|
|
|
Rolec has the largest range of super yacht services available in the marina services industry. The Megamaster was designed clearly with the super yacht in mind. This unit is completely adaptable and can be manufactured to suit your exact requirements. The Megamaster is constructed around a heavy-duty aluminium chassis and can be finished with one of three different outer covers. Electricity provided by the Megamaster can reach up to 600amp three phase with water supplies up to 3".
|
|
Five years of development and thirty prototype models have yielded the most innovative mini-power center available. The Newport Harbor Mate represents the leading edge of Marina Power and Lighting equipment with more features than any other unit for its size. This rugged unit can be mounted on a piling, a dock box, or a pedestal. As with all Eaton's Marina Power and Lighting equipment, it meets the strict Underwriters Laboratories standards.
Main Features include:
Receptacles surface-mounted at top of unit for easy replacement and meet NFPA 303 3-14.1c's required 24" above the dock when mounted on a 30" dock box
30/50/20 amp receptacles available
Downward indirect lighting
Loopfeed copper bus bars
Easy-mounting brackets for piling, dock box, pedestal, or covered dock uprights
Phone & cable TV outlets available
Thermoplastic housing with lifetime warranty
Door hinge not pop riveted
Housing completely non-conductive
Galvanized, stainless, or aluminum pedestals available
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
Water available with pedestals
|
|
Truly the flagship of our unitized pedestal line, the Admiral SS possesses amperage capabilities up to 500 Amps and voltages of 480/277Three Phase, 120/240 Single Phase and combinations of these receptacles all in one unit to serve nearly any size MegaYacht.
Standard Features:
Heavy Stainless Steel Housing that is Powder Coated with a Polyester Resin and Over-coated with a Heavy Clear Coat
Hardwire Capability for any One Voltage
Four 100A Receptacles of any Two Voltage Combinations such as 277/480 Three Phase, 120/208 Three Phase, or 120/240 Single Phase
When the 100A 120/240V Receptacles are Used, Two 50 Amp 120/240V Receptacles can also be Provided for a Total of 500 Amps
Photocell Controlled 13 Watt Fluorescent Light with Clear Lens that Provides 360 Degrees of Lighting
Backlit Faceplate For Easy Receptacle Plug-in at Night
|
|
For the longest lasting marine power pedestals, nothing is better or will last longer in the marine environment than our new stainless steel housing. We have worked more than two years to design a stainless steel pedestal that would meet all the codes and marine requirements, yet be easy to install and most importantly be maintenance free and user friendly.
Main Features include:
Available with Lockable doors that fully close
Photocell controlled 13 watt fluorescent light provides 360 degree lighting availabe in in clear or amber lenses
Corrosion resistant fine stranded tin plated copper wire for flexibility
Hose and cable brackets and 3/4 inch hose bibs with stainless steel handles
Maintenance free stainless steel housing with Lifetime Warrant
Rated 250 to 500 amps with copper bussing which allows for 20, 30, 50 amp receptacles
Electronically metered for direct or computer readouts
Easy replacement of breakers, receptacles, meters, and lights
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
Dual water hook-ups and TV/phone connections
|
|
The Hatteras Light and the Lighthouse use the same light assembly, providing a 360 degree light pattern. This light pattern is important in a marina because it lights both the dock and finger piers, yet does not shine in the boats because it's directed downward. Best of all, the bulb will last about 3 years and costs about 30 cents per month to operate.
The Hatteras Light is just 30" tall, and can be equipped with two 20 amp GFI or two 30 or 50 amp marine receptacles or a combination of 20, 30, and 50 amp receptacles. Introduced in 1993 and with thousands in service, this popular unit offers a low cost alternative to the Lighthouse for smaller boat applications. The attractive Hatteras Light will welcome your guest in style. They're great not only for marinas, but also for your dock, pool, lawn and deck area. To guarantee durability, the Hatteras has also been tested by Underwriters Laboratories.
Main Features include:
Photocell controlled 13 watt fluorescent light provides 360 degree lighting
20 amp GFI duplex receptacle and thermal magnetic circuit breaker
30 amp 125v marine twist lock receptacle and thermal magnetic circuit breaker
50 amp 125/250v marine twist lock receptacle and thermal magnetic circuit breaker
Hose bib and adapter/cable brackets
Tough thermoplastic housing with two-part polyurethane paint with UV inhibitor
Rated up to 100 amps with loopfeed copper bus bars
7.5" square mounting base and a maximum diameter of 13.5" around top of pedestal
Easy replacement of breakers, receptacles, meters, and lights
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
TV/phone connections with weatherproof cover
|
|
|
The new line of services distribution Jolly Magnum has been designed to offer a strong and harmonic product for all those situations where safety and aesthetics have to coexist in the respect of the regulations in force. These distribution boards for outside are realized with materials of great resistance to corrosion and painted with polyester powder coating to maintain their characteristics for a long time.
|
|
Characteristic Electrical workers
Nominal tension: 240/400V
Nominal frequency: 50/60HZ
Nominal current: 63 To
Switch gen. max: 4P-63A-10kA
Taken max: 3P+N+E - 32 To
Morsettiera max: 16 mm2
Normative standard: EN 60947-1
EN 60439
|
|
PHOCEA RANGE
distribution of water and electricity (4 sockets max)
structure made of polyester armed fiberglass
integrated lighting
differential breaker 30mA
energy control in option
colour in option
|
|
CORALIA RANGE
structure made of polyester armed fiberglass and marine steanless steel (316L)
IP55 enclosure
differential breaker 30mA
integrated lighting
energy control in option
large choice of colour in option
electric socket single-phase or 3-phases
up to 125A
|
|
CALYPSO RANGE
distribution of water and electricity (4 sockets max)
structure made of polyester armed fiberglass
integrated lighting
differential breaker 30mA
energy control in option
colour in option
|
|
Golden Oak Pedestals
Enhance the look of your pontoon with our 'wood effect' pedestals. The options shown here are a two way pedestal with electric and water outlets and a Pontoon Light. Manufactured from 5.0mm Fomalux with a foil laminated finish, the process involves the same procedure as used by many conservatory, replacement window and door manufacturers when making their product. The finish is therefore very resilient and well tested, ensuring longevity. All sizes of pedestal and levels of equipment can be offered in this finish.
|
|
|
Marine Technologies unveiled their newest range of marine pedestals named “The Platinum” at the 2008 Sanctuary Cove Boat Show , The Platinum pedestals were designed to meet the ever increasing requirements for more and more services within the pedestals to provide for the needs of larger vessels. It is able to accommodate power outlets from 15 Amp to 250 Amp, and 400 Amp direct connection for Mega Yachts. It’s robust and modern design will enhance any marina , whilst still maintaining the high standard of quality and style that Marine Technologies is renowned for.
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
MP1100XL
Containing 3Phase - 63A Socket Outlets, together with single phase, TV, Phone, water tap and electronic kWh metering.
Stainless Steel - Aluminium.The ultimate pedestal for strength and quality.
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
MP1100XL
Containing 3Phase - 63A Socket Outlets, together with single phase, TV, Phone, water tap and electronic kWh metering.
|
|
Modern Marinas are designed to last well over 25 years, however most service pedestals built from galvanised steel or plastic will need replacing well before that. The integral strength in the M-Tech pedestal is aluminium and stainless steel, a combination which will outlast any other material used in the construction of service pedestals.
Should damage occur from collision with vessels, the M-Tech pedestals are very easy to repair.
Our pedestals are tailor made to the individual requirements of the marina operator and can be fitted with single and /or three phase power, water and electricity metering,
Photo-electric cells to switch the units on and off, phone / data outlets, lockable doors, weatherproof speakers and electrolysis blockers.
Containing 3Phase - 200/250A Socket Outlet, RCD protection. This pedestal is suitable for Mega Yacht berths, and can be fitted with outlets to 400A.
|
|
|
S 700 L is a distributing one of services constructed in satinato steel AISI 316 L with finishes or polished. The taken ones is interbloccate electrically and automatically. The contabilizzazione system comes activated through the use of a transponder in the intelligent taken one andpower.
|
|
The JOLLY TOWER model JT01 it's the most versatile retractable unit of the range; it allows to install any type of electric sockets up to 125A.
Thanks to the loading resistance of the whole structure up to 40 tons the JT01 is particularly suitable for use in places transited by heavy vehicles ( HGV areas ).
The JOLLY TOWER JT01 is composed by a fixed structure of concrete RBK 300, by a mobile part of stainless steel that includes the top cover, the boxes for the equipment with protection degree IP66 and the lifting system.
Lifting and lowering of the structure are effected by a crank handle.
This pop up unit, with round or rectangular cover, it's available completely closed or to fill with any type of flooring for a perfect integration with the surrounding environment.
|
|
Five years of development and thirty prototype models have yielded the most innovative mini-power center available. The Newport Harbor Mate represents the leading edge of Marina Power and Lighting equipment with more features than any other unit for its size. This rugged unit can be mounted on a piling, a dock box, or a pedestal. As with all Eaton's Marina Power and Lighting equipment, it meets the strict Underwriters Laboratories standards.
Main Features include:
Receptacles surface-mounted at top of unit for easy replacement and meet NFPA 303 3-14.1c's required 24" above the dock when mounted on a 30" dock box
30/50/20 amp receptacles available
Downward indirect lighting
Loopfeed copper bus bars
Easy-mounting brackets for piling, dock box, pedestal, or covered dock uprights
Phone & cable TV outlets available
Thermoplastic housing with lifetime warranty
Door hinge not pop riveted
Housing completely non-conductive
Galvanized, stainless, or aluminum pedestals available
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
Water available with pedestals
|
|
EQUINOX RANGE
Stainless steel 316L
Quick coupling watert taps or 1/4 turn taps
connection with flexible 30cm 20/27
color in option
|
|
Our primary goal in developing the T2 pedestal was to create an attractive and user-friendly supply unit for power and water at marinas, harbours and camping sites.
The pedestal is available with 2, 4 or 6 power outlets with the possibility of one- or three-phase outlets up to 32 amps. One or two water taps and a hose rack can also be installed.
The T2 pedestal is thus a complete utility supply solution - which is both simple and extremely robust.
|
|
|
The Roline range has been developed to provide both electricity and water services in a compact low-level unit. Manufactured in aluminium powder coated to a colour of your choice, the Roline range offers a simple but effective marina services solution. Metering: Miniature kWh metering is available on the Roline range. Illumination: Downward facing deck lighting has been designed as part of the Roline range. Remote units: A range of remote deck level electrical socket units also compliment the Roline range.
|
|
Service Utility Pillar
Your boatyard or canal location may require the most durable and vandal resistant connection pillar possible. You can have ultimate control of access to the socket outlets and switchgear by means of the lockable door. Up to four 16A 2 Pin + Earth Socket Outlets are located on the aluminium chassis with the switchgear behind a reset flap. The pillar is manufactured from 5.0mm S235 hollow section with a 300mm mounting base. 16A supply plugs can be in place in up to four outlets and the door then locked shut.
|
|
The TallyKey T6-pedestal was developed for the supply of electricity and water in marinas and harbours.
The pedestal's elegant and maritime design makes a positive contribution to the guests' general impression of the harbour - and the choice of materials makes it robust and maintenance-free.
All T6 pedestals are supplied with lighting in the top in the form of two 11 watt low-energy bulbs, safely placed behind an impact resistant plastic cover.
The pedestal can therefore be used solely to provide elegant lighting, or in combination with the provision of power and water.
The T6's many possible combinations make it the market's absolutely most useful and flexible power and water supply pedestal.
We make the T6 to order in accordance with individual needs and wishes, ensuring that you gain the greatest possible return on your investment.
|
|
|
The Ocean range is a highly sophisticated range of products developed to give the marina a real sense of class. Each Ocean pedestal is manufactured to suit the individual customer's personal requirements, this includes the width, depth and height of the unit. The Ocean pedestal is fabricated in 316L mirror polished stainless steel complete with hinged lockable door, locking away the switchgear.
|
|
|
The Spinnaker pedestal is a new and exciting development from Rolec. It has been designed to compliment any marina, offering a truly modern approach to the world of marina services. The Spinnaker is constructed in hard-wearing GRP, with the outer surface coated in a high-quality gel coat resin as used by today's modern boat manufacturers. If you want to make a statement then the Spinnaker is as good as it gets. Unlimited colours for SpinnakersThe gel coat resin used to final coat the Spinnaker is available in almost unlimited colours.
|
|
The new Terminal, developed and designed by Coelin with deep care in design and using highly advanced technologies, can be used in various sectors answering to camping, touristic seaports and generic public areas requirements and carries out distribution and control of main energy services like electricity, water, air, telephone, TV, intercom, ecc...
The simple and refined design harmonizes and integrates with landscape.
All the functions attributed to Terminal, not only as energy service provider, but also as enlightening device which is an innovation, confer a special personality in styling.
|
|
The new Terminal Boat, conceived and designed by Coelin in cooperation with the best industrial designers, is offering a simple and elegant line that can supplement and enrich tourist ports, piers and marinas.
It is perfectly suitable for distributing and controlling electric energy and drinkable water. Moreover, it is complete with low-consumption lamps that can light the floor surface.
A practical door with a key lock can give access to all control and protection
members. The two-face structure is completely made of AISI 316 stainless steel, which can be polished, glazed or painted to meet the customer's requirements.
Specifically conceived for extremely heavy-duty operation, it can provide for
excellent impact strength and durability.
|
|
|
