Forged stainless steel shackles

P. 92
?HR? . Stainless Steel Shackles Forged The stainless steel shackles we use on Harken® blocks are available separately. We have increased the range in both configurations and sizes. Stamped Shackles The 072, 138, and 246 shackles are used on most of the Small Boat blocks. They are also useful

P. 48
-load configurations. High-load blocks feature Torlon® bearings and forged stainless steel shackles. The wire version features Hardkote-anodized, Teflon®- impregnated aluminum sheaves for strength and corrosion resistance. Use for: Main and jib sheets Spinnaker halyards Control lines Cutout 11/16" x 31

P. 230
............................................. 97 Spinnaker Pole Cars ................................. 90 Spinnaker Pole End Fittings ...................... 91 Split Backstay Plates ................................. 55 Springs...................................................... 82 Stainless Steel Shackles.......................92

P. 168
for Halyard, Head and Tack on Carbon Units Soft line attachment is extremely strong and takes the place of heavy stainless steel shackles. 6. Filament-Wound Carbon Foils Maximized torsional resistance foils save weight forward and aloft where it is critical. Smooth elegant carbon fiber finish is UV

P. 61
for less friction. Sideload ball bearings are protected by sculpted aluminum sideplates. Dissimilar metals are isolated to minimize corrosion. Low-load blocks use Delrin® rollers and type 316 stainless steel shackles. Like all AirBlocks®, the three-way head swivels/locks in front/side positions

P. 89
Allen?s range of stainless steel shackles has been developed over the years to include a full range of high quality shackles for a wide range of applications. The range includes pressed shackles, strip shackles, twisted shackles and forged shackles in a selection of sizes with a variety

P. 13
and durability. Stainless steel dynamic inner bearing Cold forged soft radius head Anchor formed fixing point reduces rivet size Stainless steel inner bearing Stainless steel ball bearings A2040 A2040B A2040SC A2042 Part Description Length mm Line Dia mm Shackle Pin mm Breaking Load kg MDL kg

P. 3
17 60mm switchable ratchet 17 High tension blocks 18 Lightweight plain bearing 22 Plain bearing blocks 20 Plain bearing reinforced blocks 21 Snatch blocks 17 Vang blocks 23 Springs - stainless steel 23 CLEATS 25 Cam cleats 27 Cam cleat accessories 27 ClamcleatsR 32 Cleat wedges 28 Jam

P. 83
A4659 Stainless steel welded ?S? hook 10 61 27 A4869 Forged stainless steel hook 5 52 23 A4869K Forged stainless steel hook with keeper 5 52 24.1 A4969 Forged stainless steel twisted hook 5 52 23

P. 42
and forged stainless steel lacing eyes and eye straps.

P. 52
1 4 7 8 6 2 3 5 9 10 11 12 13 Knives N° Part # Description Weight kg Forged handle 1 10082 Forged stainless steel handle, blade and shackle key 0.150 2 10084 Forged stainless steel handle, blade, shackle key, cork-screw. 0.150 3 10083 Forged Titanium handle, nitrided blade

P. 26
of shackle } No additional stainless steel cringles } Designed and made in France Benefits } Patented design } Opening by half turn } Easy to install with one hand } Forged in 316L stainless steel } Designed and made in France

P. 19
x 10 1200 2800 0.126 N° Part # Length mm A mm B mm W.L. Kg B.L. Kg Weight Kg Snap hooks «patented» 7 2480 50 8 6 200 300 0.023 2481 75 12 10 480 700 0.067 2482 100 16 13 1120 1500 0.186 Safety snap hook «HR» Models forged in 17.4 Ph (HR stainless steel) 8 2381 75 12 10 880 1600

P. 38
freely in any position. With its forged high-resistance stainless steel arm, the closing system is very strong. It can be opened very easily by pulling on the central plunger pin, as you would do with a normal snap shackle. St ain less steel snatch block This stainless steel snatch block can be used

P. 28
NOUVEAU NEU ? NEU ? NEW ? NEW ? A B 0 The MX is a High Resistance halyard shackle fully forged in 17/4 PH stainless steel to take on the high loads. MX has been specifically designed for static load operations and can be used to replace the terminals on flying sail furlers (i.e halyard

P. 2
b features b marine grade aluminium alloy cars track rails end stops anodised corrosion protection long service life recirculating torlon bail bearings free running low friction performance low maintenance grade 316 forged stainless steel pivoting shackles lanyard attachment rubber buffers reduced

P. 4
b installation b refer to the installation recommendations en795 1996 annex section a6 regarding the distance available site to arrest the fall falling worker the track rail must be mounted using 6mm 1 4 countersunk grade 316 stainless steel fasteners 100mm 3 15 16 centres end stops must be mounted

P. 5
and spools • Outstanding working and breaking loads • Fully forged in 17/4 stainless steel for High Resistance • 3 sizes available: MX6, MX8 and MX10 – for lines from 8 to 14 mm Wichard Clevis Pin Snap Shackle Aluminium thimble / Stainless steel thimble • Included on all models

P. 4
replacement to a removable stainless steel forestay. See technical documents on page 49

P. 7
10 12 16 Weight Kg Technical data for thimbles Part # : 119907 (NEX 0.9) 0,015 0,017 0,055 0,068 Material stainless steel Thimbles for NEX 2.5 and 5.0 B Ø Luff line Thimbles for NEX 0.9 and 1.5 aluminium A B C G A E F Ø Luff line C Ød

P. 2
. NEX: MODELS • 4 models available: NEX0.9, NEX1.5, NEX2.5, NEX5.0 • For boats from 6 to 18m • Optimal size and weight • Wide range of terminals to fit your boat: Wichard snap shackle, MX (Wichard halyard shackle), standard shackles, 2:1 halyard blocks • Proven Profurl

P. 6
Technical data: MX halyard shackle Weight Kg Technical data: clevis pin snap shackle Part # 2293 Part # 2295 Clevis pin snap shackle Shackle Part # 2297 For NEX: NEX 0.9 and 1.5 NEX 2.5 NEX 5.0 Height: pin to arm: A mm 39,5 (1 9/16’’) 54 (2 1/8’’) 65,5 (2 9/16’’) Passage