|
|
Edge Mount Kits
Design For Edge Applications
- Easily attaches to your dock for secure fender installation
- Designed to be placed on the Edge of your slip to hold your fender securely
- All aluminum construction for long life
- All stainless steel and nylon hardware included
- Installation is a snap requiring only common hand tools
- Works with most popular 8-1/2 " Fender designs
|
|
FenderBud™ is designed for floating docks to secure your fenders properly instead of using ropes or tie wraps.
This FenderBud™ model is designed to protect the rear (stern) along with the swim platform while docking.
- Easily attaches to your dock for secure fender installation
- Designed to be placed in the rear of your slip to hold your fender securely
- Helps protect your platform and transom from dock collisions by holding the fender in proper position
- All aluminum construction for long life
- All stainless steel and nylon hardware included
- Installation is a snap requiring only simple hand tools
- Works with most popular 6" and 8" Fender designs
|
|
Use this Davis accessory to clip your fenders to rails, lifelines, side wing windows or cleats. Fender Tender II simplifies the handling and relocation of boat fenders. The "Railing Lock" firmly grasps rails from 7/8" to 1" (22 to 25 mm) diameter. New "Lifeline Lock" provides added safety. Use 1/4" to 3/8" (6 mm to 9 mm) diameter nylon line. Made of tough, sun-resistant plastic.
|
|
|
A real piece of gear - Superior quality throughout - made of heavy-gauge stainless steel. It's by far the sturdiest unit available-bar none! It's sleek, slim design provides 2" to 3" less protrusion into the deck area than other models and adjusts to any rake [right, left or vertical]. Collapses easily for off-season storage. Shipped complete with all hardware-no added mounting brackets to buy. Mounts easily on 7/8" or 1" diameter rail or may be deck mounted with holes provided.
|
|
|
Now available in two sizes. To suit two 200mm or two 240mm fenders. Stainless Steel - Marine Grade - 19mm diameter tube. Bright polished finish. Adjusts to various angles. Simply rivet or screw in position to bulkhead or rails.
|
|
FENDEQUIP FENDERCOVERS AVAILABLE TO FIT ANCHOR MARINE FENDERS
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
| ... products without information |
| |
... see all the products in the category
Fenders
|
Fast lifebuoy release system.
Holds standard ring or horseshoe lifebuoy, up to a circumference of 400 mm, firmly in place.
Ensures lifebuoy is quick and easy to launch.
Made of solid, flexible and durable polyurethane.
Fits most guard rails.
|
|
This stamped aluminum holder is powder coated to withstand the harsh marine environment. It mounts to any 7/8" or 1" railing. Complete with a nylon strap to hold your buoy secure.
|
|
|
COMMERCIAL QUALITY - Features heavy-duty, welded stainless steel construction throughout for a lifetime of maintenance-free use. Its rugged beauty will enhance any installation. Available in three standard sizes with pre-drilled holes for stanchion and life line mounting (see sketch), as well as cabin wall installations.
|
|
| ... products without information |
| |
|
... see all the products in the category
Lifebuoys
|
- Support for solar panel external of balcony
- 8 positions whose vertical
- (dismountable)
- adapts to all the balconies with the system Fast Install
- Quality MPI and French manufacture
|
|
Easy Mounting as 1-2-3.
So you want to mount your spanking new, sun-sucking, Sunsei® SE 4000 / 6000/ 8000 on the rail, upright bar, beam or post (7/8 or 1") of your boat, RV or cabin? Great idea. You take a more hands-on approach, you want to be able to manipulate your Sunsei solar panel at will. That's why we created the Sunsei® Pole Mounting Kit, to let you mount your Sunsei solar panel hassle-free without drilling your deck or roof. Talk about sturdy - this mount is manufactured with premium marine-grade stainless steel to withstand wind, sea and bird poop.
|
|
| ... products without information |
| |
Multifunction housings for every type of electronical instruments to apply to the Solimar's steering systems or universal
Other available accessories:
Autopilot levers
Tiller caps & water/fuel caps in aluminium or stainless steel
Aluminium monolever engine box
Monolever engine box
Housings & cockpit tables
Leather or Lorica covers - kit do-it-yourself in leather or Lorica
Crosstree/bottle screw/winch covers in Lorica
Cover for steering system in plastic
|
|
RWO Rudderheads, tillers and extensions are renown for their reliability world-wide. They are all designed to steer a sailboat positively in all aspects of sailing and wave conditions whether by Olympic yachtsman or absolute novice.
The Rudderheads offer a multitude of features that probably make them the stiffest, lightest, strongest in the world. Two ranges of RWO Rudderheads are available - one to suit fixed tillers, and the other for convenient detachment, has an extruded hood. Both cover standard blade widths and are suitable for a range of dinghies and dayboats. The inbuilt rigidity gives the helm the positive control of a fixed rudder with the convenience of a lifting blade.
|
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. Please fill out the form below to start the process.
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
| ... products without information |
| |
Panel for 4 or 8 waterproof switches or push buttons
|
|
|
The DI BLASI scooter is the only one that really folds. It can be folded to the size of a suitcase in only 5 seconds. Push down the saddle, lower the handlebar and fold the footrests. Done! The folded scooter fits almost anywhere. It is just as easy and fast to turn it back into a ready-to-drive scooter that runs normally. Ideal as a backup vehicle on the boat, in a camper van, on an airplane and as a leisure time vehicle in general. Kept in the boot of a car, it will always be ready as an alternative means to navigate through city traffic jams It is the only one used by car hire companies and garages to deliver and collect cars and by chauffeur services for people who are temporarily unable to drive their own vehicle, etc. It is type-approved in accordance with European standards.
|
|
|
|
see the results for the following category