|
|
These fuel tank are constructed of High-quality and UL approved.
The 25L (6.6-gallon) tank includes cap and fuel level gauge. The 12L (3.1-gallon) tank has not fuel level gauge.
|
|
See-thru tank makes fuel level visible from any angle. Tank includes vented cap, filtered pick-up tube, and gas line coupling for 1/4" NPT fittings. 21" L x 11-1/2" W x 9-1/2" H. Adapts to all outboard engines. Massachusetts Fire Marshal Approval Number PC-156. Meets both ABYC and CSA.
|
|
Designed to store fuel or drinking water.
Thanks to its slim shape it is easy to stow and it occupies a minimum of space.
High-density polyethylene.
Neutral colour tank for the storage of drinking water.
Grey tank for the storage of any kind of fuel.
|
|
These fuel tank are constructed of High-quality and UL approved.
The 25L (6.6-gallon) tank includes cap and fuel level gauge. The 12L (3.1-gallon) tank has not fuel level gauge.
|
|
The technique of storing and transporting liquids through the use of flexible tanks has many advantages :
· lightness
· handiness
· adaptability
· fiability
NAUTA® FLEXIBLE TANKS provide many advantages over rigid tanks and have therefore, become very popular with both yacht-builders and boat owners.
Each of these tanks uses an extremely rugged 935-dtex nylon fabric, coated on both sides with a neoprene / nitrile compound.
Heavily lapped seams are inside-reinforced with a “doubler” to provide extra strength. All NAUTA® tanks are vulcanised to assure leakproof panels and seams for years of trouble-tree service.
Because of their flexibility and the NAUTA® range of sizes, these tanks can fit into almost any space, especially those odd-shaped places that would otherwise be wasted.
NAUTA® tanks are very easy to work with. Several for water and holding are available with fittings already installed. But NAUTA® ‘s construction allows custom placement of fittings to suit your particular requirements and makes it simple to install them ( See Fittings for Nauta Flexible Tank )
|
|
|
CE marked fuel tanks suitable for petrol and diesel. Manufactured from High Density Polyethylene. These tanks are red in colour and come complete with inspection hatch, filler cap with vent and an 10mm fitting with pickup pipe for fuel feed. A fuel return may also be fitted. If you prefer there is a separate vent fitting located next to the feed. This is a 1/2" hose tail.
|
|
Chrome-plated zinc vents with spark-proof screened holes.
All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations.
|
|
Each harbor has in heart to reduce the risks of pollution,
of contamination, of fire or explosion related to the filling
fuel tank.
Often, the fuel is rejected into the water of the harbor at the time
filling, is by the vent of the tank or directly
over the bridge.
It is completely logical to take precautions in order to avoid discharges, not only to protect the environment
but also from an economic standpoint.
STAINLESS SYSTEM 316 L Reference: SCI02002 - SCI02003
- 1 Reserve supplements of 2 liters with float
- 1 Control box with cable of 2.50 m (delivered without piles)
- 1 Support case of arrangement
- 2 Collars 25/40 mm
- 1 Sticker "with Ecoplein I preserve the environment"
- 1 Note of assembly and use
Dimension of the reserve:
120 mm X 80 mm X. 220 mm
Exit connection 1/2 GASES Female ref.: SCI02002
Exit connection 1 ' GAS Female ref.: SCI02003
Allows various diameters of pipes, delivered without
grooved tail.
AS A TANK FUEL OIL ONLY HAS
|
|
Each harbor has in heart to reduce the risks of pollution,
of contamination, of fire or explosion related to the filling
fuel tank.
Often, the fuel is rejected into the water of the harbor at the time
filling, is by the vent of the tank or directly
over the bridge.
It is completely logical to take precautions in order to avoid discharges, not only to protect the environment
but also from an economic standpoint.
POLYAMIDE Reference SYSTEM: SCPYL001
- 1 Reserve supplements of 2 liters with float
- 1 Control box with cable of 2.50 m (delivered without piles)
- 1 Support case of arrangement
- 1 Support holds with collar 510 mm
- 2 Collars 12/20 mm
- 1 Sticker "with Ecoplein I preserve the environment"
- 1 Note of assembly and use
Dimension of the reserve:
Diameter 135 mm Height 280 mm
For a pipe of exit towards the vent of 14 mm
AS A TANK FUEL OIL ONLY HAS
|
|
Each harbor has in heart to reduce the risks of pollution,
of contamination, of fire or explosion related to the filling
fuel tank.
Often, the fuel is rejected into the water of the harbor at the time
filling, is by the vent of the tank or directly
over the bridge.
It is completely logical to take precautions in order to avoid discharges, not only to protect the environment
but also from an economic standpoint.
POLYAMIDE Reference SYSTEM: SCPYL002
- 1 Reserve supplements of 2 liters with float
- 1 Control box with cable of 2.50 m (delivered without piles)
- 1 Support case of arrangement
- 2 Collars 12/20 mm
- 1 Sticker "with Ecoplein I preserve the environment"
- 1 Note of assembly and use
Dimension of the reserve:
100 X 100 mm Height 280 mm
Assembly of the Vertical or Horizontal reserve
by directing the following float locates
Exit connection 1/2 GASES Female
Allows various diameters of pipes, delivered with tail
grooved for diameter 16 mm
FOR GASOLINE AND FUEL OIL
|
|
| ... products without information |
| |
... see all the products in the category
Fuel tanks
|
Water tanks suitable for drinking water.
Manufactured from High Density Polyethylene. These tanks are green in colour and come with an inspection cover. A hatch, bought separately, provides all the fittings necessary for water filling, venting and extraction.
Capacities and various regular shapes available from 32 to 107 litres
|
|
| ... products without information |
| |
Provides constant pressure water supply to Carbonators, Ice Makers, Non-carbonated drink dispensing valves, Coffee/tea brewers, FCB/frozen drink machines, Moist-heat food holding cabinets.
|
|
|
Reduce cycling pulsation and pressure spikes, increase the life of your pump — and even save battery power. SHURflo accumulator tanks are NSF certified. Easily handles pressure requirements from 20 psi [1.4 BAR] to 125 psi [8.8 BAR].
|
|
• Integrated pump and tank system
• May be mounted vertically or horizontally
• Flow rates up to 4.5 US Gallons/min (17 Lires/min)
|
|
|
The most advanced system available, this fully-automatic, quiet unit pumps tasteless, odorless water smoothly and consistently. Self-priming, corrosion-resistant and NSF certified tank. The result is longer life, reduced cycling, smooth flow and less wear on the pump. As always, the pump can run dry without damage.
|
|
|
This new medium demand unit from Johnson Pump consists of an Aqua Jet WPS five-chamber diaphragm pump integrated with a pre-pressurised 2 liters accumulator tank and inline strainer. The unit's design allows for either vertical or horizontal installation.
|
|
Two self-priming pumps pressure boosting plant. Noiseless running, suitable for the distribution of the pressure water. Membrane tank made of inox.
Separated motorpump groups; two adjustable differential pressure switches. Pump casings made of bronze; special brass alloy made impeller, axis AISI 316, carbon ceramic mechanical seal.
|
|
|
The Rhine current drinking water plant RH 028 is suitable for occupation ships and large yacht ones. Equipped with a calmly running, sucking in, single-step centrifugal pump. It produces a pressure up to 3 bar. The pump made of brass and high-grade steel is manufactured. The plant consists 22 of an l high-grade steel pressure vessel, pump with adjustable push button switch and Verbindungsschlauch with check valve. The pump can be dismantled by the tank and set up separately. On request the plant is available also with second and third compression phase, so that a pressure up to 5 bar can be achieved.
|
|
| ... products without information |
| |
|
|
see the results for the following category
