|
|
Hamworthy Serck Como´s Fresh Water Generators are defined by the following categories:
* Multiple Effect Desalination
* Multi Stage Flash - Cruise
* Plate Type Evaporators
* Re-hardening Filters
* Rising Film Evaporators
* Submerged Tube Evaporators
* UV-Radiation
* Water Treatment
|
|
The cell is made of titanium with a platinised anode which makes up the most efficient system for guaranteed operation. Solidly constructed with a modular design that allows full access to all its parts, the Osmomar® fresh water generator is an efficient alternative to distillation generators.
We would emphasise the triple filtration system and the ceramic high-pressure pump that guarantees long lifetime, with adapted maintenance cycles.
|
|
RWO reverse osmosis seawater desalination systems are designed for independent and reliable fresh water supply onboard ships and offshore facilities. The reverse osmosis process is ideal for fresh water generation - being easy to operate, economical and producing excellent water quality. RWO's SRO product line covers a wide range of capacities and accessories to meet the needs of passenger, merchant and navy vessels as well as the requirements of offshore applications.
Advantages at a Glance
Complete package, skid mounted systems for least amount of onboard installation work.
All required capacities
Pre-tested in our workshop testing facilities
Perfect water quality
Compact design
Easy to install and operate
Designed for automatic operation
No or little maintenance during operation
Design accredited to European or American standards
Class certificates available
|
|
The PW Series/R.O. Desalination Systems are the preferred choice for some of our most discriminating clients (such as the United States Navy, the United States Coast Guard and the Cousteau Society...to name a few) and have proven to be amongst the most reliable units on the market.
We owe our success to skilled craftsmanship, the use of quality, non-corrosive materials, and to our thirty one years of reverse osmosis experience. The PW Series is built for a lifetime of use in oceans around the world.
The PW Series are commercial duty units which are commonly used in 24 hour/day, 7 day/week operation. These systems are designed to provide the best performance and longevity under the most rugged conditions.
The PW systems are available in two styles: framed and modular. The framed unit is the most convenient to install: simply connect three hoses, run the power and you%u2019re in business. The modular system allows the user freedom to install components where space permits.
|
|
The PW Series/R.O. Desalination Systems are the preferred choice for some of our most discriminating clients (such as the United States Navy, the United States Coast Guard and the Cousteau Society...to name a few) and have proven to be amongst the most reliable units on the market.
We owe our success to skilled craftsmanship, the use of quality, non-corrosive materials, and to our thirty one years of reverse osmosis experience. The PW Series is built for a lifetime of use in oceans around the world.
The PW Series are commercial duty units which are commonly used in 24 hour/day, 7 day/week operation. These systems are designed to provide the best performance and longevity under the most rugged conditions.
The PW systems are available in two styles: framed and modular. The framed unit is the most convenient to install: simply connect three hoses, run the power and you%u2019re in business. The modular system allows the user freedom to install components where space permits.
|
|
|
|
|
|
|
The SW Series RO desalination systems are designed for rugged use in harsh environments where a large quantity of potable water is required. Typical installations are Offshore Rigs, Work Camps, Oceanfront Resorts, or Cruise Ships.
Each SW unit comprises a single skid installation with two complete, independent RO systems. The two trains can both run or can be operated on a duty/stand-by basis.
Village Marine Tec. relies on 30 years of experience supplying RO equipment to the Commercial and the Military market. Top quality components manufactured in-house provide unsurpassed corrosion resistance and simple operation.
Special Features:
%u2022 24,000%u201336,000 GPD Unit Capacity
%u2022 Exclusive corrosion resistant Titanium Head 5 Plunger Pumps
%u2022 316 Stainless Steel high pressure regulating valves
%u2022 Corrosion-resistant FRP pressure vessels
%u2022 All Corrosion resistant hardware and fasteners
%u2022 Backwashable media filters on skid
%u2022 Option FRP piping & Polypropylene Valves
|
|
RWO reverse osmosis seawater desalination systems are designed for independent and reliable fresh water supply onboard ships and offshore facilities. The reverse osmosis process is ideal for fresh water generation - being easy to operate, economical and producing excellent water quality. RWO's SRO product line covers a wide range of capacities and accessories to meet the needs of passenger, merchant and navy vessels as well as the requirements of offshore applications.
Advantages at a Glance
Complete package, skid mounted systems for least amount of onboard installation work.
All required capacities
Pre-tested in our workshop testing facilities
Perfect water quality
Compact design
Easy to install and operate
Designed for automatic operation
No or little maintenance during operation
Design accredited to European or American standards
Class certificates available
|
|
Fontemar® generators are the only ones on the market in which the structural elements and boiler are manufactured entirely from AISI 316-L stainless steel, which increases their useful lifetime by more than 40% and also allows rapid repairs onboard the ship.
The compact Fontemar® design adapts to the space requirements of the engine room.
|
|
Hardness in water is caused by the ions of calcium and magnesium.
The hardness of the water is of prime concern for many technical applications because of its scale-forming tendencies.
For this reason, some water users on board ship need softened water, e.g. hot water circuits, laundry water, boiler feed water, cooling water...
And some need even more, i.e. a higher degree of demineralisation, than evaporators, Reverse osmosis or softeners may provide. This is than achieved by an Ion Exchanger plant.
For both, softener and Demineralisation units, RWO has got the right solution:
Skid mounted units in a compact, marine suitable design
chemical saving processes
reliable and operations safe equipment
electronically controls for automatic," hands-off " operation
all for a very competitive price
|
|
|
|
|
|
|
Feature
- Applicable CODE
Every nation's CODE including ABS, LR, DNV, GL, BV, KR, NK, RINA
- Applicable material.
CARBON STEEL, SUS, TITANIUM, CU-ALLOY etc.
- Max. fresh water quantity.
Shell & Tube : 50Ton/day, Plate type : 80 Ton/day, Muilti Stage : 1500Ton/day, 16~24stage
Fresh water generator is an equipment to produce fresh water by using sea water and is roughly divided into low pressure evaporating type and reverse osmosis type.
Most of merchant ships are adopting low pressure evaporating type to produce fresh water by using steam or jacket water, which is waste heat source from Engine and F.W.G. is approximately divided into Shell & tube type and plate type.
We manufacture shell & tube type F.W.G. with our own technology, and produce plate type of F.W.G. under agreement with Sondex in Denmark.
S.W. is vaporized under vacuum by extra heat source and salinity is percolated from the vaporized S.W. and fresh water is gained by condensing them, while, it is necessary to maintain salinity as not to exceed 10ppm.
F.W.G. consists of vaporizer, condenser, demister, salinometer, distillate pump, ejector and steam injector.
|
|
High range equipments are suitable for installations with a high demand for water by crew members or ship facilities. We manufactures compact units with open frames to make maintenance easier, having all necessary elements assembled and including more accessories. Thanks to the big number of accessories we know how the equipment works.
High range includes AQE-30, AQE-60/35, AQE-60 and productions are from 1000 up to 4200 l/h.
|
|
Small range equipments are reliable and compact, they combine a whole range of features and they are suitable for ships with limited space and a low demand for water.
In spite of having a small size they produce top-quality freshwater with a low electrical consumption.
Small range includes AQE-2, AQE-4 and AQE-6 and productions are from 67 up to 200 l/h.
|
|
Medium range equipments units have full- automatic working.
All the assembled elements are included.
Medium range includes AQE-10, AQE-15 and AQE-18 and productions are from 300 up to 650 l/h.
|
|
It is essential to know the amount of available water per day for its treatment as well as the required water quality for any kind of irrigation where it is going to be used.
In systems where waste heat is used to heat water, evaporators could be applied to desalinate that water. With respect to salt removal, water production process using evaporators obtain water of higher quality than those using reverse osmosis systems.
Any heat source (solar, biomass, diesel thermal power plants, etc) could be used to get the thermal power needed for the evaporation process.
The available residual thermal power and required amount of water will help us to choose the one-stage or multi-stage system we want to install.
Our products include from fix installations to mobile desalination units.
|
|
Desalt fresh water generators
Desalt is a range of fresh water generators that are ideal for installation on-board ships, rigs and remote onshore/offshore locations.
Alfa Laval supplies a range of fresh water generators conversion of seawater into freshwater by vacuum distillation for the supply of high quality freshwater for domestic and process utilization.
For fresh water supply aboard ships the JWP series have been designed for automatic operation with continuous control of freshwater quality.
For off-shore rigs, remote locations and locations where a plentiful supply of sea water is required for process applications, the DPU series provides reliable return on waste heat.
Both types are easy to maintain, simple to install and are highly sea water resistant because of the titanium plates selected for the heat transfer surface.
|
|
Feature
- Low installation/Operating/Maintenance costs
- Ease of Maintenance
- Simple, Compact design
|
|
The distillating plant consists on two evaporator stages made in two independent chambers.
Each chamber has a submerge tube heater at the bottom, and one condenser on the second chamber.
The generated steam on the first chamber is used to warm-up the second stage heater.
The condensation produced inside the heater tubes is recovered via one steam trap by the distillate water pump.
This condensed water is the extra production that we can get using the same amount of thermal energy.
Distilling plants were designed to operate with waste heat from diesel engines jacket cooling water, any how the units can operate with other heat sources, like steam or combination of both systems.
The distillate water produced is a very high quality product with salt content in distillate less than 2ppm.of NaCl.
|
|
The SONDEX freshwater distiller utilizes the heat from diesel engine jacket cooling water to produce pure drinkable water by evaporating sea water under high vacuum, enabling the feed water to evaporate at temperatures below 48°C.
Steam can also be used as the heat source instead of the hot jacket water. The SONDEX freshwater distiller is based on two SONDEX titanium plate heat exchangers, acting as an evaporator and a condenser respectively.
|
|
The PETSEA RO systems are expandable and highly versatile being manufactured to each specific need, as they have pumps and hidraulic equipment that permit the installation of extra membranes to increase the water production without lowering the performance to the system.
Either the sea water equipments (SW) or brackish (BW), well or tap water equipments (TW), there is a wide range of products that go from our standard line up to the industrial line designed under the client specifications.
|
|
This operation is based on the principle of vacuum distillation. The sea water is boiled in vacuum at low temperatures in order to be transformed in steam. The steam passes through a monel strainer that eliminates any drop of water or strange particle, leaving only pure steam, that will pass to the condensation chamber.
The feed and seawater level are automatically controlled by devices already regulated at the factory so they do not need to be controlled by the user. The extra saltwater is continuously taken out from the system and pumped outside of the ship.
Once the system has been started, no adjustments are needed because of the automatic PETSEA VAP functioning, starting the fresh water production after several minutes. The freshwater is suctioned from the evaporator as soon as it is produced and pumped to the fresh water tank by means of a pump designed to work 24 hours a day.
|
|
The desalination plants quantum ro sw have been developed to work 24 hour/day continuously, obtaining fresh water of great quality from raw seawater, through reverse osmosis process.
Only the best materials and components are used in the making of these systems, in order to get the best quality and performance in the final product. The complete system comprises, besides of the RO module, a feeding pump and a pre-filtration treatment (sand filter and microfiltration cartridges) as standard configuration; different configurations of the system can be made, under customer requirement.
Production capacity of these units goes from 1 Ton per day to any capacity required by the client.
|
|
The vacuum evaporators quantum ev sw have been developed to work 24 h/day, obtaining fresh water of great quality from seawater.
This type of generators produce fresh water through an evaporation process, for which they need a hot water feeding, coming usually from the cooling circuit of engines onboard.
|
|
You do not want to abstain from amenities on board, that are taken for granted at home? With the fully automated Watermaker-Series from AQUAGIV you will not have to make any compromises any more.
The AQUAGIV PLATINUM series is made of extremely durable components of uncompromising quality. Each device is manufactured in Germany and tested before delivery to the customer.
Speed controlled high pressure pump:
The APM System guarantees a constant pressure and optimal performance of the high-pressure pump. The load of the electric motor is kept as low as possible thereby ensuring low-power consumption and low wear on the watermaker.
The operation is done with a water and impact-proof Infrared-touchscreen display or by pc.
|
|
It's Smooth Sailing with this Full-Featured, Affordable Water Maker
The Aquamiser Plus Series offers programmable settings and remote display capability through an advanced control marine reverse osmosis system. This value-driven solution is ideal for smaller water production needs. With outputs of 250 to 1800 GPD, the Aquamiser Plus marine watermaker will provide the safety and controls needed to operate both dependably and efficiently. These marine desalination systems are available in framed and modular configurations to be utilized in tight spaces and bulkheads. Small only in size, the Aquamiser Plus marine R/O unit features extensive controls, including a fully automatic fresh water flush system for unattended maintenance. Scheduled weekly or biweekly flushes will help keep your marine water maker fresh and ready for your next voyage.
|
|
Poseidon Is the Watermaking King of the Seven Seas
The Poseidon marine reverse osmosis system is the industry%u2019s choice when commercial applications call for substantial capacities of fresh water. This high-output marine desalination unit features unrivaled quality and superior manufacturing with proven reliability in the most demanding marine applications. With production ranges from 10,000 %u2013 22,500 GPD, the Poseidon marine water maker is commonly used around the world on offshore oil platforms, petroleum support vessels, commercial ships, military vessels, mid-sized hotels, island applications and for various remote necessities.
|
|
Titan Produces a Tidal Wave of Clean, Fresh Water
For the ultimate range in production, the Titan marine reverse osmosis system expands output from 11,000 to 43,000 GPD. These marine desalination units are a dependable solution for a variety of commercial applications, including oil and gas development operations, floating petroleum production platforms and extreme offshore exploration; freighters and military applications; grand hotels and commercial real estate developments; island resorts and remote retreats; localized municipalities and numerous circumstances where extreme volumes of clean, pure, fresh water are needed. FCI%u2019s Titan water makers feature unrivaled quality and superior manufacturing with proven reliability in the most demanding and diverse marine applications.
|
|
|
|
|
|
|
Neptune%u2019s Wave of Technology Has Taken the Marine Industry by Storm
When your needs demand continuous-duty, commercial-grade watermaking, the FCI Neptune marine reverse osmosis system is the anchor that keeps you steady. These efficient marine desalination units deliver great volume of water with capacities of 1200 to 9500 GPD. Ideal for large yachts, commercial vessels, island homes, oil platform, or hotels, a Neptune marine water maker will provide wherever clean, pure, fresh water is needed. Employing FCI%u2019s exclusive UROC Technology, a Neptune R/O unit enables advanced, total control and user-friendly system customization. Commercial necessities also include built-in cleaning ports on the framed units, washdown duty motors, 316SS high- and low-pressure pumps and commercial-sized pre-filters. Available in three configurations: Horizontal framed, Modular and the Wall-Mount system which combines the flexibility of modular installation with framed unit convenience. In addition, the Wall-Mount features uncompromised design, such as built-in pre-filters that slide out and lock back into place for easy maintenance. When your water demands are high and space is an issue, the wall-mount and modular series are a perfect fit. The entire Neptune series offers quality, dependability and years of worry-free operation in the most diverse marine environments.
|
|
Full Speed Ahead Into the Future of Watermaking
The Max-Q Series is among the most advanced marine watermaker ever manufactured. You can customize your watermaking needs with FCI%u2019s exclusive UROC technology and even monitor and run your marine reverse osmosis system from a remote location or a personal computer. Both framed and modular configurations produce fresh, clean water with outputs of 600, 1200 or 1800 GPD. Because each component is test and chosen for its ability to withstand long-term operation, every Max-Q marine desalination system is engineered and designed to operate in the harshest of marine environments. Our units are so advanced we have eliminated the need for pressure gauges and flow meters, leaving you with worry-free operation and years of dependable service.
|
|
Osmomar®
Mega Yacht
The structure is made of stainless steel AISI 316l, fixed the ground
with anti-vibration feet. The groups of membranes are subject to a sliding structure, to remove
all set ahead so that you can comfortably perform maintenance operations.
Make your own
Osmomar®
Front wall with doors and panels in methacrylate
will give you transparent view of the internal of Osmomar®
Or you can choose polyester colored in
white (ral 9010), black (ral 9005), blue (ral5010), gray (ral 7001),
green (ral 6005), red (ral 3000) or any other color you like.
Or we reserve the the option to prepare the doors and front panels
to match the decor where the equipment is located.
|
|
|
|
