|
|
The Arctic service pedestal stands out because of its compact design, while still being able to host a lot of service possibilities. Its slender design makes the Arctic the perfect compact addition to Seijsener’s pedestal range.
Main characteristics:
• Built-to-last thanks to it’s sturdy housing, made of extruded aluminum;
• Co-extruded fast assembly sections make for a minimum of installation time;
• Only little space required (dimensions 160 x 100 x 850mm),
• A multi-purpose service pedestal (fit for power outlets and water tap but also as lighting device or safety station) which contributes to the uniform appeal of a marina.
|
|
Super Yachts
Electro-Tec can provide a large range of services for super yacht berths such as:
Power supplies up to 600A 3 Phase
Socket outlets or directly connected
Water supplies up to 2”
TV / Internet / Data outlets
Sanitation pump out outlets
Super yacht pedestals can be supplied with all Electro-Tec metering systems for both electric and water services.
E-Max Superyacht Pedestal
The E-Max is designed to offer a large amount of services to super yacht berths. Capable of accommodating up to 400A 3 Phase socket outlets (or 600A 3 Phase direct connection) and all services detailed above, E-Max is the perfect solution for super yacht berths.
|
|
FRS2
The remote connection unit is designed to be used in conjunction with a 2+2 master control unit. Manufactured from fibreglass and with either one or two socket outlets, the unit is controlled and supplied from a master service pedestal at an adjacent berth. BS EN60898-2 socket outlets, rated at either 16A or 32A can be mounted onto the remote unit and it is supplied with a galvanised shoe, designed to be fixed to your pontoon.
|
|
Service bollard type Pacific
PACIFIC: multifunctional service bollard in aluminium
The PACIFIC pedestal is the next of a new generation bollard constructed from extruded aluminium profile. More compact, lean yet very strong and rigid and fitted with one compartiment only. Leaving no room for any torsion resulting in tightly closed doors for a watertight solution. Different arrangements for electrical services standard with 4 CEE socket outlets; with w/o pre-payment, Sep-Card and Sep-key full automatic meter reading and control. Illumination optional by two downlight LED’s fitted underneath the top cover or impact resistant polycarbonate light head fitted with energy saving lamp. Optional with water tap and hose reel.
|
|
T1 combines the classic and timeless TallyKey look with a simple and cost effective design.
The T1 body is made of impact resistant polyethylene, which makes it last for many years in any kind of environment.
All the electrical parts, even the outlets, are protected by an elegant, sealed alu-cover, rendering the product waterproof according to the IP56 standard.
The T1 gives you long lasting quality and many years of trouble-free operation...
|
|
If you have transient boat slips, Eaton Corporation-Marina Power and Lighting has developed their newest product for your situation.
The new "Smart Start" pedestal is activated by the swipe of a credit card. A kiosk will be centrally located at the marina and will control up to 32 power pedestals. When a boater wants to use a slip, they will enter the slip number and amount of time they would like and will then be asked to swipe a card in order to activate the pedestal. Once the chosen time is up, the pedestal will shut down. No more free power!
The "Smart Start" pedestal will not only prevent transient boaters from stealing power, but it will also eliminate the need for 24 hour monitoring of the slips. Boaters will be able to come in at any time of the day and activate a pedestal.
|
|
|
Card Meters are one option for the marina operator to recover money for electricity consumed in 'pre-pay' rather than credit format. The reconditioned Card Meters are accessed through customer reset flaps. A card is purchased with a pre-determined value loaded onto it which, when inserted into the meter, loads that value onto the meter. The meter then counts down the pre-loaded value until it is consumed. An emergency credit value of £1.00 is available on each meter. Alterations to the tariff / emergency credit value can be made by the use of a Meterman card.
|
|
|
|
|
|
|
The ESB Mini is a compact variation of the ESB Power Pedestal and is manufactured from the same high quality materials. Designed specifically for marinas requiring basic services or less obtrusive deck mounted equipment, the ESB Mini can provide power up to 32A and is supplied as standard with 15W photocell controlled lighting. The ESB mini is available in most colours and can also be supplied with L.E.D. lighting.
Metering is also available with a maximum of two metered sockets per unit and can utilise Electro-Tec Sentinel metering systems.
Materials
The pedestal outer material can be provided in any material including:
PVC Foam
Electro-Tec only supply UV stable PVC foam materials. PVC is tried and tested in environments worldwide and is available in almost any colour.
Aluminium and Plastic Composite
Composite is an incredibly durable and UV stable material. Consisting of two 0.5mm Aluminium shells thermo-bonded to a polyethylene core, composite is incredibly durable. Due to the unique properties of this material, it also acts as a great insulator by keeping electrical equipment at a constant temperature and within its operating temperatures. This material is available in almost any colour including brushed stainless effect and mirror finish.
|
|
|
Module Built in compliance with CE and IEC 364-7-709 standards. Protection class IP 67. Material HDPE UV protection. Dimensions 250x350x800h mm. Interlocked sockets 16A to 125A. Protections Id 30mA - Main switch. Cable connection 3P+N T - input/output 16 mm to 300 mm. Water supply ½%u201D ball valve tap . Lighting 9W 240 VCA low-consumption florescent lamp . Fittings for computation of consumptions / links / communication: Electricity meter Progressive electricity meter. Display kW/h consumption for each socket Water meter Liter-counter and display of progressive metering of each output Pre-paid system Pre-paid on transponder Communication Intercom system Connections TV-SAT, Telephone, Internet
|
|
UM2I/UM4I
Non-Metered Option
Two or Four Way Bollards without the metering option. The switchgear is housed beneath weatherproof polycarbonate reset flaps which have a locking facility. The standard Residual Current Device arrangement is to provide one device for a two way unit and two for a four way. Alternative options are available upon request.
|
|
|
The details count. The expertise of Poralu Marine is not limited to the manufacturing and installation of your marina. We offer a wide range of services and products to provide a maximum level of comfort to your customers. You can choose your service bollards, fuel and pump out stations, combining accessories such as handrails, ladders, boxes, cranes, berth number tags etc...
|
|
|
|
|
|
|
Quality in every detail
TallyKey's pedestals are made exclusively of quality materials, ensuring a long working life.
The pedestal itself is made of aluminium, while bolts, shafts and screws are in stainless steel.
If the pedestal has a lamp in the top, the "glass" is made of impact-resistant plastic.
The TallyKey T2 pedestal is thus strongly equipped to survive many years of outdoor use, even in the harsh and aggressive environment at a harbour.
A carefully thought-out detail is the special safety washers with which the base is mounted. If a pedestal is bumped or a boat departs from land and has forgotten to uncouple from the pedestal, the safety washers are broken first - the pedestal itself suffers no damage and it can be remounted immediately with new safety washers.
Flexible and rational production
TallyKey pedestals are not mass produced, but made to customer specifications for every installation. The construction itself was nevertheless developed for rational mass production and it therefore offers the market's best combination of quality, durability and price.
The slender design speaks for itself and actively contributes to guests' positive impression of your harbour or camping site.
The T2 pedestal is available in two heights: 83 and 113 cm (with lamp: + 17 cm).
The higher pedestal was specially developed for camping sites, where it complies with European standards which require, among other things, 80 cm from the ground to the bottom power socket.
|
|
Maricer have introduced a new LED lighting panel, which can be fitted onto any of their range of marine service pedestals.
The LED panels are waterproof to IPX7 and are made entirely from tough, non-corrosive UV stable materials, to compliment the lighting diffuser used in the standard pedestal range. Each panel contains the latest multi chip white LED's and offer very low power consumption at 0.2 amp each with a 30,000 hour meantime before failure. Up to four panels can be mounted on to the lighting head giving you the option of directional lighting of your choosing on your pontoon system.
|
|
Three Phase Pedestals
Large boats and super yachts demand a large electrical supply and the Maricer Three Phase Pedestal Range can accommodate this requirement. Shown here with two 400V 63A 3 Pin + Neutral + Earth IP67 Socket Outlets, each socket outlet is protected by an earth leakage and over current device. A 4 Pole isolator is incorporated into the design to enable safe pedestal isolation. As with all pedestals in the Maricer Range, illumination can be via 16W 2D lamps or LED with photocell 'dusk to dawn' operation
|
|
|
One of our most popular units, the all-purpose Lighthouse pedestal has a wide range of features. With units in service around the world, this stylish power pedestal is recognized for its practicality and exceptional durability.
|
|
MEC 2+2
A four way card metered pedestal in black acrylic capped ABS, with a tough 'pinseal' finish to greatly increase scratch resistance. The reconditioned card meters are accessible through reset flaps. Designed to be installed in conjunction with the FRS range of remote connection units, all switch gear and metering is contained within the MEC2 main pedestal.
|
|
|
This compact metered module is designed for use with the UM/DM/MEC range of bollards to offer a remote metering facility. The control devices for the RD2 are contained in the master supply bollard (UM, DM or MEC) and cable from that will supply the sockets on the RD2. This unit would generally be sited opposite the master unit.
|
|
DM2I/DM4I Metered Option
Two or Four Way Bollards with the metering option. A range of meters can be supplied from the 100A rated Ofgem Approved meter primarily used in the two way unit to the din rail mounted single module 32A rated version utilised in the four way unit. Computerised metering and energy control can also be provided and an alternative brochure covering this option is available upon request. Illumination is provided by means of 2D 16 control gear and lamp along with a 6A Single Pole MCB and P12R Photocell.
|
|
Stainless Steel Pedestals
Manufactured from 1.0mm 316 Grade Stainless Steel, this pedestal range incorporates all the benefits of our PVC internal chassis and base plate with a tough stainless steel skin suitable for marine environments. All the usual configurations are available including water, TV and three phase options. The product can also be offered in 304 Grade Stainless Steel for less harsh environments.
|
|
Service Utility Pillar
Your boatyard or canal location may require the most durable and vandal resistant connection pillar possible. You can have ultimate control of access to the socket outlets and switchgear by means of the lockable door. Up to four 16A 2 Pin + Earth Socket Outlets are located on the aluminium chassis with the switchgear behind a reset flap. The pillar is manufactured from 5.0mm S235 hollow section with a 300mm mounting base. 16A supply plugs can be in place in up to four outlets and the door then locked shut.
|
|
|
|
|
|
|
The TallyKey T6-pedestal was developed for the supply of
electricity and water in marinas and harbours.
The pedestal's elegant and maritime design makes a positive contribution to the guests' general impression of the harbour,
- and the choice of materials makes it robust and maintenance-free.
Brightens any environment
All T6 pedestals are supplied with lighting in the top in the form of two 11 watt low-energy
bulbs, safely placed behind an impact resistant plastic cover.
The pedestal can therefore be used solely to provide elegant lighting, or in combination
with the provision of power and water.
The T6's many possible combinations make it the market's absolutely most useful and
flexible power and water supply pedestal.
We make the T6 to order in accordance with individual needs and wishes, ensuring that
you gain the greatest possible return on your investment.
Safety and durability
All TallyKey pedestals are made in weather-resistant anodised aluminium. Screws, bolts
and shafts are in acid-resistant steel, and the lights are protected by an arched aluminium
top cover and an impact-resistant plastic cover.
Only the highest quality materials are used in the production, ensuring that the pedestal%u2019s
useful life is at least 15-20 years and that it requires the least possible maintenance.
TallyKey pedestals of course comply with all relevant standards and statutory requirements
for units of this type.
|
|
|
From the company that is known for its high quality innovations, Eaton is the only company to offer a self-contained dual-phase mega yacht unit. Made out of long lasting stainless steel, this mega yacht unit has a copper-wound, low noise transformer that is double insulated and epoxy overcoated.The mega yacht unit delivers both single-phase and threephase power to serve most mega yachts. Helping to keep your marina environment tranquil, the mega yacht unit has a low noise, highly efficient transformer that has isolation mounts to ensure a very quiet operation
|
|
The extension of the existing range of power pedestals with the Atlantic series allows for greater flexibility and faster assembly of control switches, terminal blocks and other control gear to manufacture a marina service stand that will accommodate all services required on a modern marina.
Constructed in extruded, tough, anodised aluminium to tight dimensions. The unit has two hinged doors to separate compartments for water and electricity. Hinges are also of aluminium to eliminate corrosion.
Sloping side panels with grooves give the enclosure a leaner appearance. The lockable service doors face the walkway to avoid blocking the pontoon finger when in service.
|
|
|
Truly the flagship of our unitized pedestal line, the Admiral SS possesses amperage capabilities up to 500 Amps and voltages of 480/277Three Phase, 120/240 Single Phase and combinations of these receptacles all in one unit to serve nearly any size MegaYacht.
|
|
|
The Lighthouse-SS offers the same standard features and available options as the standard Lighthouse. But, like all of the stainless steel products manufactured here, the Lighthouse-SS is made with high quality 316L stainless steel for superior quality and performance.
|
|
|
Five years of development and thirty prototype models have yielded the most innovative mini-power center available. The Newport Harbor Mate represents the leading edge of Marina Power and Lighting equipment with more features than any other unit for its size. This rugged unit can be mounted on a piling, a dock box, or a pedestal. As with all Eaton's Marina Power and Lighting equipment, it meets the strict Underwriters Laboratories standards.
|
|
|
The Hatteras Light is an elegant and low cost alternative to the Lighthouse. It utilizes the same 360 degree light assembly as the Lighthouse, yet is only 30 inches tall. Thousands of these attractive pedestals are found not only in marinas, but also around pools, deck areas, boardwalks and landscape areas. The housing will never rust or corrode and comes with a limited lifetime warranty. This unit is popular for smaller slips at marinas with the Lighthouse and for private docks.
|
|
|
The ESB Power pedestal has evolved continually for over a decade. Now capable of accommodating more equipment than ever before the ESB is a versatile option for marina services. The ESB has a distinct advantage to its competition – it will not corrode. The ESB internal support chassis is manufactured from a heavy duty medium density polyethylene and contains no metal parts. This means it can be installed in the most exposed locations and will never suffer from corrosion.
|
|
Enhance the look of your pontoon with our ‘wood effect’ pedestals. The options shown here are a two way pedestal with electric and water outlets and a Pontoon Light. Manufactured from 5.0mm Fomalux with a foil laminated finish, the process involves the same procedure as used by many conservatory, replacement window and door manufacturers when making their product.
The finish is therefore very resilient and well tested, ensuring longevity. All sizes of pedestal and levels of equipment can be offered in this finish
|
|
African Ivory Pedestals
If your looking for a stylish pedestal either to match the finish on your pontoon or to offer a contrast to enhance it's appeal, the African Ivory Range is all you need. Manufactured from 4.0mm Acrylic Capped ABS the plastic has a 'pinseal' finish to add extra scratch resistance, ideal on a busy pontoon.
The two sizes shown here are the 840mm and 600mm high units.
The alternative 1130mm high unit can also be supplied within this range along with varying levels of equipment to suit your needs.
|
|
|
|
