|
|
SeeLeveL 707, multi tank monitor system for plastic tanks
This level gauge has an easy to read LED display. Display fresh, gray, or black tank levels at the press of a button. 9 segmented display gives accuracy to 1/8 (12.5%) of a tank. Orange and red indicators are used for low and empty level warnings for the fresh water tank. Orange and red indicators are used for high and full level warnings for the gray and black water tanks. 3 sender boards are included.
Art No 970206
|
|
SeeLeveL 713, multi tank monitor system
No buttons to push! The level of each tank, plus the outside temperature, is shown individually. 713 provides accurate tank level information in percentage of full. Measures tanks up to 430 mm tall with a single sender or 840 mm tall with dual senders. 3 sender boards are included.
Art No 970220
|
|
Gobius 4WF - For water- or diesel tanks in stainless steel, steel, plastic and aluminium
All Gobius products measure from the outside, avoiding the need of to take the tank apart and drill unnecessary holes.
- Very easy to use
- Traffc lights lamps show the current liquid level
- Automatically checking the level
- No extra service is needed
- Extremely low electricity consumption
30 minutes to install
On the sensors there are strips of tape that are provided to attach the sensors directly onto the surface of your tank. The panel may be placed in the pentry or at the electric control panel. All necessary cables and plugs needed to connect the sensors and panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds, all you need to do is to press a button while the tank is full.
Extremely low electricity consumption, less than 40 mA (12 volts)
Gobius is constructed to minimise electricity consumption and is extremely efficient. Gobius sends power to its sensors in impulses instead of a continuous supply, thus saving your craft’s battery.
Art No 970381 Gobius 4WF for tanks in stainless steel, steel & aluminium
Art No 970193 Gobius 4WF for tanks in plastic
|
|
SeeLeveL 709, multi tank monitor system
This system provides an outstanding balance between low cost and full features. Instead of single points that give you only a close appr. of how full your tanks are this system offers a continuous level and shows an actual number, in percent of full.
Measures tanks up to 300 mm tall with a single sender or 600 mm tall with dual senders. 3 sender boards are included.
Art No 970213
|
|
Gobius 4 for holding tanks in stainless steel, steel, plastic & aluminium
Gobius has been developed to meet the demand from those boat owners who want more information, those who not only want to know when the tank is full.
All Gobius products measure from the outside.
-Coloured lamps show the current fluid level
-You avoid the struggle with taking the tank apart
-No extra drilling of hole
-No need for extra service
-Extremely low electricity consumption, less than 40 mA
-Good for everybody: boat owners and environment
30 minutes to install
On the sensors there are strips of tape that are provided to attach the sensors directly onto the surface of your tank. The panel may be placed in the washroom. All necessary cables and plugs needed to connect the sensors and panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds, all you need to do is to press a button while the tank is empty.
Extremely low electricity consumption, less than 40 mA (12 volts)
Gobius is constructed to minimise electricity consumption and is extremely efficient. Gobius sends power to its sensors in impulses instead of a continuous supply, thus saving your craft's battery.
Art No 970091 Gobius 4RFP for tanks in stainless steel, steel & aluminium
Art No 970053 Gobius 4RFP for tanks in plastic
|
|
Optimized wind indication available instantly in 'analog' or digital display, with large backlit digits for excellent visibility.
Port and starboard color coding, combined with 'Locked-Angle' function, contribute to easier steering to a pre-selected wind angle.
|
|
In addition to providing complete management of your vessel's fuel flow and fuel remaining, Navman's Fuel 3100 utilizes speed data from GPS or paddlewheel input to calculate real-time fuel economy data. The Fuel 3100 can be programmed to display these values in miles per gallon or litre.
This important information allows you to determine the optimum throttle and trim settings for single and twin engine boats. This will save you money on fuel and minimize long-term engine wear by running your engines at their most efficient settings.
|
|
|
CHC 1102 M, is the new hand held chain counter supplied with integrated LED light as standard. CHC 1102 M is supplied with a connecting cable extensible up to 4,2 m, watertight deck plug and socket and a neat stowage bracket. CHC 1102 M is patented product.
|
|
Automatic and remote control operation for safe and easy single handed anchoring. Auto Anchor™ determines the amount of chain (or rope/chain) deployed and provides one touch automatic retrieval.
Auto Anchor™ 500C - for all chain rodes
Auto Anchor™ 500RC - for combination rope & chain rodes (operates with solenoids)
Auto Anchor™ 500RCX - for combination rope & chain rodes (solid state switching instead of solenoids)
Easy to read large LCD display.
Electronic fault diagnosis and easy set safety lock.
Measurement in feet or metres.
Simple installation, set up and calibration.
Adjustable LCD back lighting for night operation.
Settings retained if unit turns off or battery fails.
|
|
|
A variety of Tohatsu gauges are available through your local dealer; hour meters, speedometers, tilt/trim gauges, Analog and LCD tachometers and even multi-function LCD gauges. All manufactured to Tohatsu's precision standards. See your dealer for a complete list of all Tohatsu gauges available for your outboard.
|
|
Our award winning ST60 instruments made better! The ST60 Plus instrument line features new mounting bezels that compliment Raymarine%u2019s popular C-Series and E-Series multifunction navigation displays. ST60 Plus offers everything from stand-alone display units to sophisticated, fully integrated systems with intelligent repeaters, remote controls and flexible mounting options. Significantly enhanced displays ensure superior viewing angles for both day and night conditions. Simple, push-button controls make ST60 Plus instruments extremely easy to use.
|
|
|
A variety of Tohatsu gauges are available through your local dealer; hour meters, speedometers, tilt/trim gauges, Analog and LCD tachometers and even multi-function LCD gauges. All manufactured to Tohatsu's precision standards. See your dealer for a complete list of all Tohatsu gauges available for your outboard.
|
|
The Series 300 Rudder Angle Indicator provides an accurate and continuously updated indication of your rudder position. In a stand-alone system up to five indicators can operate at the same time in conjunction
with the standard RFU 400 follow-up, No master indicator is required. Installation is easy and requires only a shielded 2 conductor wire, 24 AWG for cable runs up to 65' (20 meters).
|
|
|
The Rudder Angle Indicator is a flush mounted instrument providing a clear indication of the vessel's rudder position. This information is vital when docking or manoeuvring in close quarters with other vessels.
|
|
| ... products without information |
| |
|
|
