into two main categories:
1) standard gauges (STD)
2) inverted gauges (VDO-type)
|
|
|
You can now monitor and control up to 8 tanks of any shape or construction. You can see how much is in each tank, pump out each tank, automatically start a watermaker when water levels are low, and automatically turn off watermakers whaen tanks are full. You can be alarmed when fuel is low, deactivate toilets when black tanks are full. The very Smart TC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight tanks. The system consists of the TC-8000 display controller (as seen above) up to eight HT-100 or HT-100/P tank controllers to control each tank, and any number of optional RD-800 repeater displays communicating via a 2-wire network cable with a maximum cable length of 1000 meters. This means you can have the main display at the helm and another display in the bedroom or second helm station. Control the fuel, water, grey and black tanks so you never run out of water or fuel again.
|
|
|
|
|
|
|
CAPACITIVE SENDER
Codice prodotto: HPCHDS/ HPCHDV / HPCHG /
INTERNATIONAL PATENT.
Our new capacitive level sender offers precision of measurement, reliability and quality that are
always sought after and appreciated by the end-users. They were designed to meet the demand
for a precise, durable, universal and user-friendly sending unit. The following characteristics
reflect its major features and advantages:
- Capacitive level sender is compatible with the majority of the measuring gauges present in the market (Osculati, Aqua Meter, Vetus, Gaffrig, VDO, Faria) and can be programmed to work with any other non-standard gauge.
- It has only two connecting cables as if it were a regular resistive sender. This feature makes its installation extremely easy because no additional cables have to be provided.
- Our patented electronic system allows the sender to feed autonomously.
- It can be connected to the gauge in place of any existing sender without any special adjustments. Thus the are no costs associated with switching to this type of sender from any other current model.
Capacitive level senders can be used for FUEL, WATER AND WASTEWATER. The sender of each
category in its turn can be either generic or dedicated.
|
|
Features:
- Tank level monitoring for up to 3 tanks
- 14 selectable legends for tank descriptions eg. Fuel, Water, Blackwater
- Hi - Low tank level alarms for 3 tanks
- Tank levels displayed in graphic or percentage format
- Units displayed in litres, imperial gallons or US gallons
- Audible alarm with mute function
- Power supply 10-35VDC
- Display is backlit for easy night time viewing
The 600-TLMN tank level monitor will interface directly with a precalibrated BEP Ultasonic Tank Sender. (Part No. TS1) If fitting an uncalibrated TS1, the sender can be calibrated via the 600-TLMN monitor.
|
|
Product Details:
The 600-TG offers economical monitoring for fresh or grey water tanks (plastic or fibreglass only). Using 600-TGSK strategically mounted well nuts will give 4 tank levels. Supplied with one sender kit. Second sender ordered separately.
Also available is the RV-TS Tank sender. Only one hole is required for installation, the sender is sealed via external lock nuts. Only suits tanks with maximum depth of 280mm.
|
|
|
|
|
|
|
Our tank sensor is driven by the air pressure generated by the water level. It must be installed in the upper part of the tank with the rubber hose that enters the tank so that, when the level of the water increases reaching the rubber hose, the pressure switch effects the contact. The pressure switch, located outside the tank, is a normal on-off switch that, being electrically connected with the control panel of our WCs (grey/black cable), warns through a red led that the tank is nearly full (usually the led is green).
The sensor may be used to commutate different alarms.
It is activated when, further to the water thrust, air pressure generates within the rubber hose. The switch commutates to ON when the water will have submerged the rubber hose for nearly five centimeters.
The sensor is really reliable since there is no mechanical movement in the tank but only the air pressure (there is also a retardant that prevents contact in case of movement of the water while at sea, since the air pressure must remain for over 3 seconds at a given level).
|
|
In addition to accuracy and reliability the TD 4000 comes standard with many intelligent features to measure up to four tanks, four batteries, or a combination of both.
The Smartswitch TD 4000 tank sensor is suitable for diesel, petrol, grey, freshwater and black tanks.
It is suitable for all tank construction materials including stainless steel, plastic and fibreglass.
Simple to install, the TD 4000 comes with two setup options depending on regular or odd tank shape.
Two point calibration for regular shaped tanks (low and full) and five point calibration for odd shaped tanks.
|
|
| ... products without information |
| |
|
|
|
|
|
Installed and ready to use in 30 minutes!
Gobius is the first level indicator in the world that measures from the outside. Installing Gobius to your tank is very easy. Instead of the traditional way of installation, i.e taking the tank apart and drilling holes, you simply attach the sensors to the tank on the outside.
All Gobius products measure from the outside
Very easy to install and setup
Suitable for all tank materials; stainless steel/steel, aluminum, plastic and fibre glass
Gobius can be retro-fitted to any shape or size of a tank
Analouge output for gauges from Wema, VDO, Faria, Teleflex, Phillipi…
Supports NMEA 2000
Extremely low electricity consumption, less than 40 mA (12 Volts)
Support 12 – 24 Volts
30 minutes to install
On the sensor there is a disc of tape that is provided to attach the sensor directly onto the surface of your tank. The panel may be placed in the washroom. All necessary cables and plugs needed to connect the sensors and the panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds.
The Gobius technology (patented)
Each sensor that is placed onto the tank wall consists of a shaker and an accelerator. When the shaker creates a vibration in the tank wall, the accelerator measures the size of the vibration and passes the data on to the control unit.
Art No 970459
|
|
|
|
|
|
|
SENDER LEVEL WITH ALARM 4-20 MA. SIZE 10 TO 100 CM
Codice prodotto: HP--G00XX4-20
INTERNATIONAL PATENT.
Our new capacitive level sensor provides measurement accuracy, reliability and quality. It was designed to respond to the request of a sensor accurate, durable, universal and easy to use. The following features will reflect the advantages:
- The capacitive level sensor is compatible with all 4-20 mA gauges on the market. It is not compatible with STD (240/33 Ohm) and VDO type (10/280 ohms) gauges.
- It can be connected, properly powered, to the gauge replacing any other existing 4-20 mA sensor, with no special precautions needed.
- It is equipped with an exit alarm that may be audible or visible, and is programmed to 20% (for %u2018empty%u2019 alarm) or 80% (for %u2018full%u2019 alarm).
Capacitive level sensors can be used for FUEL, WATER and WASTE WATERS.
The capacitive sensor is currently produced with lengths ranging from 10cm to 100cm.
The %u2018Reed%u2019 level sensor is universal and therefore can be used for all liquids (white waters, black waters, fuel). The capacitive sensor instead exploits the properties of the liquid the level of which is to be measured and therefore has a structure created on purpose for the liquid of interest. In particular, we produce two types of capacitive level sensors, one concerning the fuel sector and one concerning the white waters and black waters%u2019 sector (for measuring the water level the sensor is then the same but has two different types of alarms %u2013 %u2018empty%u2019 for white waters or %u2018full%u2019 for black waters).
|
|
Codice prodotto: HPYXXXXX/HPWXXXXX
Our liquid level senders are level indicating devices compatible with all the petrol and water level gauges available on the market.
They are fuel, sea-water and acid resistant because they are made of the highest stainless steel AISI 316. They are perfectly watertight and have a flange with holes that allows a perfect fitting on the tank.
The sender cables must be connected to the measuring terminals of the indicating instruments, as explained in the user's manuals of the later.
The level indicating gauges available on the market can be divided into two main categories:
1) standard gauges (STD)
2) inverted gauges (VDO-type)
|
|
|
You can now monitor and control up to 8 tanks of any shape or construction. You can see how much is in each tank, pump out each tank, automatically start a watermaker when water levels are low, and automatically turn off watermakers whaen tanks are full. You can be alarmed when fuel is low, deactivate toilets when black tanks are full. The very Smart TC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight tanks. The system consists of the TC-8000 display controller (as seen above) up to eight HT-100 or HT-100/P tank controllers to control each tank, and any number of optional RD-800 repeater displays communicating via a 2-wire network cable with a maximum cable length of 1000 meters. This means you can have the main display at the helm and another display in the bedroom or second helm station. Control the fuel, water, grey and black tanks so you never run out of water or fuel again.
|
|
|
|
|
|
|
CAPACITIVE SENDER
Codice prodotto: HPCHDS/ HPCHDV / HPCHG /
INTERNATIONAL PATENT.
Our new capacitive level sender offers precision of measurement, reliability and quality that are
always sought after and appreciated by the end-users. They were designed to meet the demand
for a precise, durable, universal and user-friendly sending unit. The following characteristics
reflect its major features and advantages:
- Capacitive level sender is compatible with the majority of the measuring gauges present in the market (Osculati, Aqua Meter, Vetus, Gaffrig, VDO, Faria) and can be programmed to work with any other non-standard gauge.
- It has only two connecting cables as if it were a regular resistive sender. This feature makes its installation extremely easy because no additional cables have to be provided.
- Our patented electronic system allows the sender to feed autonomously.
- It can be connected to the gauge in place of any existing sender without any special adjustments. Thus the are no costs associated with switching to this type of sender from any other current model.
Capacitive level senders can be used for FUEL, WATER AND WASTEWATER. The sender of each
category in its turn can be either generic or dedicated.
|
|
Product Details:
The 600-TG offers economical monitoring for fresh or grey water tanks (plastic or fibreglass only). Using 600-TGSK strategically mounted well nuts will give 4 tank levels. Supplied with one sender kit. Second sender ordered separately.
Also available is the RV-TS Tank sender. Only one hole is required for installation, the sender is sealed via external lock nuts. Only suits tanks with maximum depth of 280mm.
|
|
|
|
|
|
|
Our tank sensor is driven by the air pressure generated by the water level. It must be installed in the upper part of the tank with the rubber hose that enters the tank so that, when the level of the water increases reaching the rubber hose, the pressure switch effects the contact. The pressure switch, located outside the tank, is a normal on-off switch that, being electrically connected with the control panel of our WCs (grey/black cable), warns through a red led that the tank is nearly full (usually the led is green).
The sensor may be used to commutate different alarms.
It is activated when, further to the water thrust, air pressure generates within the rubber hose. The switch commutates to ON when the water will have submerged the rubber hose for nearly five centimeters.
The sensor is really reliable since there is no mechanical movement in the tank but only the air pressure (there is also a retardant that prevents contact in case of movement of the water while at sea, since the air pressure must remain for over 3 seconds at a given level).
|
|
In addition to accuracy and reliability the TD 4000 comes standard with many intelligent features to measure up to four tanks, four batteries, or a combination of both.
The Smartswitch TD 4000 tank sensor is suitable for diesel, petrol, grey, freshwater and black tanks.
It is suitable for all tank construction materials including stainless steel, plastic and fibreglass.
Simple to install, the TD 4000 comes with two setup options depending on regular or odd tank shape.
Two point calibration for regular shaped tanks (low and full) and five point calibration for odd shaped tanks.
|
|
|
|
|
|
|
Ballast Tank Gas Detection & Void Space Gas Detection System
MM5001® is a major advancement in marine gas detector technology for monitoring ballast tank gas detection and void space gas detection onboard ships. The system comprises of a central control cabinet with a touch screen panel to display information and alarm status. Within the cabinet is the main PLC controller, analysing equipment plus a pre-sampling circuit as standard. A calibration free, high performance infrared sensor provides the ultimate in reliable flammable gas analysis.
The PLC is extremely reliable with an MTBF of 20 years plus. The gas analyser does not require re-calibration and the pre-purge significantly reduces sampling cycle times.
MM5001® is fully compliant with IACS UR F43, Exxon MOBIL MESC 2002 - Term charter, Chapter 8 & EMSA regulations for double hulled tankers.
- CALIBRATION FREE, HIGH PERFORMANCE IR SENSORS
- FULLY FLEXIBLE PLC CONTROLLER
- PROGRAMMABLE OPERATION DURING BALLASTING
- INTEGRATED SYSTEM FOR BOTH GAS SAMPLING & FIXED POINT SENSORS
|
|
Holding Tank Maintenance
EPA-Registered for Cleaning and SANITIZING Fresh Water Holding Tanks
Designed specifically to sanitize interior hard, non-porous surfaces of water holding tanks, drinking water hoses and water coolers. Also an effective sanitizer for use on food contact surfaces and can be used in RVs, trailers, campers and boats. Benefits include:
-Easy-to-Use, 2-Part System
-Step 1: Clean tank with detergent and rinse
-Step 2: Sanitize tank with sanitizer
-Chemically-balanced sanitizer - even when diluted in hard water
-Will not leave a grit or soap scum
-Not a drinking water additive
Your holding tank is critical to your RV, and preventative maintenance is key to keeping it healthy. Regular use of these products helps prevent problems from occurring while extending the life of your RV.
|
|
| ... products without information |
| |
Waterproof barrels
- PEHD food quality, screw in cover
- 55 L - 2 carry handles
- 50 L - 2 carry handles
- 24 L
- 15 L
- 6 L
- 3,5 L
|
|
Portable oxygen tanks, essential for all vessels.
Different sizes available.
Supplied with storage bag, masks & O2 regulator for easy transport of oxygen supply to emergency situations.
|
|
Portable oxygen tanks, essential for all vessels.
Different sizes available.
Supplied with storage bag, masks & O2 regulator for easy transport of oxygen supply to emergency situations.
|
|
|
|
see the results for the following category : 
