|
|
TRAC Integrated Hydraulic Systems are used to support TRAC Thrusters, TRAC Marine Stabilizers and ride control products as well as third party hydraulic devices such as capstans, windlasses, cranes, generators, bilge pumps etc. Arcturus Marine, manufacturer of TRAC products, evaluates each boat application individually and configures the integrated hydraulic system to meet the specific needs of your yacht.
ABT.TRAC typically uses quiet, high efficiency hydraulic piston pumps.
TRAC hydraulic pumps are driven from the front of main engines or generators or from specialized PTO's (power take-offs) that have become more widely available on main engines, the marine gear, or generator.
|
|
|
Standard "Mercuiser" tilt/trim pump. Can be used for jack plates, trim tabs, or other applications. Available with full package (solenoids, wiring harness, backing plate, etc) or just as pump motor.
|
|
HYDRAULIC HELMS
The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different kits can be found on the price list.
|
|
|
The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different kits can be found on the price list.
|
|
The pumps (in STAINLESS STEEL too) are based on the geometry and properties of the cycloid. In fact, they are lobe pumps (or internal gear pumps). All of the main components are made of sintered materials. In the development of these two types of technology, we have given an emphasis to high performance in terms of capacity and pressure in proportion to the pump size (owing to the reduction in unused volume), as well as to duration and lower noise level (owing to the porosity offered by the powder metallurgy).
Self-lubrication is another important property intrinsic to every model of this product, and it is a guarantee against buckling.
|
|
No more unprotected hydraulic hoses on the stern. By running the hydraulic hoses through the cylinders we have reduced the risk of hose damage, and there are two less holes to make through the stern bulkhead. In addition, installation is much simpler. Also new is the incorporation of a trim indicator in each cylinder, and this is supplied as standard.
The cylinder kit with built-in indicator will give you full control of the boat's attitude in the water. More powerful cylinders mean that only one per trim tab is required for boats up to 40 feet.
The cables from the indicators are run to a connector box and then to the indicator instrument. There is only one cable from the connector box, which makes connection easier.
|
|
The Navtec Rotary Pump is designed to be used in conjunction with leading winch manufacturer's grinding systems to provide faster movements of cylinders.
|
|
|
Hydraulic drive unit with non-reversible motor but with electric magnetic valves and adjustable flow. A built in reservoir ensures quick response. The adjustable flow enables accurate tuning between the vessels steering characteristics and the autopilot control. Suitable for bigger yachts and professional vessels.
|
|
|
Power pack size 2 is a small, powerful hydraulic unit with an anodised aluminium reservoir. By using anodised aluminium throughout we have achieved maximum corrosion resistance and a weight of only 48 kg (106 lbs) with five functions.
|
|
| ... products without information |
| |
HYDRAULIC HELMS
The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different kits can be found on the price list.
|
|
|
The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different kits can be found on the price list.
|
|
| ... products without information |
| |
|
|
