|
|
|
The lighting fitting is purposed for illumination of technical accommodation, holds, decks etc. on vessels. Mild or stainless steel body, powder coating; polycarbonate diffuser. Wall or ceiling mounting surface. IP66, 1x60W
|
|
- High quality explosion proof luminaire, zone 2
- Easy maintenance
Specifications:
- High-quality Ex n longlife luminaire.
- The luminaire has a hinged geartray with quick connector for easy maintenance.
- The luminaire housing is made of Galfan (Z) or acid resistant stainless steel (S), with white stove-enamelled epoxy/polyester powder finish.
- Housing of Galfan is not suitable for marine outdoor installation.
- The cover is made of impact-proof polycarbonate.
- The emergency model is supplied with an external battery box. Emergency light versions (18W and 36W) are available with 1.5 or 3 hours battery duration.
|
|
Applications : hazardous areas zone 1 and 2
Approvals : according to the rules of relevant classification societies, additional VDE and IEC, examination certificate KDB 04 ATEX 339x
Housing : zinc coated steel, seamless deep drawn, powder coated white
Diffuser/Shade : polycarbonate, clear
Mounting : 2 welded brackets, 4 mounting holes, Ø 8 mm
|
|
Class 1, Division 2, Groups A,B,C,D, T3B.
Class 1, Zone 2, Groups IIA & IIB, T3B.
Clear polycarbonate diffuser, which is virtually indestructible.
Terminal block at each end for incoming wiring.
Feed through wiring up to 23A, eliminating the need for field junction boxes.
Four cable entries, two in each end.
Corrosion resistant aluzinc or stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
Stainless steel hardware.
|
|
|
Explosion-proof light up to 200W, with security switching arrangement. PTB-No. PTB 03 ATEX 1111,Ex-protection class: EEx de IIC T3+T4 Pressure resistant enclosure Red cast brass casing and glass ring Brass wire-guard With lampholder E 27 or B 22 Temperature class: hanging installation T4 - bulb up to 150W - metal alloy bulb up to 160W* - mercury vapour 80W* T3 - bulb up to 200W - mercury vapour 125W* - fluorescent bulb E 27 25W* T5 - DULUX EL 23 *Ignition and ballast unit required
|
|
|
Ex-protected fluorescent light fitting with 2 channel electronic ballast unit for bi-pin fluorescent lamps (G13) 2x18W. Housing made of glass mat reinforced polyester, protective cover made of polycarbonate. Double-sided lock with 10 latch points. Protective cover hingeable on both sides. Automatic switch built as a safety disconnector acc. to EN 60947.Automatic switch ensuring the disconnection of all exposed components when the fitting is opened . Large terminal compartment with 6 terminals up to 6 mm². Rated voltage: AC 110V-254V +/- 10%, 47-63Hz, DC 110V-230V /- 10%. Rated current: 0,18A; Cos phi: 0,95 (230V). 2x plastic cable gland M25. Permissable ambient temperature -25°C to 50°C. Insulation class I, single ended through-wiring.
|
|
|
EEx e high quality longlife luminaire. The luminaire has a hinged geartray for easy maintenance. The luminaire housing is made of Galfan (Z) or acid resistant stainless steel (S), with white stove-enamelled epoxy/polyester powder finish. Housing of Galfan (Z) is not suitable for marine outdoor installation. The diffuser is made of impact-proof polycarbonate. The emergency model is supplied with an external battery box. Emergency light versions (18W and 36W) are available with 1.5 or 3-hours battery duration (T4). All emergency fixtures (E1/E3) are prepared for remote control of emergency functions.
|
|
High-quality Ex n longlife luminaire.
The luminaire has a hinged geartray with quick connector for easy maintenance.
The luminaire housing is made of Galfan (Z) or acid resistant stainless steel (S), with white stove-enamelled epoxy/polyester powder finish.
Housing of Galfan is not suitable for marine outdoor installation.
The cover is made of impact-proof polycarbonate.
The emergency model is supplied with an external battery box. Emergency light versions (18W and 36W) are available with 1.5 or 3 hours battery duration.
|
|
Design- According to rules of maritime classification societies, additional IEC/EN
Approval authority- Physikalisch-Technische Bundesanstalt Braunschweig, cert. no. PTB 02 ATEX 2113
Protection degree- IP 67
Housing- Zinc coated steel or stainless steel
Gear tray- Zinc coated steel sheet
Diffuser- Polycarbonate clear
Electric- Electronic ballast; flexible wiring, heat resistant up to 105° C; through wiring up to 16 A possible; type with battery back up system; Integrated NiCd battery, incorporated overloading protection, LED for indication of battery power
Emergency operation- 1 x 18 W 180 minutes at 45 % luminous intensity, 1 x 36 W 180 minutes at 25 % luminous intensity
Charge time after full discharge- 18 W 24 h, 36 W 36 h
Cable entry- With Ex-certificate; M 25 x 1.5; for cable dia. 10 to 17 mm (others on request)
Lamp base- G 13
Light sources- (not included) 2-pin T 26 flourescent lamp 18 W, 36 W
Mounting- 2 welded brackets with 2 mounting holes each, dia. 10.5 mm
|
|
|
|
