|
|
These hatches are made of a horizontal and vertical sliding part in one construction.
The construction of the horizontal part is similar to the sliding hatch. For the vertical part, two options are available:
Simple washboard - usually built in wood by the yard to fit the Rondal frame
Counterweight assisted vertical hatch with garage
Perspex or glass panels can be incorporated in the horizontal and vertical sliding parts.
|
|
- RINA approved watertight door
- Painted aluminium frame
- Siliconic polymeric gasket water resistant
- Special painting to resist to corrosion
- Eight closing locks
|
|
- Pantograph electric side door
- Rapid manual discharge in case of failure
- Device to prevent crushing
- Easy to regulate at the very first installation and along all its life
- Water resistant
|
|
Systems of closing carried out on specific request of the customer
Manual, hydraulic or electronic movement
Resist the bad weather
|
|
model 2B20
Manual door with a glazed panel that slides open into the superstructure of the boat and a large electronically controlled descending frameless window equipped with limit sensors and anti-crush tactile seals fitted with 8 mm European grey monolithic tempered glass.
|
|
model 2T71
four panels
Curved four-panel manual door with two central sliding panels and a fixed panel at each side in AISI 316 stainless steel fitted with 10 mm tempered glass and one model 7530 handle as standard. Designed for external installation, custom sizes are available upon request.
|
|
model 2A30
with three panels
Manual door in four sections: two fixed, one sliding and the fourth fixed incorporating a sliding window constructed in highly polished AISI 316 L stainless steel. Designed for external installation and fitted with European grey 8mm monolithic tempered glass. Custom sizes are available.
|
|
model 2536
ample door opening space
Manual sliding hatch with two moulded panels on the external wall of the compartment. Custom sizes are available.
|
|
model 2340
Concealed or L hinges
Single hinged alloy water tight door with an upper panel in 19 mm stratified glass. All hinges and handles are supplied in AISI 326 stainless steel. Proprietary custom sizes and colours are available.
|
|
model 2359
Manual pantograph opening watertight hatch door with a polished AISI 36 stainless steel frame and unfinished door panel, a 4 point sealing system and sensor alarm. For models with a prominent profile customers are advised to use the external panel supplied by the shipyard to make matching easier. Filling and painting should also be performed by the shipyard. Custom sizes are available. An optional lockable version of this door is also available upon request.
|
|
model 2361.00
Cockpit side door with manual pantograph opening and a four-point internal dogged sealing system. The door is fibreglass coated and is fitted with 10 mm stratified safety glass.
|
|
|
|
|
|
|
model 2147
Automatic door curve for income hall with mechanism patented for lateral held draw latch to of water to four before of which two flowing ones it centers them to opening contrapposta and two fixed ones. Realized in stainless steel AISI 316 painted white man standard or with varnish and colors at call personalized. The inner profiles of the door are predisposed for the installation of a having flooring thickness 12 milimeter and possibility of advanced crosspiece with personalized dimensions. Thickness of 25,5 stratified crystals milimeter color "Europe gray". It comes supplied completes of handle, commando opening and draw latch with external and inner pulsantiera, battery of emergency, manual uncoupling for opening door in case of lacked feeding from battery and photoelectric cells mounted on the inner chassis. Upon request it can be supplied of pulsantiera for income to combination, commando for opening door through radar and contact for signalling opened door, push-button of opening mounted on a anta flowing.
|
|
model 2602
Stern hatch with manual raising system in AISI 316 stainless steel for access to the engine room or captain’s cabin. (Exterior supplied unfinished leaving the choice of coating to specific customer requirements).
|
|
|
Full tempered safety glass in marine grade 316L stainless steel or aluminum with sliding insect screen for comfort. 6063 mechanical frame construction with adjustable roller track system. Weather resistant powder coatings are available in black, white or sparkling silver.
|
|
|
Sliding hatch AISI 316 stainless steel, tempered glass neutral color (other colors on request). Size on demand
|
|
|
Bi-fold and sliding companionway doors are engineered with heavy punched mechanical joints for added strength. The aluminum frame is finished in a weather resistant polyester powder coating. Taylor Made® tempered safety glass or acrylic panels are optional, with custom shapes, sizes, and designs available upon request. EPDM sponge gaskets and vinyl for watertightness. Available with stainless trim and sliding insect screens.
|
|
|
Rectangular watertight door Peraluman light alloy 4.4, standard size 600 x 1600 mm, inner and outer leaflet, 4 auction closing, adjustable bushings. Other sizes on request
|
|
|
Taylor Made® entry doors feature 6063 mechanical frame construction. Engineered with an adjustable roller track system, with drain channels and water dams in conjunction with our EPDM sponge gaskets, vinyls and weatherstripping for ensured watertightness and reliable fit. Taylor Made® weather resistant polyester powder coatings are available in black, white or sparkling silver. Custom sizes, shapes and designs for OEM boatbuilders. Sliding framed insect screen door available. Inside/outside locking feature is standard, secondary keyless latch is optional. Taylor Made® tempered safety-tinted glass for privacy.
|
|
|
WATER-TIGHT SHUTTER Water-tight shutter with a completely manual driving, totally built in stainless steel, with double operation handwheel "internal and external". The shutter distinguishes itself for a vertical opening system. The special design of the hinges allows a remarkable opening angle for a better access to the entrance space. Two gas pistons completely in AISI 316 make it lighter and increase its ergonomics. The shutter is provided with customized dimensions.
|
|
Parema can realize inside or outside doors: in both cases the product is designed in collaboration with the shipyard, in order to satisfy every need. The doors are available in different models: flat or curved, from one to four panes, with or without insect screen.
The material used can be light alloy of aluminium UNI 6060, stainless steel AISI 316 for the frame and Plexiglas or thermic tempered glass for the transparent surfaces.
Special waterproof gaskets are applied, as well as aluminium or stainless steel customized handles.
|
|
Nemo have been producing marine doors for more than 20 years by now.
All doors are custom-made, ready for installation with very short assembly times (the new "Evolution" model,thanks ti its built-in engine, takes about 20 minutes to be installed).
The door structure is in laminated fiberglass internally strengthened by bronze-aluminium plates. The frame and various accessories are in aluminium 6061, while other components are in stainless steel 316L. The patented cycle painting and the insulation between materials of different types ensure excellent protection against saline corrosion; client can specify the colors, both on the inside and outside.
Special pins ensure the correct pressure on an innovative seal which will not be deformed over time, making them exceptionally watertight.
|
|
FREEMAN MARINE doors are built rugged with precision working components of marine aluminum, stainless steel and other quality materials. The precise fit and adjustable dogging of a FREEMAN MARINE door, along with its positive doorjamb seal make it your best choice for new construction and refit installations alike.
Solidly constructed and fully insulated, double-skin panel doors are suitable for high traffic access installations for the pilothouse, galley, engine and staterooms, salon, main deck, lazarette, transom and elsewhere. Workboat, fish boat, and yacht alike rely on FREEMAN MARINE to provide superior construction at an affordable price.
Door styles available include various panel configurations, dog arrangements, lock sets/passage sets, keying options, window sizes and styles and corner shape.
|
|
FREEMAN MARINE'S full selection of fabricated doors assures the right door for the right location. These heavy-duty, watertight and weathertight doors are designed for continuous, trouble-free service and oceangoing duty. All doors are made to order, to assure the customer of the correct size door, whether for new construction or refit.
Fabricated doors are normally sold by the clear-opening sizes. However, they can also be ordered by the overall flange-to-flange sizes, or to fill an existing opening. If an old door is being replaced, advise us of the bulkhead opening, measured after the old door AND frame are removed, and we will provide a door to fill that opening.
These doors install by welding or bolting the flanged frame to the bulkhead (half of the flanged frame width normally extends into the bulkhead opening, allowing room for frame wedges and dog operation).
|
|
|
|
|
|
|
The Ultimate Exterior Sliding Door Solution developed by Rondal over the past two years was designed entirely in-house. The doors are electrically powered, feature inflatable seals and are available in both flat and curved styles. The doors also have the option of being single or double leaf with a choice of window panels. Each door is supplied together with a frame and control system as a plug-and-play unit for easy installation in yards.
The doors can also be manufactured in various materials including aluminium, stainless steel or composite. A yard may also choose to make a wooden door to fit into a Rondal frame. Safeguards are applied to prevent accidents and all doors will be approved as ‘weather-tight’ by certification authorities, such as Lloyd’s, ABS, DNV and GL.
The characteristics of the Ultimate Exterior Sliding Door clearly appeal to both technical staff and interior designers alike.
Special features include:
- minimal space required for
mounting
- quiet operation
- low power consumption
- 40 VDC rotary motor with reducer
- encoder for determination of door
position
|
|
model 2A92
with incorporated plasma screen
Automatic two-panel patio door in AISI 316 highly polished stainless steel and bronze tinted 10mm thick tempered glass. The two side panels are fixed while the centre panel slides from left to right. The left panel is slightly wider than the others and can accommodate a plasma screen (supplied by the customer) protected by a clear pane of glass; if requested the screen can be made to rotate 90° inwards towards the interior of the salon making viewing more pleasurable and also facilitating any possible maintenance. Custom sizes are available. For the manual version of this door please see model 2092.
|
|
|
|
