|
|
The Hydrotrans G4-series are transporters with four-wheel steering. Both the front and the rear wheels can be independently controlled. This makes the transporter very manoeuvrable. Built with High Grade S355 Steel, the G4 series of transporter is available with capacities of from 20 tons and up.
Thee G4-series can be delivered with width adjustment so the transporter can be adjusted in width.
The G4 series, like the G2, requires a tow vehicle which supplies the hydraulic power. The controls of the Hydrotrans can all be done from the tow vehicle. Attaching the transporter to the tow vehicle is done with two simple latches and a plug which provides the power needed.
All Hydrotrans equipment are built according to CE-regulations and tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Lease to purchase options are available.
Contact us for additional information or a free quotation.
|
|
|
|
|
|
|
The Hydrotrans hydraulic trailer is designed to launch and recover boats on a slipway, transport the boats over land and park them in a storage area. The Hydrotrans SW20-25 series can be pulled by a truck or tractor. Using the hydraulics of the tow vehicle, the boat is lifted by hydraulic pads. The front of the boat is supported by the crossbeam. For sailboats an adaptor is available. The width of the trailer frame and the height are adjustable.
The Hydrotrans SW20-25 is also suitable for transporting boats on T-cradle's. A choice of solid or pneumatic tires offers optimal comfort over any terrain capable of carrying the load. A further advantage of the SW series is that not every boat needs to be placed on a cradle which saves on storage material.
Standard Technical specifications
High Grade S355 Steel
Frame, open U-designed frame with adjustable width, height and length.
Wheels, 8 pneumatic or 8 solid tires.
Hydraulic cylinders, high quality cylinders with safety valves
Paint system, 2 coats epoxy primer and 1 coat 2 component topcoat, RAL 9001.
A range of options can be included including Hydraulically extendable drawbar, hydraulic lifting pads and adjustable width.
The Hydrotrans SW series is built according to CE-regulations and is tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment comes with a five year warranty
Lease to purchase options are available.
The SW series trailers are made up to 60 ton's. Larger capacity's on request.
Contact us for additional information or a free quotation.
|
|
|
|
|
|
|
The Hydrotrans G2 series is specially designed to transport boats on 4 point cradle’s. Steering is by two wheels. The transporter is pulled by an agriculture tractor, reachtruck or a lift truck. The controls for the transporter are mounted in the cabin of the tow vehicle. Many options are available such as steerable drawbar and hydraulically adjustable width. Other options and custom designs are also available.
Standard features on all G2 series are
High Grade S355 Steel
Frame, open U-designed frame.
Wheels, 4 solid tires.
Hydraulic cylinders, high quality cylinders with safety valves
Paint system, 2 coats epoxy primer and 1 coat 2 component topcoat, RAL 9001.
All Hydrotrans equipment is built according to CE-regulations and tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment comes with a five year warranty
Lease to purchase options are available
Hydrotrans has been supplying boat and material handling equipment since 1996. A wide range of custom designs can be provided to suit individual requirements.
Contact us for additional information or a free quotation.
|
|
|
|
|
|
|
The SW15 hydraulic trailer is designed to launch and recover boats on a slipway, transport and park them in a storage or work area. The SW15 can be pulled by a reach truck or an agricultural tractor. Using the hydraulic capacity of the tow vehicle for all the hydraulic functions, the boat is lifted by 2, or an optional 4 hydraulic or mechanical pads. The width of the trailer frame and the height are adjustable. The pads and drawbar are manually or hydraulically adjustable. The front of the boat is supported by the crossbeam. For sailboats or multihulls, an adaptor is available. The Hydrotrans SW15 is also suitable for transporting boats on T-cradle’s. The SW15 offers optimal security through any terrain capable of supporting the load.
Technical specifications
High Grade S355 Steel
Capacity, 15.000 kg
Frame, open U-designed frame with adjustable width, height and length.
Wheels, 4 pneumatic or 4 solid tires.
Drawbar, 1,0 mtr. extendable.
Pads, 2 polyurethane pads 930x320 mm.
Hydraulic cylinders, high quality cylinders with safety valves.
Paint system, 2 coats epoxy primer and 1 coat 2 component topcoat, RAL 9001.
Standard Dimensions (call for options):
Height on pads, 750 mm.
Height on front, 430 mm.
Distance between centre of pads, 1200-2000.
Lifting height frame, 700 mm.
Lifting height pads, 400 mm.
The Hydrotrans SW series is built according to CE-regulations and tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Lease to purchase options are available.
Contact us for additional information or a free quotation.
|
|
|
|
|
|
|
The SW 50 is designed to launch and recover boats on a slipway, and park them in storage or repair area. The SW50 is towed by a reach truck or an agricultural tractor which supplies hydraulic power. The boat is lifted by 6 hydraulic pads. The front of the boat is supported by the crossbeam. For sailboats an adaptor is available. The width of the trailer frame and the height are adjustable as are the pads and drawbar. Many options, such as hydraulically extendable drawbar, and frame, are also available. Solid tires offer optimal security over any terrain capable of supporting the load.
Technical specifications
High Grade S355 Steel
Capacity, 50.000 kg
Frame, open U-designed frame with adjustable width, height and length.
Wheels, 16 solid tires.
Drawbar, 2,0 meter. Extendable.
Pads, 6 polyurethane pads 930x320 mm.
Hydraulic cylinders, high quality cylinders with safety valves
Paint system, 2 coats epoxy primer and 1 coat 2 component topcoat, RAL 9001.
Dimensions
Height on pads, 765 mm.
Height on front, 385 mm.
Distance between center of pads, 1420-2820.
Lifting height frame, 500 mm.
Lifting height pads, 400 mm.
All Hydrotrans equipment is built according to CE-regulations and tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Lease to purchase options are available
Hydrotrans has been supplying boat and material handling equipment since 1996. A wide range of custom designs can also be provided to suit individual requirements.
Contact us for additional information or a free quotation.
|
|
Adjustable inside clear width feature as standard
Allows the hoist to have a duplicate role of both recovery/launch and boat parking function
Stainless steel piping, hydraulic couplings and fittings to 316 Marine Standard
Stainless steel shafts throughout
Anti-flip hitch to prevent vertical jack-knifing
Can be supplied to suit a variety of towing vehicles
|
|
Our trolleys represent an innovation in the range of boat trailers, as a special steering and handling system is installed, controlled via PLC, that permits well 7 handling configurations: steering on all 4 wheel groups, steering on the front wheel groups, steering on the rear wheel groups, along a diagonal ("crab" steering), at 90° ±10°, all-round ("carousel").
The machine results to be extremely easy to drive, via the remote control, and particularly versatile.
Visit the website www.cimolaitechnology.com if you want to know more and keep up-dated!
|
|
Our trolleys represent an innovation in the range of boat trailers, as a special steering and handling system is installed, controlled via PLC, that permits well 7 handling configurations: steering on all 4 wheel groups, steering on the front wheel groups, steering on the rear wheel groups, along a diagonal ("crab" steering), at 90° ±10°, all-round ("carousel").
The machine results to be extremely easy to drive, via the remote control, and particularly versatile.
Visit the website www.cimolaitechnology.com if you want to know more and keep up-dated!
|
|
Picture : Mobile Boat Trolley MBH 120 + Mobile Boat Hauler MBH 160
We can supply MOBILE BOAT HAULERS and MOBILE BOAT TRAILERS for handling and transporting, dry-docking and launching boats with a weight up to 1500 ton.
Our Company can design, manufacture and supply the most appropriate travelift, and also guarantee direct after-sale and spare parts service, with highly skilled staff, even for equipment of other manufacturers.
Our staff consists of persons who can boast a 30-year experience in this field.
We are presently fabricating 4 units of Mobile Boat Hauler MBH 820 , each of them with a capacity of 820 ton., to date the biggest ever, worldwide !
|
|
Our trolleys represent an innovation in the range of boat trailers, as a special steering and handling system is installed, controlled via PLC, that permits well 7 handling configurations: steering on all 4 wheel groups, steering on the front wheel groups, steering on the rear wheel groups, along a diagonal ("crab" steering), at 90° ±10°, all-round ("carousel").
The machine results to be extremely easy to drive, via the remote control, and particularly versatile.
Visit the website www.cimolaitechnology.com if you want to know more and keep up-dated!
|
|
Wise Handling offer a range of products designed to enable the transportation of boats from the launch/retrieval area to the boat park.
Available in lift capacities from 10TN - 200TN
Full remote wireless control of all functions
Towed versions available
|
|
|
|
|
|
|
The Hydrotrans RM-series is a 4 wheel steering, self powered and radio remote controlled transporter. This series of transporters will transport boats or other material on four-point cradles. The engine and hydraulic pumps can be placed at the side or the front of the transporter. The wheels are driven by hydraulic motors. The energy source and steering controls are all carefully and safely hidden in the motor compartment, this compartment is also isolated to reduce noise.
Built with High Grade S355 Steel, the RM-series is available from 20 tons and up.
Hydrotrans has been engineering and building boat and material handling equipment since 1996. A wide range of custom designs can also be provided to suit individual requirements.
All Hydrotrans equipment are built according to CE-regulations and tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment come with a five year warranty
Lease to purchase options are available.
Contact us for additional information or a free quotation.
|
|
|
|
|
|
|
The SW40 is designed to efficiently launch and recover both power and sailboats and fills a gap in a growing line of trailers from 20 tons to 300 tons.
Built wih High Grade S35 steel and adaptable to a variety of hull shapes and slipway conditions, the SW40 is an economical choice for boatyards who service a wide range of boats. The height of the pads in the lowest position are 930 mm. and in maximum height are 1930 mm. Extra extensions for sailboats add another 300 mm. The pads are nondestructible polyurethane and are extremely durable with an extended lifetime of use.
The telescopic drawbar, with a maximum length of 2000 mm is extendable with hydraulics. As with all Hydrotrans trailers, the hydraulic hoses are protected.
Wheels are solid 23 x 10-12. Pinions are made from Chromax to reduce wearing, and sit on brass bearings. Grease points are protected to avoid damage. In a feature unique to Hydrotrans, the operators valve block is one piece.
Hydrotrans has been engineering and building boat and material handling equipment since 1996. Standard models are the G2 (2 wheel steering) and G4 (4 wheel steering) transporters, the SW series for slipways, the RM series for remote control and the Aquaterra series of cranes. A wide range of custom designs can also be provided to suit individual requirements.
All Hydrotrans equipment is built according to CE-regulations and is tested at the factory before shipment. All Hydrotrans equipment can also be built to SAE standards.
All Hydrotrans equipment comes with a five year warranty
Lease to purchase options are available.
Contact us for additional information or a free quotation.
|
|
| ... products without information |
| |
|
|
see the results for the following category :