|
|
Racor now offers replacement filters for marine applications. These filters are direct replacements for the intake air filter portion of vairous brands of air filters/silencers
|
|
Cost Effective Visual Inspection
Cost effective designs for on engine or remote mounting. Complete assemblies or direct engine spin-on filters. Available with see-thru or all metal bowls.
High Capacity
Hand operated fuel priming pumps are integral to many Racor diesel spin-on series models. A feature that allows for the removal of unwanted air from the filter and the engine fuel system.
Environmentally Friendly
Engeineered polymer bowls are reusable, impact-resistant and virtually indestructible. When it's time for service, only the filter element is replaced -- the see-thru bowl and drain valve assembly are reused. The long life-cycle of the bowl saves money and reduces the environmental impact through disposal fo less material. Use metal bowl versions for inspected or commerical vessels.
Easy Upgrades
See-thru bowls provide connection ports for upgrades which enhance engine performance and reliability. Powerful in-bowl heaters can be added to improve operation in colder climates and electronic sensors alert the operator to drain the water in the bowl.
|
|
Legendary Diesel Filtration
When engines demand heavy duty, high capacity water separation and fuel filtration, the Turbine Series is the most complete, efficient and reliable engine protection you can install. Symbolizing Racor's continuing commitment to the science of filtration, the Turbine Series has established its position as the filter/separator often imitated, but never equaled. Models which include an aluminum bowl or staineless steel shield meet ASTM FS1201 certification, are UL-Listed, American Bureau of Shipping, Veritas, Det Norske Veritas, ISO 10088 and U.S.C.G. accepted. For severe service, all-metal bowls should be specified.
|
|
Being on the water is fun, having water in your fuel is not. And more than ever today's high performance gasoline inboard and outboard engines require clean, dry fuel. Standard spin-on filters simply don't offer the improved features and peace-of-mind that come with quality Racor fuel filter/water separators.
Clear contaminant collection bowl with drain valve for outboards
Ten micron Aquabloc media
Long life with 98% efficiency
Corrosion-resistant construction
Metal bowl units inboard powered boats meet 33 CFR and USCG standards
Meets ABYC standard H-23
|
|
Reservoir breather filters provide precision hydraulic components with special protection against wear particles and destructive moisture. The use of reservoir breather filters is especially critical in high humidity areas or where moisture is present near hydraulic systems. Racor reservoir breathers contain a unique filter media which removes both dirt and moisture. The spin-on design provides ease of service. Consult factory for details.
|
|
Now, engine owners have the opportunity to combine the Racor LFS with a highly efficient, environmnetally safe Bypass Oil Filtration System.
The Racor Bypass Oil Series removes dirt, varnish, ash, tar, soot and other contaminants that full-flow filters cannot remove from your engine's oil. The system also removes condensed water, which forms damaging acids if it remains in the oil.
The Bypass Oil Series filter element is 1 micron filter element. With surface filters, particles tend to stack up on a single plane, thereby "loading" the filter and cutting off flow. The Bypass Oil Series filter element is a "depth" filter trapping different size particles at varying depths within the element, so loading is virtually eliminated.
Extended oil changes are possible with a Racor Bypass Oil LFS and regular oil analysis. Analysis provides important information about the condition of the oil and when it needs to be changed. It eliminates relying on "recommended change intervals" which are based on standard, full-flow filters.
By extracting samples of engine oil at predetermined intervals, a record can be established based on the actual condition of the engine and the oil.
|
|
|
Pennzoil® air filters remove dust and dirt from the intake system before they can reach the engine. Recommended by Pennzoil® for virtually all passenger cars and light trucks, Pennzoil® filters meet or exceed automotive manufacturers' requirements.
|
|
Many people are totally unaware of the problems that water in fuel can cause. Droplets of water in fuel are the ideal carriers of dirt and rust through narrow pipes. One small drop of water may cause blockage of the fuel pump, cutting off the fuel supply. With diesel engines it is then very difficult to re-start the engine. Water may also be the cause of rust in the pump or in the injectors, resulting in blockage and expensive repairs. Fuel tanks in boats often contain some water, which seeps in when filling, or which is formed by condensation. Apart from this, a fuel tank in a boat often contains dirt, which is too much for just the primary fuel filter of the engine to handle. A VETUS separator/fuel filter is therefore certainly no luxury, but a necessity. THE WS 250 AND WS 750 WATER SEPARATORS/FUEL FILTERS ARE DESIGNED FOR APPLICATION WITH DIESEL FUEL ONLY. THE MODELS WS 180 AND WS 720 ARE SUITABLE FOR BOTH PETROL AND DIESEL FUEL.
The VETUS water separators/fuel filters type WS 180, WS 250, WS 720 and WS 750 consist of the following components:
|
|
|
Pennzoil® oil filters help remove damaging dirt and grit from oil, enabling it to clean, cool, seal and lubricate the engine more effectively. Recommended by Pennzoil® for virtually all passenger cars and light trucks, Pennzoil® filters are designed to exceed industry average efficiency ratings, and to meet or exceed automotive manufacturers%u2019 requirements.
|
|
The Racor Fuel Filter Funnel (RFF)
family is a new heavy-duty, fast-flow,
filter-in-a-funnel that separates damaging
free water and contaminates
from gasoline, diesel, heating oil, and
kerosene.
The new RFF family of products are
capable of removing free water and
solids down to .005 or .003 inch and
allows you to visually inspect the integrity
of your fuel supply as you refuel.
Dirt and water are practically unavoidable
in stored fuel, causing microbial
growth, corrosive acids, electrolysis,
and rust. These contaminants
can plug filters, corrode components,
decrease efficient combustion,
and can cause engine shutdown
or system failure.
|
|
Eliminate Fuel Vent Line Overflow During Refueling
Next time you fill up, watch your fuel vent line. A typical refueling will send up to a half gallon or more of fuel spilling overboard. Fuel spillage is not only expensive, it's absolutely deadly to fragile lakes, rivers and waterways. USCG and other regulations prohibit the discharge of oils including civil and criminal penalties.
Installed in the fuel tank vent line, the Racor Fuel/Air Separator efficiently separates air from fuel forced into the line. Air is vented, and all fuel is returned to the tank. The Fuel/Air Separator captures fuel normally discharged due to agitation and thermal expansion up to 2.4 PSI. It also eliminates damage to expensive striping and labels and protects finishes from fuel stains. The unit is maintenance free -- there's nothing to rust or corrode.
The Racor Fuel/Air Separator fits neatly into your vent line, actually replacing a section of the line. One Fuel/Air Separator unit is required for each vent line, both models fit 5/8" vent lines. Fittings are included.
|
|
• Prevents unnecessary pump breakdowns caused by particles in the water.
• Transparent housing allows instant inspection.
• Screw off top allows quick in-place cleaning and removal of debris.
|
|
All wash-down and water-system strainers are designed to prevent debris and other particles from damaging the pump or passing through the system to the final outlet. The new PUMProtector™ inlet and universal strainers from Johnson Pump are also designed to make your life simpler.
|
|
It’s all about convenience. Making your boating experience as comfortable as if you were at home. SHURflo’s newest products are designed to do just that. For example, take our Waterguard filtration products. A full line of exceptional, NSF listed products that deliver clean, great tasting water.
Installation is easy and operation is flawless.
|
|
|
Sherwood Raw Water Strainers utilize a durable non-corrosive contruction and easy in-line cleaning for the engine cooling system, bilge systems, and bait well circulation. For further information click on the further details button.
|
|
|
Water filters prevent pump and cooling exchangers from blocking. Transparent plastic cover ease service and washing of the element. Must be installed over the waterline.
|
|
- Provides clear, fresh drinking water
- Removes unpleasant tastes and odours
- Contains silver which inhibits bacterial growth
- Slim and compact
- Easy to install and maintenance fee
- Will last one full season or 4,500 ltrs (1,188 US gals)
- New improved design can be mounted horizontally
|
|
The U.V. systems in stainless steel AISI 304 (or AISI 316 if required) with high intensity low voltage U.V. lamp can reduce 99.9% bacteria and viruses in the fresh water.
Suitable for home, commercial and industrial use, they are equipped with transformer 220/240 Volt a.c. 50 Hz to 24 Volt d.c.
|
|
The HFL Exhaust Water Separator, EXOSILENT, is manufactured for either a 40mm or a 50mm diameter wet exhaust system. The purpose is to separate the exhaust emmissions into dry exhaust and water. The exhaust separation will then allow a discharge of the dry exhaust above the water line and the seawater discharge either above or below the water line.
The EXOSILENT therefore overcomes the usual annoyance of wet exhaust borne noise relating to conventional systems. The EXOSILENT can be fitted to almost any craft providing certain criteria can be met. The gate valve "E" must be installed to allow setting of the correct seawater discharge rate. It is also important to remember that there is a limit to the depth below the water line "C" at which the seawater can be discharged. Furthermore note that there is a minimum height "D" required to make the separator work at all.
|
|
| ... products without information |
| |
Stops odors from escaping through holding tank vent.
Contains odor-removing filter materials to keep your boat smelling clean and pleasant.
Each filter is good for an entire season, and is easily replaced for a fresh start.
|
|
The HFL Exhaust Water Separator, EXOSILENT, is manufactured for either a 40mm or a 50mm diameter wet exhaust system. The purpose is to separate the exhaust emmissions into dry exhaust and water. The exhaust separation will then allow a discharge of the dry exhaust above the water line and the seawater discharge either above or below the water line.
The EXOSILENT therefore overcomes the usual annoyance of wet exhaust borne noise relating to conventional systems. The EXOSILENT can be fitted to almost any craft providing certain criteria can be met. The gate valve "E" must be installed to allow setting of the correct seawater discharge rate. It is also important to remember that there is a limit to the depth below the water line "C" at which the seawater can be discharged. Furthermore note that there is a minimum height "D" required to make the separator work at all.
|
|
| ... products without information |
| |
Recommended for Amazingly fast same day filling and painting Repair of gelcoat blisters, damage and cracks
Main benefits Sandable for painting within 30 minutes Multipurpose use on all areas Long lasting and non-shrinking
Pack size 130ml, 300ml
|
|
|
|
