|
|
|
The remarkable, newly designed Jim Buoy Hurricane Fender actually can prevent damage of collision 3 times more effectively than any other simple fender! Where other inflatable fenders "bottom-out", the Hurricane never will! The secret to the Hurricane's success is its unique, internal cushion that in effect provides free insurance. Working in conjunction with the outer compressed air chamber, the high-density inner foam core can absorb the shock of hard, direct contact with docks, pilings, etc. and never "bottom-out!" A sudden wave-wake or pilot error while docking may cause a serious and expensive hull dent or even personal injury. By employing the Jim Buoy Hurricane Fender this risk can be greatly reduced or even prevented. Remember, the final, sharp jolt affects the most damage.
|
|
|
Two things every boat never has enough of, SPACE and PROTECTION. AERE Inflatable Fenders for your boat or yacht will solve both problems.AERE inflatable fenders allow the maximum in protection for the minimum in storage space requirements.Over 40 sizes and types of AERE fenders, 12" x 29" through 8' x 10', dual chambered extreme duty models, flat fenders, "V" shaped fenders, and other extreme duty fenders, all provide the size and strength necessary to fend off your worst docking situation or careless neighbor and still store in a small space.Now you are able to properly size your fenders to your boat and docking conditions, not the size of your storage lockers or your crews ability to handle them..AERE Inflatable Fenders are manufactured using extremely durable materials, and high quality air valves. AERE Inflatable Fenders are available in your choice of nine colors to provide the utmost in style, durability and protection.
|
|
Fendequip ‘Super Yacht’ Fendercovers
We specialise in manufacturing Fendercovers for the Super Yacht market.
All Fendercovers are manufactured from our own premium loop knit fabric, in double ply. Whether your fender is 1 meter or 7 meters we have the facilities and capability to produce a Fendercover to your specifications.
Fendercovers are available for the following inflatable fenders:
• Aere
• Avon
• Henshaw ‘Easystow’
• Mega Fend
• Nautica
• Novurania
• Ribcraft 'Rapidstow'
|
|
Attractive fender covers with the boat name, a yacht club logo or the manufacturer logo will give an exclusive first impression, wehen your goat is entering port or guests are coming on board.
Design your new fender equipment according to your wishes!
|
|
Single eye fender cover
Single eye fender sock Made 2 Measure to fit Anchor Marine fenders.
|
|
Fendequip 'Custom Made' Fendercovers
Fendequip 'bespoke' Service: If you have non-standard size fenders on your boat then we will be pleased to custom-make your fender covers from our taylored range.
Each cover will be hand finished to your individual fender size and specification.
Available in a choice of four standard colours: Navy Blue, Royal Blue, Black and Red and we may be able to match a specific colour of your choice.
|
|
Fendequip 'Embroidery' Service
For that added touch of exclusivity we can even embroider your boat's name, company logo, yacht club insignia or family crest on to each Fendercover, Rope Cover, Safety Rail Cover or Guard Rail Cover.
|
|
Fender cover with your boatname and/or logo
Lettered fenders are proof of individuality and exclusiveness. What has been reserved to super yachts so far is now affordable for all owners.
Your boat name or logo can be knitted directly into the fender cover fabric (not embroidered or printed on). Thus lettering is permanent and can not get rubbed of.
|
|
|
|
|
|
|
FENDEQUIP FENDERCOVERS AVAILABLE TO FIT DAN HILL PLAST FENDERS
The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
|
|
|
|
|
FENDEQUIP FENDERCOVERS TO FIT MAJONI FENDERS
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
|
|
|
|
|
FENDEQUIP FENDERCOVERS AVAILABLE TO FIT ANCHOR MARINE FENDERS
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order, at a minimal extra cost.
|
|
|
|
|
|
|
AVAILABLE TO FIT THE ENTIRE POLYFORM SERIES
"The, must have, essential accessory for boats of all sizes including super yachts."
The surface of modern hard plastic fenders traps grit and dirt between the fender and topside.
The constant rubbing of bare fenders on the topsides will cause significant damage to the gel coat of your boat, which is normally very costly to repair.
Fendequip fender covers are specially designed to protect the topsides from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colours and sizes to suit your individual requirements.
Fendequip fender covers will also protect your fenders from dirt and UV and will make your boat look clean and smart. Fendequip fender covers are the, must have, essential accessory for boats of all sizes including superyachts.
Colours: Standard colours throughout the Fendequip range are Navy Blue, Royal Blue, Black and Red. Or a special colour of your choice may be matched, when you place your order.
|
|
Cover of defenses to the meter to cut oneself
- not of seam necessary
- retracts and is rolled up all alone at the edges
- culprit with simple scissors
- quality ratio/prices excels. Ideal for
passages of locks, in condition of fort
friction.
- very elastic, adapts well and holds
- between also in the baskets with defenses
- washable with 40°C
- 2 sizes: - Diameter 16-22 cm
- Diameter 22-30 cm
Car-rolling up edge:
Simply to cross!
No the seam
necessary!
|
|
Use this Davis accessory to clip your fenders to rails, lifelines, side wing windows or cleats. Fender Tender II simplifies the handling and relocation of boat fenders. The "Railing Lock" firmly grasps rails from 7/8" to 1" (22 to 25 mm) diameter. New "Lifeline Lock" provides added safety. Use 1/4" to 3/8" (6 mm to 9 mm) diameter nylon line. Made of tough, sun-resistant plastic.
|
|
|
A real piece of gear - Superior quality throughout - made of heavy-gauge stainless steel. It's by far the sturdiest unit available-bar none! It's sleek, slim design provides 2" to 3" less protrusion into the deck area than other models and adjusts to any rake [right, left or vertical]. Collapses easily for off-season storage. Shipped complete with all hardware-no added mounting brackets to buy. Mounts easily on 7/8" or 1" diameter rail or may be deck mounted with holes provided.
|
|
Now available in two sizes. To suit two 200mm or two 240mm fenders. Stainless Steel - Marine Grade - 19mm diameter tube. Bright polished finish. Adjusts to various angles. Simply rivet or screw in position to bulkhead or rails.
Dixon 8" Fender Holder
Adjusts to various angles. Fit to bulk-head or rails. Holds 2 x 8" fender.
|
|
|
|
|
|
|
The surface of a boat is coated with a thin gel coat or paint over the glass fiber hull, which is vulnerable to abrasion. The fender protects the boat from damage during mooring and docking, but the surface of modern plastic fenders often traps grit and dirt. Constant rubbing of bare fenders on topsides can cause abrasion and significant damage to the gel coat or paint, which is both unsightly, hard to remove and costly to repair.Boat owners with painted hulls or expensive graphics especially need to prevent the damage standard fenders can cause. These delicate finishes are easy to mar, damage and expensive to repair.Made by hand, in the US from US materials, they are a particularly non-abrasive loop-knot acrylic fabric with a soft cushion effect surface,
Fenda-Sox covers fit tightly over the fender, preventing grit and dirt from becoming trapped Fenda-Sox gives you the added protection your gel coat and paintwork require, saving you time and money on expensive maintenance and repairs. The covers also stop irritating fender squeak -
|
|
| ... products without information |
| |
|
|
