|
|
Arcturus Marine evaluates each boat application individually and configures the hydraulic system to meet the specific needs of your yacht.
|
|
Reliable low noise fixed displacement hydraulic vane pumps are supplied standard on NAIAD Models 160, 174, 1018, 252, and 254. Much more efficient than gear pumps, these premium quality pumps are physically small relative to their output power. They easily mount to your main engine, marine gear, or other power source. Rotation, keyed or splined shaft, and SAE A or B flange configurations are in stock to match vessel requirements.
Pressure compensated axial piston pumps of the highest quality are supplied standard on all mid range and larger NAIAD Systems (model 302 and above). These pumps automatically vary flow to match hydraulic demand for high efficiency and minimal power consumption resulting in substantially cooler operating temperatures and long component life. Rotation, keyed or splined shaft, and SAE B or C flange configurations are in stock to match vessel requirements.
All NAIAD pumps may be provided pre-assembled to a highly efficient Totally Enclosed Fan Cooled AC electric motor in 50 or 60Hz. These power packages are supplied with a soft starter to minimize inrush current during start-up. Specify ship’s voltage, phase and frequency. |
|
| The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different kits can be found on the price list. |
|
HYDRAULIC HELMS
The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different kits can be found on the price list. |
|
No more unprotected hydraulic hoses on the stern. By running the hydraulic hoses through the cylinders we have reduced the risk of hose damage, and there are two less holes to make through the stern bulkhead. In addition, installation is much simpler. Also new is the incorporation of a trim indicator in each cylinder, and this is supplied as standard.
The cylinder kit with built-in indicator will give you full control of the boat's attitude in the water. More powerful cylinders mean that only one per trim tab is required for boats up to 40 feet.
The cables from the indicators are run to a connector box and then to the indicator instrument. There is only one cable from the connector box, which makes connection easier. |
|
Reliable operation of a steering system depends upon the quality and performance of the helm pump. The Jastram "H" series manually operated helm is a precision made axial piston pump specifically designed to operate effectively at a very slow turning rate.
The H26/36/58 provide excellent primary or backup steering for small and relatively large steering systems. |
|
Reliable operation of a steering system depends upon the quality and performance of the helm pump. The Jastram "H" series manually operated helm is a precision made axial piston pump specifically designed to operate effectively at a very slow turning rate.
The H60, 90 and 110 are among the largest helm pumps made and provide excellent primary or backup steering for large steering systems. |
|
Ideal for Twin Inboard / Twin Transmission & Single or Twin Generator Diesel
Up to 8 ports for specialty applications
Manifold shut off valves for easy operation
Enclosed in a molded housing providing excellent engine room presentation
Mounting plate for easy engine room installation
Self priming GEAR driven reversible pump for drain and fill applications
12, 24, or 32 Volt motors available
Pumps water, oil and diesel fuel
Built in fuse for motor protection |
|
| ... products without information |
| |
If there is no electrical power on board you can always rely on the little QL manual bilge pump.
It pumps 0.9 litre per stroke which equals 90 litres per minute at 100 strokes per minute. |
|
Six strokes pump out one gallon of water. Non-corrosive ABS plastic pump with flexible polyethylene hose. Bottom cap is removable for easy cleaning.
|
|
| Constructed of durable ABS plastic. For all fluid reservoirs including differentials, transmissions and gear cases. Dispenses 1 fl. Oz of product with each depression. Designed to fit all Sta-Lube quart, 1/2 gallon and gallon containers. |
|
| This RHINE STREAM spring pump offers to you "a Nonplusultra "in every respect. Highest pumping performance with nearly fatigue-free manipulation - practically blockage-free - very fast cleaning possibility. A long, handy hand lever makes a simple manipulation possible, also during a longer period. Large pipe unions and the special construction protect against clogging. Even foreign bodies like e.g. Rags could be through-promoted. Easy cleaning quick, maintenance - after opening the inspection cover direct entrance to the valves. |
|
| ... products without information |
| |
... see all the products in the category
Hand pumps
|
|
|
see the results for the following category
