|
|
Wide Marine Seat (500W)
Here’s the perfect seat for boat owner’s who need some extra room. At 36” wide, the 500W is a full 8” wider than standard Series 500 seats. This roomy single pedestal seat is available in tough baked on powder coat or deluxe polished chrome finishes with your choice of upholstery for the helm or fly bridge.
|
|
Available in Slimline or Standard seat, including all 500 Series features and adjustments.
Choice of Low or High Back without headrest.
Massive 6 5/8 inch diameter shock-absorbing pedestal with nitrogen diaphragm shock.
10-position rebound damping adjustment.
Fixed 28 inch seat height with 4 inches of shock mitigating stroke.
Finish: D/A Aluminum – Standard or Your choice of Powder coat color.
Upholstery: Hi-Tenacity Polyester – Standard, Color “Black” or your choice of colors in either Naugahyde or Ultra-Leather.
Options include: Reinforced Arms and CRES Reel Harness System* (* available for Slimline high back configuration only).
|
|
The 800V53 Advanced Shock-Mitigating Seat features a Proprietary Suspension System that reduces chronic fatigue, orthopedic injuries and repetitive stress injuries associated with unpredictable extreme boat motions.
Features include:
· 7-inch Vertical Stroke inertial valve regulating Nitrogen Pressurized Taylor Shock Absorber with Accumulator and go-no-go status indicator.
· Two modes of operation: Seated or Standing.
Rapid conversion from seated to standing positions improves operator performance and passenger comfort.
Finish: Hard Coat anodized. Color: “Olive” Standard or Your choice of Powder coat color.
Upholstery: Hi-Tenacity Polyester – Color: “Black” or your choice of colors in either Naugahyde or Ultra-Leather.
· Common Suspension Frame
Modular design enables single deck-mounted, double deck-mounted and single bulkhead mounted configurations.
|
|
500 Series Seats (500-100)
Complete with all of the same features as our luxury high back seats, but finished in tough baked-on powder coat, these all-purpose high backs offer versatile comfort for mariners of all shapes and sizes.
|
|
500 Series Seats (500-200)
The all-purpose Admiral helm seat finished in tough baked-on powder coat. Available in your choice of colors for the helm or Flybridge, the original STIDD is still the best value in marine seating.
|
|
Slimline Series Seats (500NH)
All of the space-saving Slimline features in a high back configuration. Finished in tough baked-on powder coat, these all-purpose 23-inch wide high backs look good while providing hours of comfort at the helm. Available in your choice of colors.
|
|
|
Chair MARELUX features a durable fibreglass shell, contoured to provide a maximum of comfort and side support in any sea condition. Removeable seat-cushion. Also available with armrests. Nearly all options including armrests are compatible. Ideal for runabout or flying bridge installations!
|
|
Strong fibreglass bucket chair with outstanding comfort especially for outdoor
applications like flying bridge. Easy access due to adjustable fold-up armrests
with a solid construction made out of stainless steel. Optionally fitted with
fold-up cupholder and an adjustable lumbar-support.
|
|
Pilot seat for outdoor use
Imitation leather, customer-supplied materials
- Supporting structure in fiberglass
- Movement to drop the seat in stainless steel AISI 316
|
|
Pilot seat for outdoor use
Imitation leather, customer-supplied materials
- Supporting structure in fiberglass
- Movement for standing drive in polished stainless steel AISI 316
|
|
|
Pilot seat for indoor and cockpit use, with electrically adjustable backrest for optimal driving position
|
|
|
Pilot seat for indoor and cockpit use, with manually adjustable backrest for optimal driving position
|
|
Z99-2000
TACO’s newest and most luxurious seat is the ultimate in comfort and class. Features high seat back with fully adjustable armrests, seatback and headrest. All polished stainless steel hardware, and rich gray leather upholstery.
|
|
M-475 Pilot Series Helm Seat
The M-475 is setting the new standard for a mid-sized helm seat.
The chair features an advance design for enhanced lumbar and
arm support. Complete with slide and cushion.
|
|
STANDARD WHITE MARINE VINYL UPHOLSTERY
S/S BACk SUPPORT BRACKETS
PH-34-437, STANDARD ALUMINUM SLIDE/SWIVEL ASSEMBLY
|
|
This 4" diameter Shock Absorbing Pedestal provides the ultimate in boating comfort and safety. Manufactured with high grade marine aluminum, the pedestal provides the ultimate in safety, comfort and strength. The shock absorbing suspension allows passengers to remain seated when travelling on rough water, avoiding the need to stand up to feel secure.
Seaspension Pedestals are designed to retrofit into most boats with conventional rigid posts, and feature internal progressively rated springs that self-adjust to the passenger's weight. The Seaspesion Pedestal is available in 16", 19", 22" or 25" heights.
|
|
|
|
|
|
|
UPSCALE QUALITY, PREMIUM MATERIALS: Only the best materials are used in the Commander Seat Hardware System! With oversized anodized aluminum tubing, solid stainless steel slide rails, Delrin bearing rods, and CNC Machined or Precision-Cast Aluminum, the hand built Commander system makes a statement of class aboard any large boat or yacht.
ROCK SOLID, WOBBLE FREE
SWIVEL: 360 degree free rotation or positive lock in 45 degree increments - single lever operation with drag adjustment for optimal performance
SLIDE: 6" of fore and aft travel with positive locking at 1" increments. Solid 1" stainless steel slide rails with lubrication system are operated with a single lever for effortless and smooth precision operation
LIFT: Vertical travel of 4" is operated from a single lever in a lift-to-lift motion. A gas spring and lubrication system provide 112 lbs. of lift force
The Yachtsman II is available in 4 different Gas Rise Adjusting Height Systems.
For adjusting height availability please see options below.
Can be used with the Atlantis Helm Chair
|
|
The newest seat base from Llebroc Industries, the Helmsman Bolt Down Base Stand is available in two models with variable height adjustments.
The LLE-5410 features a 4" mounting post which is adjustable from 18" to 28".
The LLE-5409 also has a 4" post, but adjusts from 23" to 33".
A 12-inch mounting plate bolts directly to the deck ensuring rock solid seat stability in even the roughest seas. This configuration makes it desirable for even the most luxurious boats.
Constructed of 5052-H32 1/4" thick aluminum, the entire unit is sealed against the most severe weather conditions by a black UV protected textured powder coat. The Helmsman fits all existing 4" marine hardware and seat mounts.
|
|
model 6691
manual seat pedestal bases
Pedestal bases for manual seats are in marine grade 316L stainless steal, provide full 360° rotation and include gas-lift height adjustment with manual locking. On automatic seats all cables pass through the pedestal to the controls on the armrests.
|
|
|
Seat pedestal in light alloy, 360° rotary, adjustable in height with horizontal sliders .
|
|
- This pedestal is completely made of stainless steel 316
- Minimum height is 395 mm
- The height adjustment is 200 mm
- The lever is used to pump up and lower down as well as to block the pedestal
|
|
- Stainless Steel Pedestal
- The voltage is 24 V
- Stroke is 150 mm
- Caution! The seat mounted on the pedestal can not rotate, but an additional rotation unit is available
|
|
The HYDROMAR HD CYLINDER is a hydraulic cylinder. The cylinder is 200 mm in height adjustable. The minimum height of the cylinder is 365 mm
A complete pedestal consist of two parts, the cylinder and a stainless steel fixed part, which is available in the height 50, 100, 150, 200, 250, 300 mm
The lever is used to pump up and lower down the pedestal as well to engage the brake for the rotation
The fixed stainless steel part is so constructed that fitting the pedestal on the Multi-Rail is very easy
Also available in complete stainless steel version
|
|
Z80-3000 Series
Satin anodized aluminum seat support and tapered base (100mm/76mm). Seat support feature Delrin bushings for smooth 360 degrees rotation and 6" fore/aft slide. Stainless steel lever or Power-matic, gas-assist seat height adjustments for effortless control.
|
|
Ultraflache ground bus from VA-steel, inclusive. Central plate anti-slip.
Available in the lengths 1010 mm, 1170 mm, 1490 mm, 2000 mm, 2500 mm, 3000 mm and 3500 mm.
Both installation version and structure version with frameworks possible!
Computation G-test: 10 G.
Available also with blocking system by means of Zentralverriegelung (push of a button).
|
|
|
|
