|
|
|
|
|
|
|
Be sure your HEPA vacuum is certified! A lot of companies claim to have a HEPA vacuum, but many are not certified. If OSHA walks onto your job site, and your HEPA vacuum is not certified, they will shut you down. The HEPA Vacuum from Dustless Technologies is certified, and it provides many benefits you won't find in any other vacuum system. Check out our regular Wet Dry Vacuum to see the impressive array of other features.
One of the big advantages of the Dustless HEPA Vacuum is the optional Micro-prefilter that greatly extends the life of the HEPA filter. The Micro-prefilter is an inexpensive disposable filter that captures the vast majority of the dirt and dust before it reaches the more expensive HEPA filter. In fact, the Micro-prefilter captures particles down to .5 microns. That's remarkably close to the HEPA filter that captures particles down to .3 microns. We highly recommend contractors use a Micro-prefilter in the HEPA Vacuum to extend the life of the more valuable HEPA filter.
Features:
Certifed HEPA rated vacuum system
Optional disposable Micro-prefilter extends life of the HEPA filter
16 gallon capacity
Designed specifically for capturing extra fine dust
Airtight design
Won't "cough out" dust when turned on
|
|
|
|
|
|
|
Not All Vacuums Are Created Equal!
Don't compare the Dustless Wet Dry Vacuum to typical wet dry vacuums. The Dustless Wet Dry Vacuum is specifically designed to capture the extremely fine and dangerous dust created from cutting, grinding and sanding of concrete, masonry, stone, drywall, fiberglass and other construction materials.
Patented filter system provides three layers of filtration
Optional micro pre-filter captures down to .5 microns
Certified HEPA vacuum model also available
Filters can be cleaned without removing the lid
No need to change filters when switching from dry to wet (the filters never get wet)
Machine washable synthetic fabric filters
Quiet operation, only 81 decibels
Powerful 23,000 RPM 11.5 amp electric motor
Tools store easily on the Wet Dry Vacuum
Automatic shut off for wet pickups
Suction hose can be used for draining the 16 gallon tank
How you can tell the difference:
When you turn on a regular wet dry vacuum, watch it cough out a cloud of dust from its exhaust port. If it's been used for dust control, or to vacuum up fine dust, it's easy to see. The problem is that typical wet dry vacuums are designed for saw dust - coarse wood chips, and dirt you'd find on a garage floor. The filter system is not very sophisticated. When you talk about dust control, it's a whole different ball game.
Airborne dust is much smaller and much more dangerous. Breathing dust from concrete, drywall and other construction materials can cause cancer and kill you. The Dustless Wet Dry Vacuum captures airborne particles down to .5 microns when equipped with a micro pre-filter. That's close to a HEPA vacuum which captures down to .3 microns. A wet dry vacuum doesn't even come close.
The Dustless Wet Dry Vacuum has a patented filter system featuring a primary and secondary filter, both made out of machine washable fabric. An agitator rod lets you clean the outer primary filter without opening the unit. The micro-prefilter bag is optional, and delivers many advantages. To install it, simply fit it over the intake port, making sure it snaps completely in place, and close the unit up. It is oversized intentionally so when it's time to empty the wet dry vacuum, there is still 40% of bag's capacity to ensure optimum air flow. Other vacuums CPM drops off after collecting only a few pounds of dust. Our maintains optimum CPM with as much as 40 lbs. of dust in the bag. An adhesive seal helps you keep the jobsite even cleaner. The micro-prefilter also retains its strength when wet.
Cycloning water vapor is captured on the ridges of these yellow bars, and drains down, away from the filtration system. A check ball prevents water from rising up to the filters and motor. Unlike other wet dry vacuums, our enables you to go from wet to dry vacuuming without changing the filtration elements.
Our wet dry vacuum also comes with a high-quality floor tool that's ideal for slurry pickup. The hose can be connected to the drain port so water and slurry can be dumped up to 12 feet away. The hose is very durable. And if it's ever damaged, repairs are fast and easy to make.
OSHA and NIOSH are implementing guidelines mandating dust control systems in the construction workplace, and you can rely on solutions from Dust Collection Products that help protect worker safety.
A certified HEPA version of our wet dry vacuum is also available through Dust Collection Products. A lot of companies claim to have a HEPA vacuum, but they may not be certified. If OSHA walks onto your job site, and your HEPA vacuum is not certified, they will shut you down. Ours is certified. We recommend contractors use a micro-prefilter in our HEPA vacuum to extend the life of the more expensive HEPA filter. The micro-prefilter captures particles down to .5 microns. That's remarkably close to the HEPA filter that captures particles down to .3 microns.
Our floor tool features a brush skirt and wheels for improved performance. It's far superior to using a broom. The Dustless Wet Dry Vacuum comes with a full set of tools that conveniently store right on the unit. Put a Dustless Wet Dry Vacuum to work for you!
For those of you who are wondering what the difference is between model number 16003 and 16004, here is your answer. They are the exact same vacuum except for the front label and packaging. The 16004 is marketed for the drywall industry by Dust Collection Products and the 16003 is marketed for the concrete, remodel, and home owners market.
See the AMAZING video!
Features:
Powerful 23,000 RPM 11.5 amp electric motor
Quiet operation, only 81 decibels
16 gallon capacity
High impact tank for years of trouble free use
Patented filter system provides three layers of filtration
Optional micro pre-filter captures down to .5 microns
Clean filters without opening canister
Filters may be cleaned without removing the lid.
No need to change the filter when switching from a dry to wet (the filters never get wet).
Does not cough dust when Wet Dry Vacuum is turned on
Primary and secondary filters are machine washable synthetic fabric
Tools store easily on the Wet Dry Vacuum
Suction hose can be used for draining the tank
Certified HEPA vacuum model available
|
|
|
|
|
|
|
Dust Control System for Drills and Percussion Hammers
Captures dust and slurry
Suction holds it in place
Great for tight spaces
Excellent for drilling faucet holes in stone countertops
Use with core drills or percussion hammers
The BitBuddie dust and slurry control system is for use with drills, hammer drills and core drills. Fast and easy to use, the BitBuddie dust and slurry control system is held in place by vacuum pressure. No clamps or braces are required. Simply turn on the Wet/Dry vacuum and put the BitBuddie where you want it, and you're ready to drill. The 1-3/8 inch size is great for drilling faucet holes in stone countertops or any other place where space is tight. It allows you to drill close to a wall or other obstacle and capture the dust or slurry as it's made. The 3 inch BitBuddie is for use with larger core drills and does an excellent job of capturing dust and slurry to keep the job place clean and protect workers from dangerous airborne dust like silicon and Hexavalent Chromium.
The BitBuddie is designed to be used with the Dustless Technologies Wet/Dry Vacuum. A system that is specifically designed handle the dust and slurry created in construction sites. Check out our Wet Dry Vacuum video and see why it is the last vacuum you'll ever own.
|
|
|
|
|
|
|
Professional's #1 Choice in Dust Control!
Fits most 4" - 5" and 6" - 9" hand grinders
Fast and easy to install
Clear polycarbonate for improved visibility and durability
Removable front edge of shroud for grinding close to wall or edge
Brush skirt for improved performance on textured surface
Captures 99% of airborne particulate
The DustBuddie dust control shroud fits most hand grinders including Makita, Bosch, Dewalt and more. It captures up to 99% of airborne particles for outstanding dust control that preserves air quality and protects workers from harmful silica dust, Hexavalent Chromium and silicosis caused from sawing, cutting and grinding concrete, stone, masonry, fiberglass and other construction materials. Meet OSHA guidelines for worker safety with the industry's best dustless grinding system.
The DustBuddie dust control shroud installs fast and easy. The universal attachment system is built onto the dust shroud and simply tightens with a band clamp. Adjusting the height to accommodate different cutting blades or grinding wheels is a simple matter of tightening and loosening three spring-mounted screws.
When grinding uneven or textured concrete or masonry surfaces, you'll like how the brush skirt promotes a smooth gliding motion for better control.
The front lip of the dust shroud is removable so you can grind up against a wall. Snap it on and off with ease. Take the front lip off and add a cover plate, and you now have a dust control system for tuck pointing, decorative concrete cutting and crack chasing.
The DustBuddie dust control system is designed for use with our Wet Dry Vacuum, which is specifically engineered to capture the extra fine dust created by concrete, drywall, masonry, stone, fiberglass and other commonly used construction and industrial materials. Far superior to a regular wet dry vacuum, the Dustless Wet Dry Vacuum has a patented filter system and numerous other advantages you'll want to know about. Learn more and see the video!
Not only does dust cleanup cost you time and money, it is a serious safety hazard. Enhance worker safety with DustBuddie point-of-origin dust control systems for hand grinders.
Features:
Removable front lip for grinding up against walls
Integrated universal adapter for fast and easy installation
Fits most popular hand grinders
Durable clear polycarbonate for improved visibility
Brush skirt provides cushion affect for smooth handling on rough surfaces
|
|
|
|
|
|
|
The Pro's #1 choice for dust collection when cutting, tuck pointing or crack chasing with a hand grinder.
* Fits most 4" - 5" and 6" - 9" hand grinders
* Captures 99% of airborne dust
* Fast and easy to install
* Clear polycarbonate for improved visibility
* Comes ready to use
* Integrated universal adaptor
* From the leaders in dust collection
The CutBuddie is simply the best dust collection system you can find for hand grinders. Durable, unobtrusive, easy to install and reliable. Installation is quick and simple. Adjust the set screws in the universal adapter, slip it on the grinder and tighten the band clamp, and you're ready to go!
Unlike awkward metal shrouds, the CutBuddie is sleek and see-thru so it does not interfere with operator visibility. What could be more important when performing intricate cuts in important projects. Pros know the right tools gives them the edge and that's why they choose CutBuddie more than any other dust collection shroud. The sleek, see-thru design enables Pros to deliver more precise, higher quality work. That's why you'll see Pros using the CutBuddie on commercial and high-end residential construction projects across the country.
The CutBuddie is a durable dust control system that will last and last. It's made of highly durable polycarbonate - a space-age polymer that rivals tempered steel in tensile strength and durability.
|
|
|
|
|
|
|
The economical choice for dust control when using a hand grinder.
Fits most 4" - 5" and 6" - 9" hand grinders
Flex-Flange™ connecting collar fits most hand grinders
Attaches quickly & easily
Captures 99% of airborne dust
Dust control has never been easier. Simply slip it on, tighten a band clamp, and you're ready to go! The revolutionary Flex-flange connecting collar expands and contracts to fit on virtually any make or model of hand grinder. For some models of hand grinders, you may have to use a pare of shears to trim the tips off the Flex-flange to adjust the height. After that, a simple tightening of a band clamp is all you need.
Check out the optional cover plate for the Dustie. With it, you can use your Dustie for tuck pointing, crack chasing and decorative concrete cutting. All you have to do is trim a section off the front edge of the Dustie and snap the cover plate in place. Two cut lines are molded into the Dustie so you can choose from two different operation angles. Either one works with the cover plate.
Keep two Dusties on hand - one for flat grinding and one for cutting.
Be sure to check out the Dustless Wet Dry Vacuum. It is specially design for dust control of the extra fine dust created by grinding and cutting concrete, masonry, stone, fiberglass and other materials. Watch the amazing video of the Wet Dry Vacuum.
Features:
Economical Dust Control
Super Fast and Easy Installation
Flex-Flange Connecting Collar Fits Most Hand Grinders
Captures 99% of Airborne Dust
Simple Design for Reliable Performance
|
|
The economical choice for dust control in the automotive/boat repair industry and industrial applications.
* Fits RO sanders
* Fast and easy to install
* Attaches quickly & easily
* Captures 99% of airborne dust
* Protects workers from harmful dust
* Flexible and transparent for better visibility
Be sure to check out the Dustless Wet Dry Vacuum. It is specially design for dust control of the extra fine dust created by grinding and cutting concrete, masonry, stone, fiberglass and other materials. Watch the amazing video of the Wet Dry Vacuum.
|
|
| ... products without information |
| |
|
|
