|
|
|
The distributor model Geo consists of a structure made of SMC strengthened thermosetting material, hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 standard and inalterable within a temperature range of - 40°C to +110°C. The structure is fixed on a internal carring frame made of stainless steel. All its metal components and its bolts and screw are of stainless steel.
|
|
Electricity link bollard made of inox.
- Bollard's size specifications are the following: 400x280x1050 milimeters.
- The usage of the bollard entails both water and power supply in the seascapes and the marinas, motor camps and such.
- Maximum vertical cut of the electrical cable is 4x70 square milimeters.
|
|
- Electricity link bollard made of polyester. It contains a prop, within which there is the entire plumbing system. It further contains a locker with the small doors, which contains the entire wiring, and a roof, within which there is lighting.
- The usage of the bollard entails both water and power supply in the motor camps and the seascapes.
- Maximum vertical cut of the electrical cable is 4x35 square milimeters.
|
|
Electricity link bollard, along with the base, made of a vibrated concrete.
Front equipment, and the back panels are made of polyester, and the doors of the base are made of aluminium, and they are painted as well.
- The enitre electronics is inside the bollard, and the whole plumbing is in the base of the bollard.
- The usage of the bollard entails both water and power supply in the seascapes and the marinas, motor camps and such. The bollard is equipped according to a certain request.
- Maximum vertical cut of the electrical cable is 4 x 70 square milimeters.
|
|
|
The distributor model Minus consist of a structure composed of elements made of SMC and BMC strengthened thermosetting material,hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of 40°C to +110°C. Safeguarded against UV rays and early ageing. All its metal components and its bolts and screws are of stainless steel.Distributor according to the EN60439 standard
|
|
|
The distributor model Mistral consist of a structure made of stainless steel and a top made of SMC strengthened thermosetting material painted with RAL color on request.
|
|
|
The distributor model Aquarius consist of a structure composed of elements made of SMC and BMC strengthened thermosetting material,hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of 40°C to +110°C. Safeguarded against UV rays and early ageing. This distributor is equipped with shockproof polycarbonate injection molded doors, V2 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and provided with treatment against UV rays.The doors are opened by pulling upwards and closed by lock and key.All its metal components and its bolts and screws are of stainless steel.
|
|
|
The distributor model Aquarius consist of a structure composed of elements made of SMC and BMC strengthened thermosetting material,hot flow cast and pressure-moulded, V0 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and inalterable within a temperature range of 40°C to +110°C. Safeguarded against UV rays and early ageing. This distributor is equipped with a fixed panel on the side "B" ana a shockproof polycarbonate injection molded door on the side "A", V2 Class self-extinguishing, 4.5 mm thickness, in compliance with UL94 Standard and provided with treatment against UV rays.The door are opened by pulling upwards and closed by lock and key.All its metal components and its bolts and screws are of stainless steel.
|
|
The first two segments are separated with a bulkhead, to prevent water penetration from the lower anterior area, which holds the entire plumbing.
Due to safety reasons, lower and middle segment (1040 mm) are equipped with a vertical bulkhead, which separates the posterior area, holding the entire electric installation, from the anterior area, holding the plumbing (lower segment) and user equipment (connectors, programmable key socket, keyboard and LCD).
The level of mechanical protection of the cabinet is IP56.
The entire cabinet, or its constituent segments, can additionally be panted through electrostatic spraying procedure accompanied by high temperature torrefaction, and all according to buyer’s preferences and requests.
|
|
- Electricity link bollard made of inox A4(316) class.
- Bollard's size specifications are the following: 400x250x900 milimeters.
- The usage of the bollard entails both water and power supply in the seascapes and the marinas, motor camps and such.
- Maximum vertical cut of the electrical cable is 4x70 square milimeters.
- The bollard is to be painted using the electrostatic procedure in RAL-color in accordance with request.
|
|
- Electricity link bollard made of inox A4(316) class with a front panel and a roof made of polyester.
- Bollard's size specifications are the following: 200x200x100 milimeters.
- The usage of the bollard entails both water and power supply in the seascapes and the marinas, motor camps and such. The bollard is equipped according to a certain request. Maximum vertical cut of the electrical cable is 4x35 square milimeters.
- The bollard is to be painted using the electrostatic procedure in RAL-color in accordance with request.
|
|
- The cabinet is made of A4 (316) stainless steel sheets.
- Cabinet size is 200x140x700mm. The cabinet protection rate is IP56. The cabinet can be repainted by electrostatic painting technique, dried at high temperature, colour on customer request.
- The size and weight of the cabinet is especially suitable for marinas with floating pontoon and camps, where it is important that the cabinet takes as less space as possible.
- The cabinet contains:
- 4 electricity socket
- 2 water faucet The cabinet should be attached by 4 stainless steel screws to a levelled surface.
- The electric cable and the water pipes are attached through the bottom of the cabinet. The internal illumination is located in the cabinet roof, it makes the access to the connections easier, there is also an orientation light available.
- There is a maintenance window on the front of the cabinet.
|
|
THE M-TECH SERVICE PEDISTAL
Finally there is a service pedestal which matches the need of the boat owneran marina operator
The boat owner requires safe and convenient power, water and lighting - perhaps even a TV and telephone or modem hook-up. Of course the marina operator needs these features too, but in addition looks for durability, ease of maintenance and cost effectiveness.
|
|
|
By inserting a transponder key or card provided with pre-paid credit into the sealed reader, the client can select an energy socket and/or water tap.The distributions will start as soon as the client will have extract his how key and continues until either all the credit available has been used or the operation is cancelled and the residual credit refunded simply by reinserting the key or card. The same electronic key can be used for other services as: access control, showers, etc. Credit detraction is scaled in correspondence to the real consumption of energy and water. Note: The distributor with pre-paid system allow to swith on automatically the light without a dedicated electrical line.
|
|
The pedestals and electric wardrobes of distribution CEI are designed for the harbors of fishing, the harbors of pleasure and the zones of careenages.
All our pedestals are equipped:
largely dimentionnés connector blocks of connection
of a general circuit-breaker and a distributer
of a mounting base to the quay or the stainless steel dock (316L) of very great resistance against the shocks caused by the boats or other wrenchings
of a screws and bolts stainless
Our pedestals, just like our stations of pumping, are available in completion wood or of completion stainless in order to be integrated in all the environments.
|
|
|
The Sourcelec range makes it possible to feed the bâteaux ones moored in the harbors of pleasure and the marinas in electricity, water, phone and television.
|
|
|
Higher stainless 316L equipped with exceptional mechanical properties. Great resistance to the salt sprays.
|
|
Tank equipped with a removable grid and 2 to 4 pipes Ø 50 mm for waste water connections. General discharge connection to a tube with an inside diameter of 100 mm. Accepts Sourcelec 100 and 200 stainless steel base.
Frost resistant.
|
|
The fixed energy supply unit is designed to facilitate multiple, 16A,
32A and 63A low pressure connections.
It comes in the simple version (for up to 6 16A sockets) or double
version (up to 12 16A sockets), in the power dispensing version, in
the water dispensing version as well as a mixed utilities dispensing
version: power and water.
The great sturdiness of the energy dispensing column makes it ideal
to be permanently installed in public areas.
Simple version
Ground level measurements: L 470 x I 330mm
Height: 900 mm
Three parts: a base, a body module and a cast aluminium casing.
|
|
Compact, durable and economical
Painted galvanized steel
Pedestal or surface mount units
Pedestal available with loop-feed lugs
Metered or unmetered
UL listed
|
|
|
|