|
|
Binks Century LEL
- MACT-compliant - non atomizing technology
- Optimum catalyzation
- External mix - no flush
- Reduces over-spray
- Low maintenance
|
|
INDy X - External Mix Resin/Chopper System
The INDy X is solvent free. It operates at the lowest pressure in the industry which makes the INDy X the number one choice for low emission dispensing.
The flexible design of the INDy X gun allows for the use of airless or multi-port impingement nozzles to meet your application preference or lower emission requirements.
The ergonomic design means extra comfort for the gunner. Reliable and simple construction means greater durability and easier maintenance.
|
|
Binks HVLP - (Air Assisted-Airless)
- Fully complies with all HVLP requirements
- Optimum catalyzation
- External mix, no flush
- Works with heavy materials
- Low maintenance
|
|
INDy Internal Mix, Non-Atomized Dispense System
With extended length mix, precision check valves and heavy duty valve design, the INDy Internal Mix gun achieves the most complete and consistent mix at the lowest levels of styrene emissions for open mold processing.
The INDy Internal Mix, Non-Atomized Dispense System employs a single orifice, directed-column technology to deliver a resin / chopper system with the lowest levels of styrene emission in the industry. Independent testing confirms this.
|
|
Formula Internal Mix, Non-Atomized Dispense System
Fully adjustable pattern control & precision check valves to automatically balance fluid pressures. Extended mix area results in the best mix. No needles" design - GlasCraft's unique fluid delivery system assures the most reliable performance along with the lowest maintenance. This feature also allows for flexibility in your choice of spray materials. Special hardened valves - This unique heavy-duty valve design is specially engineered for today's low VOC formulations. Easy access to valve packings - Quick and simple replacement of the valve packings results in less maintenance downtime = more uptime = more profit for your operation! Patented dual air piston - The most powerful trigger actuation available on the market!
|
|
Simultaneous fibre glass & resin spray-up is both a traditional and a modern technique. It is nowadays employed in a great variety of applications.
Matrasur Composites' equipment range offers not less than 6 spray-up guns and 4 models of fibre choppers which cover a variety of needs.
|
|
| ... products without information |
| |
Binks HVLP - (Air Assisted-Airless)
- Fully complies with all HVLP requirements
- Optimum catalyzation
- External mix, no flush
- Works with heavy materials
- Low maintenance
|
|
7N Gel Coat Gun
- Ideal for gel-coat touch-up, repair, and production
- External mix, 7N gun for gel coat
Available as either a internal or external mix, the Binks 7N is the standard spray gun used with our Grani-Tec outfits.
|
|
Binks Century LEL
- MACT-compliant - non atomizing technology
- Optimum catalyzation
- External mix - no flush
- Reduces over-spray
- Low maintenance
|
|
Binks HVLP - (Air Assisted-Airless)
- Fully complies with all HVLP requirements
- Optimum catalyzation
- External mix, no flush
- Works with heavy materials
- Low maintenance
|
|
Binks LEL
- MACT-compliant - non atomizing technology
- Easy maintenance
- Internal mix
- One-touch flush
|
|
The 2001 GW gun is a lightweight, hand-held, plural component spray gun for spraying limited applications of two-component materials, such as gel-coats or polyesters. The spray gun is operated in the conventional manner. The trigger action starts, and stops, the spray of both materials simultaneously. The two materials exit separately as an atomized spray from their respective nozzles and impinge on each other approximately 6" in front of the gun (resin) nozzle. Here, the resulting turbulence insures intimate mixing.
The "base" resin is "cured" by addition of a curative (catalyst) in a required ratio. In the 2001 GW gun, ratios of approximately 10:1 to perhaps 33:1 are possible by extending the curative with a compatible diluent.
|
|
The ORIGINAL Patented Direct Impingement Mix AIR-PURGE Spray Gun for Foam and Plural-Component Coatings.
All GlasCraft dispensing systems utilize our exclusive air purge, solventless direct impingement mix, Probler or Probler P2 Guns.
The Probler has been the industry’s leading air purge spray gun since it was patented in 1974. Since then, all other air purge guns have been modeled after this industry benchmark.
With the Probler, time consuming and difficult adjustments common with mechanical purge spray guns were eliminated. Fewer adjustments meant it was much easier to set-up and simple to use and operate. GlasCraft’s breakthrough with the patented Probler spray gun actually helped applicators increase production by reducing difficult procedures and adjustments.
|
|
The Probler P2 from GlasCraft is the ultimate contractor gun!
Why?
Less maintenance, less downtime, very user friendly, and the lowest parts consumption in the business!
The NEW and Patented Probler P2 Plural-Component Spray Gun for Foam and Coating applications offers technology that is only available from GlasCraft.
The P2 has the most responsive trigger action available in the market today thanks to GlasCraft's patented dual-piston design which provides over 300 lbs. of force.
The 2-piece spray chamber and tip insert design is another GlasCraft patented technological advance which allows for more spraying uptime
The Probler P2 has lower parts consumption than any other gun available in the marketplace today!
|
|
The MACH 1SL HVLP is a lightweight, top quality, high performance spray gun. The superbly balanced forged aluminum body is ergonomically designed with a compact grip size, offering the operator extra comfort and control.
All of the spray gun's components are machined and finished to exacting tolerances using only the highest quality materials, including long life self-adjusting packings to ensure years of peak efficiency.
|
|
|
The Binks Mavrick is a high volume airless spray gun designed for FRP plural component spray applications. It features an external mix converging spray fan pattern of resin and hardner. An optional chopper attachement is available.
|
|
| ... products without information |
| |
| ... products without information |
| |
| ... products without information |
| |
... see all the products in the category
Gelcoats
|
|
Use SprayCore Coring Materials to construct composite laminates that are stronger than laminates built with balsa, PVC foams and other coring materials. The VOC-compliant sprayable syntactic is a resin-based matrix filled with multi-sized, hollow microspheres.
|
|
|
|
|
|
|
As a Freemove sail, the Torro is the perfect combination of wave, freestyle and freeride characteristics.
The conclusion of the German Surf magazine in their test report about the Torro 2008 summed it up:
“The Gun Sails Torro is directly in the middle of all these characteristics, therefore, it fits perfectly into the Freemove group.” (surf magazine 03/2008)
Early planing, manoeuvrability and outstanding speed resources are the key points of this versatile sail. The reduced boom length makes it extremely easy to handle, it feels well-balanced and offers a significantly high comfort in a wide wind range.
The Torro is equipped with a camless narrow mast sleeve which rotates very softly, the luff tension is reduced and can be easily adjusted thanks to the built in trim rolls.
The size specific batten configuration of 5 battens without tubes provide up to size 5,3 a much better handling. From size 5,7 on, the profile is supported by one tube batten for better flat water performance.
Our advice:
If you need a crossover sail which is more suited to sailing straight and performance, then we would recommend the Nexus. If you tend more towards manoeuvres and freestyle, go for the Torro.
Key facts:
Versatile sail with an extraordinary wide range of use
Optimum mixture of handling and performance
Size specific batten configuration
Best freestyle suitability in our sail range
SDM and RDM compatible
|
|
Our 2 cam freeride sail Escape was designed for this season with a reduced boom length up to 8 cm, which now results in even better handling and control.
The 2 cambers provide the sail with a deep profile which excels in early planing in low winds and effortless planing through lulls. The solid sail design provides a direct feeling. Sporty freeriders who do not shy away from cambers, will be rewarded with – compared to the Future - a bit more “race feeling” and a wider wind range without any re-trimming.
Once planing, the Escape feels very neutral in the hands thanks to its dynamically twisting top.
With the Escape, you can benefit from the advantages of a camber sail without missing handling and comfort.
Key facts:
2 New roll cams for soft rotation
New RBL (Reduced Boom Length) design for better handling
Stable centre of effort and controllability because of 3, / 4 tube battens
Solid x-ply frame ensures longevity
|
|
|
|
|
|
|
The brand-new Rapid is the new favourite sail of our sail designer Renato Morlotti for enjoying the time on the water and outrunning others after an exhausting day in the loft.
Stress free rigging thanks to the camless mast sleeve, easy feeling and performance values as a slalom sail, these are the key characteristics of the Rapid.
Renato says: “The Rapid shows a more than sporty character. Despite the slalom design it feels like a freeride sail and turns every weekend sailor into the fastest racer on the water”.
It was designed as a no cam performance sail and it combines the performance of the Cannonball with the handling of the Future.
7 battens and a higher profile tension provide the sail with incredible acceleration abilities and a superior speed for a no cam sail.
The Rapid is ideal for fast freeride or slalom boards and give a relaxing feel during all manoeuvres.
Key facts:
Camless high performance sail with freeride handling characteristics
7/4 Cross batten concept for maximum profile stability
Very wide range of use from low to high winds with one trim only
RBL: Reduced Boom Length for more control and easy handling
Solid x-ply frame ensures longevity
|
|
Unlimited speed/slalom
The 2009 Mega XS line was completely updated by Renato Morlotti in several important areas.
Sizes 4,7 and 5,2 are now equipped with a special camber set for RDM masts. With this new feature, the aerodynamics at high speeds are significantly improved. All other sizes use our SDM (standard diameter mast) cambers.
The important slalom sizes from 6,8 to 8,1 have a new body shape and are equipped with an 8-batten configuration which excels with much better control in the upper wind range.
The use of new roll cams makes the sail rotation softer and also the location of the cambers when rigging is much easier.
The Mega XS is the ultimate speed/slalom experience for committed speed sailors and competition racers.
Key facts:
Size specific batten configuration 7/5 or 8/5 in cross batten concept
4 New roll cams for soft rotation and easier rigging
Aerodynamic, wide mast sleeve shape out of Lektra
|
|
|
|
|
|
|
The Cannonball is the perfect partner for committed fast sailors and GPS racers who require a maximum of performance on all courses. In comparison to a pure race sail, the Cannonball is easier to handle and trim. The use of new roll cams makes the rotation softer and the sail rigging easier.
After sleeving the mast and applying about 75% of the downhaul, simply roll the cams onto the mast.
A medium-sized mast sleeve, 3 cams, a relative short boom and 7/8 battens in the cross batten concept guarantee planing power, outstanding acceleration and a top high end speed.
The harmonic shape with a deep profile and a distinctive loose leech gives an extra portion of power in low wind area and outstanding stability, even in the upper wind limits.
Key facts:
Reduced Boom Length for compact handling
7/4 or 8/41 batten configuration in cross batten concept
Airfoil Leech Design for more control in a wider wind range
2 Clew eyelets for more flexibility of boom position in different conditions
Medium-sized mast sleeve combined with deep profile for maximum early planing power
|
|
|
|
|
|
|
Goodbye Hammer, welcome Steel, the new radical wave sail in the Gun Sails collection.
The Steel supports the pure waveriding style: easy to handle, stable, absorbs the gusts and fast reacting.
The new shape of the Steel concentrates more on the middle and lower area and the batten configuration was also re-designed. The New Steel is a little deeper than the Hammer and the centre of effort is positioned slightly nearer the mast, which makes the sail more neutral, eliminates any back hand pressure and extends the range of use in high winds.
A new panel layout with a robust Dacron luff panel offers a perfect on/off feel.
With the wider clew trim range, you can get a deeper profile and thus get more performance in onshore conditions or on low wind days.
A new feature is also the two clew eyelet concept which give you scope for an individual tuning: opt for a more direct or rather soft feeling.
Due to the fact that the construction and equipment of a radical wave sail are important purchase criteria, we have attached great importance to these points.
All sail windows are constructed in reinforced x-ply materials. Potential weak spots are protected by seam coverings or rubber tubes. Solid applications improve the frame. A “lightweight construction” is definitely not our style.
Key facts:
100% x-ply construction for maximum demands
Faster power on/off for radical wave rides
A repositioned centre of effort avoids back hand pressure
Better gusts absorption thanks to Dacron mast panels and less pre-tension
SDM and RDM compatible
|
|
|
|
|
|
|
For 7 years, the Wave MC was a reliable partner for all power wave sailors and was among our top seller products. Now the time has come for a new design and new features for waves.
Power Wave, this means more drive and power than a radical wave sail whereas it offers maximum control in all conditions.
Our sail designer Renato Morlotti focused on lightness and user-friendliness.
This can be found in a new mast sleeve cut with less bending and new materials, which significantly ease rigging and trimming.
The new Transwave aspect ratio has been re-worked making the sail reaction very fast and giving it an extra turbo power supply for all drives and turns in the waves.
The previous rigid luff panel has been replaced with a dacron panel. This results in reduced panel tension, compared to its forerunner model, the Wave MC, which improves substantially the comfort, cushioning and power on/off.
Two clew eyelets give you a wide range of individual tuning: Opt for a rather direct (upper eyelet) or soft (lower eyelet) feeling.
Of course our new wave sail is equally at home with RDM and SDM masts.
An extreme durability and longevity are guaranteed by the 70% x-ply and complex reinforcements. Renato Morlotti calls it "a pure power wave machine for all wave spots in the world”.
Key facts:
Constant power development for very good planing performance
A more open sail top for more stability and control in high wind conditions
70% x-ply construction for extreme conditions
Better gusts absorption thanks to Dacron mast panels and less pre-tension
SDM and RDM compatible
|
|
|
|
see the results for the following category : 
