|
|
thickness excluded Veneer or Hpl,
Final thickness included Veneer + 1mm. (+/-)
Final thickness included Hpl + 1,6mm. (+/-)
Moistre resistant chipboard which can be used in a moistre surrounding.
Extra strong, stable and perfect for screws.
Minimal influence from humidity like swelling and transformation.
Easy workable, multifunctional standard board.
Weight ca. 700 kg/m3.
|
|
| ... products without information |
| |
|
R&M floating floors have been developed for very different needs, for example fire protection, sound reduction and also subsonic noise reduction. Our floors meet the requirements of any of these needs and can therefore be used for various situations.
|
|
|
Metawell panels are also used for raised floors and platforms in public areas of all kinds of vessels. In view of the stiffness of the panels the distance of the supporting frame can be increased, which reduces both assembly time and cost. For higher requirements regarding the compressive strength (point loads) special panels with a higher compressive strength are available. Technical information regarding the dimensioning of suspended floors can be obtained on request.
|
|
Galvanized steel cassettes of 3 mm thickness. All 4 edges are bent for maximum strength.
To insulate according to A-60 fire class combined with acoustic insulation, the F-300 has proved to be a product preferred by many customers.
The system is easily transported and installed with a handy size. It has a very good carriying capasity due to the fact of using 180kgs/m2 insulation as a strong base materials with 3mm galv steel sheet top.
|
|
| ... products without information |
| |
Seaview is proud to present the FLOOR ANCHORS from PYI.
This product is designed and engineered to secure floorboards or lock hinged panels. Made out of
316L stainless steel or brass, they will not corrode, discolour with age or damage the wood surface.
The Floor Anchor safely holds 200kg per unit. The PYI Floor Anchors meet ISAF (formerly ORL)
requirements for offshore boats (category 2.03).
The opening mechanism is a simple bayonet style, with ¼ turn lock and release that will not loosen
with age. It can be opened or closed by either a coin or a flat head screwdriver. The 11-FA0-34 is
suitable for 13 to 19 mm thick floorboards and the 11-FA1-00 is for 22 to 30mm thick floorboards.
In 318 stainless steel or in brass, this locking system will allow you to safely secure a boat
floorboards without damaging the wood, while still allowing easy access, all of this with a stunning
look never before offered as a fastener.
|
|
|
|
