|
|
The Arctic service pedestal stands out because of its compact design, while still being able to host a lot of service possibilities. Its slender design makes the Arctic the perfect compact addition to Seijsener’s pedestal range.
Main characteristics:
• Built-to-last thanks to it’s sturdy housing, made of extruded aluminum;
• Co-extruded fast assembly sections make for a minimum of installation time;
• Only little space required (dimensions 160 x 100 x 850mm),
• A multi-purpose service pedestal (fit for power outlets and water tap but also as lighting device or safety station) which contributes to the uniform appeal of a marina.
|
|
The extension of the existing range of power pedestals with the Atlantic series allows for greater flexibility and faster assembly of control switches, terminal blocks and other control gear to manufacture a marina service stand that will accommodate all services required on a modern marina.
Constructed in extruded, tough, anodised aluminium to tight dimensions. The unit has two hinged doors to separate compartments for water and electricity. Hinges are also of aluminium to eliminate corrosion.
Sloping side panels with grooves give the enclosure a leaner appearance. The lockable service doors face the walkway to avoid blocking the pontoon finger when in service.
|
|
|
The Hatteras Light is an elegant and low cost alternative to the Lighthouse. It utilizes the same 360 degree light assembly as the Lighthouse, yet is only 30 inches tall. Thousands of these attractive pedestals are found not only in marinas, but also around pools, deck areas, boardwalks and landscape areas. The housing will never rust or corrode and comes with a limited lifetime warranty. This unit is popular for smaller slips at marinas with the Lighthouse and for private docks.
|
|
|
The Lighthouse-SS offers the same standard features and available options as the standard Lighthouse. But, like all of the stainless steel products manufactured here, the Lighthouse-SS is made with high quality 316L stainless steel for superior quality and performance.
|
|
|
Truly the flagship of our unitized pedestal line, the Admiral SS possesses amperage capabilities up to 500 Amps and voltages of 480/277Three Phase, 120/240 Single Phase and combinations of these receptacles all in one unit to serve nearly any size MegaYacht.
|
|
|
Five years of development and thirty prototype models have yielded the most innovative mini-power center available. The Newport Harbor Mate represents the leading edge of Marina Power and Lighting equipment with more features than any other unit for its size. This rugged unit can be mounted on a piling, a dock box, or a pedestal. As with all Eaton's Marina Power and Lighting equipment, it meets the strict Underwriters Laboratories standards.
|
|
|
The ESB Power pedestal has evolved continually for over a decade. Now capable of accommodating more equipment than ever before the ESB is a versatile option for marina services. The ESB has a distinct advantage to its competition – it will not corrode. The ESB internal support chassis is manufactured from a heavy duty medium density polyethylene and contains no metal parts. This means it can be installed in the most exposed locations and will never suffer from corrosion.
|
|
African Ivory Pedestals
If your looking for a stylish pedestal either to match the finish on your pontoon or to offer a contrast to enhance it's appeal, the African Ivory Range is all you need. Manufactured from 4.0mm Acrylic Capped ABS the plastic has a 'pinseal' finish to add extra scratch resistance, ideal on a busy pontoon.
The two sizes shown here are the 840mm and 600mm high units.
The alternative 1130mm high unit can also be supplied within this range along with varying levels of equipment to suit your needs.
|
|
Enhance the look of your pontoon with our ‘wood effect’ pedestals. The options shown here are a two way pedestal with electric and water outlets and a Pontoon Light. Manufactured from 5.0mm Fomalux with a foil laminated finish, the process involves the same procedure as used by many conservatory, replacement window and door manufacturers when making their product.
The finish is therefore very resilient and well tested, ensuring longevity. All sizes of pedestal and levels of equipment can be offered in this finish
|
|
User-friendly supply unit
Our primary goal in developing the T2 pedestal was to create an attractive and user-friendly supply unit for power and water at marinas, harbours and camping sites.
The pedestal is available with 2, 4 or 6 power outlets with the possibility of one- or three-phase
outlets up to 32 amps.
One or two water taps and a hose rack can also be installed.
The T2 pedestal is thus a complete utility supply solution - which is both simple and
extremely robust.
|
|
Sentinel solo is a self contained metering system for individual pedestals. This system is controlled by coin / token or RFID contactless card. The system works by users depositing payment directly into the pedestal (or in the case of RFID, swiping their prepaid RFID Tag or card). Sentinel Solo can be controlled by the following methods
* Time - The power or water is activated for a pre set time (e.g. 15 minutes). Once the time limit has elapsed, the services are disconnected and the user has to obtain more credit or insert another coin.
* Consumption – The power or water is activated for a pre set consumption (e.g. 15 KW of Electricity or 100 Liters of water). Once the consumption limit is reached, the services are disconnected and the user has to obtain more credit or insert another coin.
This solution is ideal for berths in remote locations as it requires minimal maintenance and control or larger installations requiring minimal interaction with billing of services.
|
|
The Baltic offers everything the discerning visitor might expect: currents up to 600A with double locked plugs and connections for high capacity water supply. Discreet lighting and, if desired, connections for TV, telephone and internet facilities complete the conveniences.
The robust and well-shaped body reflects the quality of the Baltic. It is made of powder coated stainless steel (SS 316). Thanks to the ingenious situated door the Baltic is easy and quick servicable. On the inside, insulation and special terminal clamps see to maximum shielding of the high current rates. Extra security is created by placing a bulkhead between the water and electricity compartment.
The Baltic is supplied with a lighting cap with 4 power LEDs. Power and water connections are provided as desired, in accordance with local regulations.
Color, shape and finish of the Baltic can be adapted to the looks of the existing marina.
|
|
The pedestal is supplied with up to 6 power outlets.
Each individual outlet is protected by an automatic circuit breaker with pushbutton reset, and
there is also an ELB-relay for max. every third outlet.
In its simplest form, the T6 has no device for recording consumption, and the basic model is
highly suitable for places with changing guests and a relatively modest consumption per guest.
The pedestal can also be equipped with one or more taps, thus becoming a complete
and user-friendly energy solution.
The new version of the T6 pedestal offers the option of one- or three-phase power outlets
right up to 63 Amps, so even big boats can be supplied without problems.
All models have simple and intuitive operation, also, thanks to the inbuilt lighting,
in the dark.
|
|
For harbours with numerous guest sailors, the T6 pedestal can be fitted with a robust and
easily serviced coin operation system.
It is therefore possible to sell power or water against payment in cash, and the system
itself is made so that it is easy to inspect and empty of coins collected.
The coin system can also easily be changed to suit other types of coins or tokens.
|
|
|
|
|
|
|
For marinas wanting to make a statement, the VX range is the only way to do it. Combining style, practicality and innovative highly durable materials the VX is the ultimate in pedestal design. The VX is the product of a design program spanning several years. The objective - to create a pedestal using the most robust materials while not sacrificing on style and practicality.
The VX is manufactured from a durable composite material consisting of two 0.5mm Aluminium shells thermo-bonded to a polyethylene core, making composite incredibly durable. Due to the unique properties of this material, it also acts as a great insulator by keeping electrical equipment at a constant temperature and within its operating temperatures. This material is available in almost any colour including brushed stainless effect and mirror finish.
The VX internals are manufactured from a medium density polyethylene and no metal parts hence no corrosion – ever.
The VX is supplied with an innovative sliding door system. This system ensures all electrical equipment are offered the maximum amount of protection while keeping the appearance clean and flowing with no visible flaps and switches. Furthermore the sliding door system allows for easy installation and maintenance, simply unlock and open the door and perform the installation or maintenance as required.
|
|
...specially designed for luxury sites
In some situations - for example, luxury sites in the most stylish and exclusive marinas,
only the absolute best is good enough.
This is precisely where our top T6 model enters the picture. This model has a 63 A power
outlet for big boats as well as two taps, and both taps and power outlet of course have
individual meters. A TallyCard system is also available.
As a very special feature the top model also has an antenna connection for radio/TV
as well as telephone and Internet connections.
|
|
Characteristic Electrical workers
Nominal tension: 240/400V
Nominal frequency: 50/60HZ
Nominal current: 63 To
Switch gen. max: 4P-63A-10kA
Taken max: 3P+N+E - 32 To
Morsettiera max: 16 mm2
Normative standard: EN 60947-1
EN 60439
|
|
|
The new line of services distribution Jolly Magnum has been designed to offer a strong and harmonic product for all those situations where safety and aesthetics have to coexist in the respect of the regulations in force. These distribution boards for outside are realized with materials of great resistance to corrosion and painted with polyester powder coating to maintain their characteristics for a long time.
|
|
The fixed energy supply unit is designed to facilitate multiple, 16A, 32A and 63A low pressure connections.
It comes in the simple version (for up to 6 16A sockets) or double version (up to 12 16A sockets), in the power dispensing version, in the water dispensing version as well as a mixed utilities dispensing version: power and water.
The great sturdiness of the energy dispensing column makes it ideal to be permanently installed in public areas.
Simple version
Ground level measurements: L 470 x I 330mm
Height: 900 mm
Three parts: a base, a body module and a cast aluminium casing.
|
|
Accmar%u2019s watertight dock power pedestals are built in the USA to withstand the harshest weather and dockside conditions following strict UL guidelines to ensure safety. Our dock pedestals are available in two sizes: 45" or 38" in height.
Accmar%u2019s power pedestal comes standard with outlet capacity for five receptacles (up to 200 AMPS max per pedestal), water faucet and one hose holder. All are compactly mounted in high quality 5052 H32 marine grade aluminum with 1/8" wall thickness & white powder coated casing (custom colors available).
Each marina power pedestal is equipped with an attractive sensor controlled, low glare, fluorescent lighting fixture to illuminate your dock area. Stainless steel latched door hardware protects the unit%u2019s Square D circuit breakers. Cable TV/telephone receptacle/electric meter & key lock hardware can be added upon request. Special design features ensure maximum life of the unit.
|
|
Additional accessories (light columns, cleats, fire posts)
Additional accessories make a stay in the marina as convenient and safe as possible. Available items include:
* Light columns with water supply taps and electricity sockets illuminate the moorings
at night and provide water and electricity for the berthed boats
* Cleats and fenders for yachts and motor boats enable mooring of mixed boats
* Fire safety posts guarantee fire safety of the boats during their stay in the marina
* Wooden decking, gangways, ladders, foot bridge rails made of larch are low cost,
durable and economical
|
|
The new Terminal Boat, conceived and designed by Coelin in cooperation with the best industrial designers, is offering a simple and elegant line that can supplement and enrich tourist ports, piers and marinas.
It is perfectly suitable for distributing and controlling electric energy and drinkable water. Moreover, it is complete with low-consumption lamps that can light the floor surface.
A practical door with a key lock can give access to all control and protection
members. The two-face structure is completely made of AISI 316 stainless steel, which can be polished, glazed or painted to meet the customer's requirements.
Specifically conceived for extremely heavy-duty operation, it can provide for
excellent impact strength and durability.
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
Accmar%u2019s watertight dock power pedestals are built in the USA to withstand the harshest weather and dockside conditions following strict UL guidelines to ensure safety. Our dock pedestals are available in two sizes: 45" or 38" in height.
Accmar%u2019s power pedestal comes standard with outlet capacity for five receptacles (up to 200 AMPS max per pedestal), water faucet and one hose holder. All are compactly mounted in high quality 5052 H32 marine grade aluminum with 1/8" wall thickness & white powder coated casing (custom colors available).
Each marina power pedestal is equipped with an attractive sensor controlled, low glare, fluorescent lighting fixture to illuminate your dock area. Stainless steel latched door hardware protects the unit%u2019s Square D circuit breakers. Cable TV/telephone receptacle/electric meter & key lock hardware can be added upon request. Special design features ensure maximum life of the unit.
|
|
|
|
|
|
|
The Terminal Fold Away is designed to distribute electric power and services in general, including water, compressed air, TV signals, etc.
The terminal structure is built entirely from AISI 304 stainless steel and then coated with polyurethane powder.
A nodular cast iron cover attached to the upper part of the terminal is available in both a normal or fill-in version which means it can be perfectly matched with any pavement.
The terminal is equipped with various services, according to requirements, and is completely buried.
It can be extracted by using a hand crank or a simple battery-powered drill.
As a result, pedestrians can walk on and heavy vehicles can travel through this area in complete safety.
The Terminal Fold Away can be used in various locations such as town squares, market areas, exhibition pavilions, condominiums or for general applications in the industrial sector.
The Terminal Fold Away is indispensable in all areas that require a temporary hook-up to specific systems, which can then be removed, leaving the area in its original condition..
Last, but not least, the Terminal Fold Away is completely environmentally-friendly, shockproof and protected against vandalism.
|
|
The JOLLY TOWER model JT01 it's the most versatile retractable unit of the range; it allows to install any type of electric sockets up to 125A.
Thanks to the loading resistance of the whole structure up to 40 tons the JT01 is particularly suitable for use in places transited by heavy vehicles ( HGV areas ).
The JOLLY TOWER JT01 is composed by a fixed structure of concrete RBK 300, by a mobile part of stainless steel that includes the top cover, the boxes for the equipment with protection degree IP66 and the lifting system.
Lifting and lowering of the structure are effected by a crank handle.
This pop up unit, with round or rectangular cover, it's available completely closed or to fill with any type of flooring for a perfect integration with the surrounding environment.
|
|
The retractable unit for power supply was invented by Urbaco to facilitate energy supply into a unit that retracts completely into the ground after use. It allows power supply, telephone or water. The Urbaco power supply retractable bollard was awarded the Bronze Pyramid at the 1993 International Innovation Contest in Paris.
With just the turn of a key, the bollard rises alone and locks automatically in the raised position. A push of the foot causes the bollard to retract and lock in the lower position. The waterproof level of the units protects the electrical components from oxidizing and from bad contacts. Wires and extension cables are thus prevented from running on the ground, avoiding possible hazards. Robust design makes your energy supply completely vandal-proof. The cover, casing, carriage, cross hitch and rails are guaranteed for 10 years.
|
|
|
|
